From 1f9573241080449d221b6f8a9cc68e28fdeb7408 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 11 Aug 2015 13:17:11 -0700 Subject: drm/vc4: Add devicetree bindings for VC4. VC4 is the GPU (display and 3D) subsystem present on the 2835 and some other Broadcom SoCs. This binding follows the model of msm, imx, sti, and others, where there is a subsystem node for the whole GPU, with nodes for the individual HW components within it. v2: Extend the commit message, fix several nits from Stephen Warren. v3: Rename the compatibility strings, clean up node names, drop the unnecessary lists of components. Use compatibility strings for choosing CRTC HVS channel numbers. Document the HDMI clock usage. v4: Whitespace fix, expand acronyms, move to display/ instead of gpu/, rename "hpd-gpio" to "hpd-gpios". Signed-off-by: Eric Anholt --- .../devicetree/bindings/display/brcm,bcm-vc4.txt | 65 ++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt new file mode 100644 index 000000000000..56a961aa5061 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -0,0 +1,65 @@ +Broadcom VC4 (VideoCore4) GPU + +The VC4 device present on the Raspberry Pi includes a display system +with HDMI output and the HVS (Hardware Video Scaler) for compositing +display planes. + +Required properties for VC4: +- compatible: Should be "brcm,bcm2835-vc4" + +Required properties for Pixel Valve: +- compatible: Should be one of "brcm,bcm2835-pixelvalve0", + "brcm,bcm2835-pixelvalve1", or "brcm,bcm2835-pixelvalve2" +- reg: Physical base address and length of the PV's registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt + +Required properties for HVS: +- compatible: Should be "brcm,bcm2835-hvs" +- reg: Physical base address and length of the HVS's registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt + +Required properties for HDMI +- compatible: Should be "brcm,bcm2835-hdmi" +- reg: Physical base address and length of the two register ranges + ("HDMI" and "HD", in that order) +- interrupts: The interrupt numbers + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +- ddc: phandle of the I2C controller used for DDC EDID probing +- clocks: a) hdmi: The HDMI state machine clock + b) pixel: The pixel clock. + +Optional properties for HDMI: +- hpd-gpios: The GPIO pin for HDMI hotplug detect (if it doesn't appear + as an interrupt/status bit in the HDMI controller + itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt + +Example: +pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ +}; + +hvs@7e400000 { + compatible = "brcm,bcm2835-hvs"; + reg = <0x7e400000 0x6000>; + interrupts = <2 1>; +}; + +hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; +}; + +vc4: gpu { + compatible = "brcm,bcm2835-vc4"; +}; -- cgit From f1ceb84ae0fba02dcb5aa0ff56b5546767376795 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 17 Jul 2015 10:44:33 +0300 Subject: drm: rcar-du: Add support for the R8A7793 DU The R8A7793 DU is identical to the R8A7791 and thus only requires a new DT compatible string. Signed-off-by: Laurent Pinchart --- Documentation/devicetree/bindings/video/renesas,du.txt | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt index c902323928f7..d05be121486f 100644 --- a/Documentation/devicetree/bindings/video/renesas,du.txt +++ b/Documentation/devicetree/bindings/video/renesas,du.txt @@ -5,7 +5,8 @@ Required Properties: - compatible: must be one of the following. - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - - "renesas,du-r8a7791" for R8A7791 (R-Car M2) compatible DU + - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU + - "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU - reg: A list of base address and length of each memory resource, one for each entry in the reg-names property. @@ -22,9 +23,9 @@ Required Properties: - clock-names: Name of the clocks. This property is model-dependent. - R8A7779 uses a single functional clock. The clock doesn't need to be named. - - R8A7790 and R8A7791 use one functional clock per channel and one clock - per LVDS encoder. The functional clocks must be named "du.x" with "x" - being the channel numerical index. The LVDS clocks must be named + - R8A779[013] use one functional clock per channel and one clock per LVDS + encoder (if available). The functional clocks must be named "du.x" with + "x" being the channel numerical index. The LVDS clocks must be named "lvds.x" with "x" being the LVDS encoder numerical index. - In addition to the functional and encoder clocks, all DU versions also support externally supplied pixel clocks. Those clocks are optional. @@ -43,7 +44,8 @@ corresponding to each DU output. ----------------------------------------------------------------------------- R8A7779 (H1) DPAD 0 DPAD 1 - R8A7790 (H2) DPAD LVDS 0 LVDS 1 - R8A7791 (M2) DPAD LVDS 0 - + R8A7791 (M2-W) DPAD LVDS 0 - + R8A7793 (M2-N) DPAD LVDS 0 - Example: R8A7790 (R-Car H2) DU -- cgit From 090425c45db3ec438c161f6a5dd05d1824e65dcd Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 17 Jul 2015 10:44:33 +0300 Subject: drm: rcar-du: Add support for the R8A7794 DU The R8A7794 DU has a fixed output routing configuration with one RGB output per CRTC and thus lacks the RGB output routing register field. Signed-off-by: Laurent Pinchart --- Documentation/devicetree/bindings/video/renesas,du.