From eceac9d2590bfcca25d28bd34ac3294dbb73c8ff Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Fri, 12 Feb 2021 18:23:55 -0600 Subject: dt-bindings: net: xilinx_axienet: add xlnx,switch-x-sgmii attribute Document the new xlnx,switch-x-sgmii attribute which is used to indicate that the Ethernet core supports dynamic switching between 1000BaseX and SGMII. Signed-off-by: Robert Hancock Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/xilinx_axienet.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree/bindings/net/xilinx_axienet.txt') diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index 7360617cdedb..2cd452419ed0 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -38,6 +38,10 @@ Optional properties: 1 to enable partial TX checksum offload, 2 to enable full TX checksum offload - xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload +- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to + support both 1000BaseX and SGMII modes. If set, the phy-mode + should be set to match the mode selected on core reset (i.e. + by the basex_or_sgmii core input line). - clocks : AXI bus clock for the device. Refer to common clock bindings. Used to calculate MDIO clock divisor. If not specified, it is auto-detected from the CPU clock (but only on platforms where -- cgit