From 23bf6fc7046c8c694ff774f0532329dd78efe0a2 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 25 Dec 2020 15:52:48 +0800 Subject: dt-bindings: usb: convert usb-device.txt to YAML schema Convert usb-device.txt to YAML schema usb-device.yaml Reviewed-by: Rob Herring Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20201225075258.33352-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/usb-device.txt | 102 --------------------- 1 file changed, 102 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/usb-device.txt (limited to 'Documentation/devicetree/bindings/usb/usb-device.txt') diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt deleted file mode 100644 index 036be172b1ae..000000000000 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ /dev/null @@ -1,102 +0,0 @@ -Generic USB Device Properties - -Usually, we only use device tree for hard wired USB device. -The reference binding doc is from: -http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps - -Four types of device-tree nodes are defined: "host-controller nodes" -representing USB host controllers, "device nodes" representing USB devices, -"interface nodes" representing USB interfaces and "combined nodes" -representing simple USB devices. - -A combined node shall be used instead of a device node and an interface node -for devices of class 0 or 9 (hub) with a single configuration and a single -interface. - -A "hub node" is a combined node or an interface node that represents a USB -hub. - - -Required properties for device nodes: -- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. - The textual representation of VID and PID shall be in lower case hexadecimal - with leading zeroes suppressed. The other compatible strings from the above - standard binding could also be used, but a device adhering to this binding - may leave out all except for "usbVID,PID". -- reg: the number of the USB hub port or the USB host-controller port to which - this device is attached. The range is 1-255. - - -Required properties for device nodes with interface nodes: -- #address-cells: shall be 2 -- #size-cells: shall be 0 - - -Required properties for interface nodes: -- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is - the product id, CN is the configuration value and IN is the interface - number. The textual representation of VID, PID, CN and IN shall be in lower - case hexadecimal with leading zeroes suppressed. The other compatible - strings from the above standard binding could also be used, but a device - adhering to this binding may leave out all except for - "usbifVID,PID.configCN.IN". -- reg: the interface number and configuration value - -The configuration component is not included in the textual representation of -an interface-node unit address for configuration 1. - - -Required properties for combined nodes: -- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. - The textual representation of VID and PID shall be in lower case hexadecimal - with leading zeroes suppressed. The other compatible strings from the above - standard binding could also be used, but a device adhering to this binding - may leave out all except for "usbVID,PID". -- reg: the number of the USB hub port or the USB host-controller port to which - this device is attached. The range is 1-255. - - -Required properties for hub nodes with device nodes: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - - -Required properties for host-controller nodes with device nodes: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - - -Example: - -&usb1 { /* host controller */ - #address-cells = <1>; - #size-cells = <0>; - - hub@1 { /* hub connected to port 1 */ - compatible = "usb5e3,608"; - reg = <1>; - }; - - device@2 { /* device connected to port 2 */ - compatible = "usb123,4567"; - reg = <2>; - }; - - device@3 { /* device connected to port 3 */ - compatible = "usb123,abcd"; - reg = <3>; - - #address-cells = <2>; - #size-cells = <0>; - - interface@0 { /* interface 0 of configuration 1 */ - compatible = "usbif123,abcd.config1.0"; - reg = <0 1>; - }; - - interface@0,2 { /* interface 0 of configuration 2 */ - compatible = "usbif123,abcd.config2.0"; - reg = <0 2>; - }; - }; -}; -- cgit