From f877918cdd793373fb7a960c72ba3639786e8e8f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 9 Nov 2017 18:07:19 +0100 Subject: dt-bindings: usb: document hub and host-controller properties Hub nodes and host-controller nodes with child nodes must specify values for #address-cells (1) and #size-cells (0). Also make the definition of the related reg property a bit more stringent, and add comments to the example source. Signed-off-by: Johan Hovold Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/usb/usb-device.txt | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree/bindings/usb/usb-device.txt') diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index e0b562e35a0c..1b27cebb47f4 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -4,22 +4,34 @@ Usually, we only use device tree for hard wired USB device. The reference binding doc is from: http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps + Required properties: - compatible: "usbVID,PID", where VID is the vendor id and PID the product id. The textual representation of VID and PID shall be in lower case hexadecimal with leading zeroes suppressed. The other compatible strings from the above standard binding could also be used, but a device adhering to this binding may leave out all except for "usbVID,PID". -- reg: the port number which this device is connecting to, the range - is 1-255. +- reg: the number of the USB hub port or the USB host-controller port to which + this device is attached. The range is 1-255. + + +Required properties for hub nodes with device nodes: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + + +Required properties for host-controller nodes with device nodes: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + Example: -&usb1 { +&usb1 { /* host controller */ #address-cells = <1>; #size-cells = <0>; - hub@1 { + hub@1 { /* hub connected to port 1 */ compatible = "usb5e3,608"; reg = <1>; }; -- cgit