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt index d05be121486f..eccd4f4867b2 100644 --- a/Documentation/devicetree/bindings/video/renesas,du.txt +++ b/Documentation/devicetree/bindings/video/renesas,du.txt @@ -7,6 +7,7 @@ Required Properties: - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU - "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU + - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU - reg: A list of base address and length of each memory resource, one for each entry in the reg-names property. @@ -23,7 +24,7 @@ Required Properties: - clock-names: Name of the clocks. This property is model-dependent. - R8A7779 uses a single functional clock. The clock doesn't need to be named. - - R8A779[013] use one functional clock per channel and one clock per LVDS + - R8A779[0134] use one functional clock per channel and one clock per LVDS encoder (if available). The functional clocks must be named "du.x" with "x" being the channel numerical index. The LVDS clocks must be named "lvds.x" with "x" being the LVDS encoder numerical index. @@ -46,6 +47,7 @@ corresponding to each DU output. R8A7790 (H2) DPAD LVDS 0 LVDS 1 R8A7791 (M2-W) DPAD LVDS 0 - R8A7793 (M2-N) DPAD LVDS 0 - + R8A7794 (E2) DPAD 0 DPAD 1 - Example: R8A7790 (R-Car H2) DU -- cgit From d40325b43750eb4a8a81240e36fe38e9ccbcc9eb Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Tue, 15 Sep 2015 08:41:47 -0400 Subject: drm/msm/mdp5: Avoid printing error messages for optional clocks The current behavior is to try to get optional clocks and print a dev_err message in case of failure. This looks rather confusing and may increase with the amount of optional clocks. We may need a cleaner way to handle per-device clocks but in the meantime, let's reduce the amount of dev_err messages during the probe. Signed-off-by: Stephane Viau Signed-off-by: Rob Clark --- Documentation/devicetree/bindings/drm/msm/mdp.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/drm/msm/mdp.txt b/Documentation/devicetree/bindings/drm/msm/mdp.txt index 1a0598e5279d..0833edaba4c3 100644 --- a/Documentation/devicetree/bindings/drm/msm/mdp.txt +++ b/Documentation/devicetree/bindings/drm/msm/mdp.txt @@ -11,13 +11,14 @@ Required properties: - clock-names: the following clocks are required: * "core_clk" * "iface_clk" - * "lut_clk" * "src_clk" * "hdmi_clk" * "mpd_clk" Optional properties: - gpus: phandle for gpu device +- clock-names: the following clocks are optional: + * "lut_clk" Example: -- cgit From 0afbe59edd3fd3618da67b4835b57ebcc4ac3abd Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Tue, 15 Sep 2015 08:41:49 -0400 Subject: drm/msm/hdmi: Add basic HDMI support for msm8996 The HDMI controller is new in MDP5 v1.7. As of now, this change doesn't reflect the novelty and only adds the basics so the probe gets triggered. Signed-off-by: Stephane Viau Signed-off-by: Rob Clark --- Documentation/devicetree/bindings/drm/msm/hdmi.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/Documentation/devicetree/bindings/drm/msm/hdmi.txt index e926239e1101..379ee2ea9a3d 100644 --- a/Documentation/devicetree/bindings/drm/msm/hdmi.txt +++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt @@ -2,6 +2,7 @@ Qualcomm adreno/snapdragon hdmi output Required properties: - compatible: one of the following + * "qcom,hdmi-tx-8996" * "qcom,hdmi-tx-8994" * "qcom,hdmi-tx-8084" * "qcom,hdmi-tx-8974" @@ -21,6 +22,7 @@ Required properties: Optional properties: - qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin - qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin +- power-domains: reference to the power domain(s), if available. - pinctrl-names: the pin control state names; should contain "default" - pinctrl-0: the default pinctrl state (active) - pinctrl-1: the "sleep" pinctrl state @@ -35,6 +37,7 @@ Example: reg-names = "core_physical"; reg = <0x04a00000 0x1000>; interrupts = ; + power-domains = <&mmcc MDSS_GDSC>; clock-names = "core_clk", "master_iface_clk", -- cgit