From 9ad593bc959f9aea22df151c323eb0ed9a65c98f Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 9 Apr 2019 04:59:49 +0000 Subject: dt-bindings: fsl: scu: add general interrupt support Add scu general interrupt function support. Signed-off-by: Anson Huang Reviewed-by: Rob Herring Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- .../devicetree/bindings/arm/freescale/fsl,scu.txt | 29 +++++++++++++++++----- 1 file changed, 23 insertions(+), 6 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 72d481c8dd48..5d7dbabbb784 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -22,9 +22,11 @@ Required properties: ------------------- - compatible: should be "fsl,imx-scu". - mbox-names: should include "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3". -- mboxes: List of phandle of 4 MU channels for tx and 4 MU channels - for rx. All 8 MU channels must be in the same MU instance. + "rx0", "rx1", "rx2", "rx3"; + include "gip3" if want to support general MU interrupt. +- mboxes: List of phandle of 4 MU channels for tx, 4 MU channels for + rx, and 1 optional MU channel for general interrupt. + All MU channels must be in the same MU instance. Cross instances are not allowed. The MU instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need to make sure use the one which is not conflict with other @@ -34,6 +36,7 @@ Required properties: Channel 1 must be "tx1" or "rx1". Channel 2 must be "tx2" or "rx2". Channel 3 must be "tx3" or "rx3". + General interrupt rx channel must be "gip3". e.g. mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 @@ -42,10 +45,18 @@ Required properties: &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 - &lsio_mu1 1 3>; + &lsio_mu1 1 3 + &lsio_mu1 3 3>; See Documentation/devicetree/bindings/mailbox/fsl,mu.txt for detailed mailbox binding. +Note: Each mu which supports general interrupt should have an alias correctly +numbered in "aliases" node. +e.g. +aliases { + mu1 = &lsio_mu1; +}; + i.MX SCU Client Device Node: ============================================================ @@ -124,6 +135,10 @@ Required properties: Example (imx8qxp): ------------- +aliases { + mu1 = &lsio_mu1; +}; + lsio_mu1: mailbox@5d1c0000 { ... #mbox-cells = <2>; @@ -133,7 +148,8 @@ firmware { scu { compatible = "fsl,imx-scu"; mbox-names = "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3"; + "rx0", "rx1", "rx2", "rx3", + "gip3"; mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 @@ -141,7 +157,8 @@ firmware { &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 - &lsio_mu1 1 3>; + &lsio_mu1 1 3 + &lsio_mu1 3 3>; clk: clk { compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; -- cgit