From 07c7edd0db441f83eeee087470add5be280cc018 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Tue, 12 Dec 2017 18:29:30 -0600 Subject: dt-bindings: net: add TI CC2560 Bluetooth chip This adds a compatible string for the Texas Instruments CC2560 Bluetooth chip to the existing TI WiLink shared transport bindings. These chips are similar enough that the same bindings work for both. The file is renamed to ti-bluetooth.txt to make it more generic. Signed-off-by: David Lechner Signed-off-by: Marcel Holtmann --- .../devicetree/bindings/net/ti-bluetooth.txt | 61 ++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/ti-bluetooth.txt (limited to 'Documentation/devicetree/bindings/net/ti-bluetooth.txt') diff --git a/Documentation/devicetree/bindings/net/ti-bluetooth.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt new file mode 100644 index 000000000000..6d03ff8c7068 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti-bluetooth.txt @@ -0,0 +1,61 @@ +Texas Instruments Bluetooth Chips +--------------------------------- + +This documents the binding structure and common properties for serial +attached TI Bluetooth devices. The following chips are included in this +binding: + +* TI CC256x Bluetooth devices +* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices + +TI WiLink devices have a UART interface for providing Bluetooth, FM radio, +and GPS over what's called "shared transport". The shared transport is +standard BT HCI protocol with additional channels for the other functions. + +TI WiLink devices also have a separate WiFi interface as described in +wireless/ti,wlcore.txt. + +This bindings follows the UART slave device binding in +../serial/slave-device.txt. + +Required properties: + - compatible: should be one of the following: + "ti,cc2560" + "ti,wl1271-st" + "ti,wl1273-st" + "ti,wl1281-st" + "ti,wl1283-st" + "ti,wl1285-st" + "ti,wl1801-st" + "ti,wl1805-st" + "ti,wl1807-st" + "ti,wl1831-st" + "ti,wl1835-st" + "ti,wl1837-st" + +Optional properties: + - enable-gpios : GPIO signal controlling enabling of BT. Active high. + - vio-supply : Vio input supply (1.8V) + - vbat-supply : Vbat input supply (2.9-4.8V) + - clocks : Must contain an entry, for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names : Must include the following entry: + "ext_clock" (External clock provided to the TI combo chip). + - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address + with the most significant byte first (big-endian). + - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified) + +Example: + +&serial0 { + compatible = "ns16550a"; + ... + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + clocks = <&clk32k_wl18xx>; + clock-names = "ext_clock"; + nvmem-cells = <&bd_address>; + nvmem-cell-names = "bd-address"; + }; +}; -- cgit