From bdea142295ffd76aaec2a90a36ba09ad19660686 Mon Sep 17 00:00:00 2001 From: Sibi Sankar Date: Tue, 17 Jan 2023 14:28:30 +0530 Subject: dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema Convert MSM8996 and similar (MSM8998/SDM845) MSS PIL bindings to schema. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sibi Sankar Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230117085840.32356-2-quic_sibis@quicinc.com --- .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 137 +-------------------- 1 file changed, 5 insertions(+), 132 deletions(-) (limited to 'Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt') diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 5923c0447e2d..573a88b60677 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -9,9 +9,6 @@ on the Qualcomm Hexagon core. Definition: must be one of: "qcom,ipq8074-wcss-pil" "qcom,qcs404-wcss-pil" - "qcom,msm8996-mss-pil" - "qcom,msm8998-mss-pil" - "qcom,sdm845-mss-pil" - reg: Usage: required @@ -32,23 +29,7 @@ on the Qualcomm Hexagon core. - interrupt-names: Usage: required Value type: - Definition: The interrupts needed depends on the compatible - string: - qcom,ipq8074-wcss-pil: - qcom,qcs404-wcss-pil: - must be "wdog", "fatal", "ready", "handover", "stop-ack" - qcom,msm8996-mss-pil: - qcom,msm8998-mss-pil: - qcom,sdm845-mss-pil: - must be "wdog", "fatal", "ready", "handover", "stop-ack", - "shutdown-ack" - -- firmware-name: - Usage: optional - Value type: - Definition: must list the relative firmware image paths for mba and - modem. They are used for booting and authenticating the - Hexagon core. + Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" - clocks: Usage: required @@ -66,41 +47,23 @@ on the Qualcomm Hexagon core. "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc", "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc", "lcc_axim_cbc", "lcc_bcr_sleep" - qcom,msm8996-mss-pil: - must be "iface", "bus", "mem", "xo", "gpll0_mss", - "snoc_axi", "mnoc_axi", "pnoc", "qdss" - qcom,msm8998-mss-pil: - must be "iface", "bus", "mem", "xo", "gpll0_mss", - "snoc_axi", "mnoc_axi", "qdss" - qcom,sdm845-mss-pil: - must be "iface", "bus", "mem", "xo", "gpll0_mss", - "snoc_axi", "mnoc_axi", "prng" - resets: Usage: required Value type: - Definition: reference to the reset-controller for the modem sub-system - reference to the list of 3 reset-controllers for the + Definition: reference to the list of 3 reset-controllers for the wcss sub-system - reference to the list of 2 reset-controllers for the modem - sub-system on SDM845 SoCs - reset-names: Usage: required Value type: - Definition: must be "mss_restart" for the modem sub-system - must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" + Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" for the wcss sub-system - must be "mss_restart", "pdc_reset" for the modem - sub-system on SDM845 SoCs -For devices where the mba and mpss sub-nodes are not specified, mba/mpss region -should be referenced as follows: - memory-region: Usage: required Value type: - Definition: reference to the reserved-memory for the mba region followed - by the mpss region + Definition: reference to wcss reserved-memory region. For the compatible string below the following supplies are required: "qcom,qcs404-wcss-pil" @@ -110,36 +73,6 @@ For the compatible string below the following supplies are required: Definition: reference to the regulators to be held on behalf of the booting of the Hexagon core -For the compatible string below the following supplies are required: - "qcom,msm8996-mss-pil" -- pll-supply: - Usage: required - Value type: - Definition: reference to the regulators to be held on behalf of the - booting of the Hexagon core - -- power-domains: - Usage: required - Value type: - Definition: reference to power-domains that match power-domain-names - -- power-domain-names: - Usage: required - Value type: - Definition: The power-domains needed depend on the compatible string: - qcom,ipq8074-wcss-pil: - no power-domain names required - qcom,msm8996-mss-pil: - qcom,msm8998-mss-pil: - must be "cx", "mx" - qcom,sdm845-mss-pil: - must be "cx", "mx", "mss" - -- qcom,qmp: - Usage: optional - Value type: - Definition: reference to the AOSS side-channel message RAM. - - qcom,smem-states: Usage: required Value type: @@ -155,16 +88,9 @@ For the compatible string below the following supplies are required: Usage: required Value type: Definition: a phandle reference to a syscon representing TCSR followed - by the three offsets within syscon for q6, modem and nc + by the three offsets within syscon for q6, wcss and nc halt registers. -The Hexagon node must contain iommus property as described in ../iommu/iommu.txt -on platforms which do not have TrustZone. - -= SUBNODES: -The Hexagon node must contain two subnodes, named "mba" and "mpss" representing -the memory regions used by the Hexagon firmware. Each sub-node must contain: - - memory-region: Usage: required Value type: @@ -174,56 +100,3 @@ The Hexagon node may also have an subnode named either "smd-edge" or "glink-edge" that describes the communication edge, channels and devices related to the Hexagon. See ../soc/qcom/qcom,smd.yaml and ../soc/qcom/qcom,glink.txt for details on how to describe these. - -= EXAMPLE -The following example describes the resources needed to boot control the -Hexagon, as it is found on MSM8974 boards. - - remoteproc@fc880000 { - compatible = "qcom,msm8974-mss-pil"; - reg = <0xfc880000 0x100>, <0xfc820000 0x020>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "bus", "mem", "xo"; - - resets = <&gcc GCC_MSS_RESTART>; - reset-names = "mss_restart"; - - cx-supply = <&pm8841_s2>; - mss-supply = <&pm8841_s3>; - mx-supply = <&pm8841_s1>; - pll-supply = <&pm8941_l12>; - - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - mba { - memory-region = <&mba_region>; - }; - - mpss { - memory-region = <&mpss_region>; - }; - - smd-edge { - interrupts = ; - - qcom,ipc = <&apcs 8 12>; - qcom,smd-edge = <0>; - - label = "modem"; - }; - }; -- cgit