From 69bec725985324e79b1c47ea287815ac4ddb0521 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 19 Feb 2016 17:26:15 +0800 Subject: USB: core: let USB device know device node Although most of USB devices are hot-plug's, there are still some devices are hard wired on the board, eg, for HSIC and SSIC interface USB devices. If these kinds of USB devices are multiple functions, and they can supply other interfaces like i2c, gpios for other devices, we may need to describe these at device tree. In this commit, it uses "reg" in dts as physical port number to match the phyiscal port number decided by USB core, if they are the same, then the device node is for the device we are creating for USB core. Signed-off-by: Peter Chen Acked-by: Philipp Zabel Acked-by: Alan Stern Acked-by: Rob Herring Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/usb-device.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/usb-device.txt (limited to 'Documentation/devicetree/bindings/usb') diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt new file mode 100644 index 000000000000..1c35e7b665e1 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -0,0 +1,28 @@ +Generic USB Device Properties + +Usually, we only use device tree for hard wired USB device. +The reference binding doc is from: +http://www.firmware.org/1275/bindings/usb/usb-1_0.ps + +Required properties: +- compatible: usbVID,PID. The textual representation of VID, PID shall + be in lower case hexadecimal with leading zeroes suppressed. The + other compatible strings from the above standard binding could also + be used, but a device adhering to this binding may leave out all except + for usbVID,PID. +- reg: the port number which this device is connecting to, the range + is 1-31. + +Example: + +&usb1 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + hub: genesys@1 { + compatible = "usb5e3,608"; + reg = <1>; + }; +} -- cgit