From 4dd964df36d0e548e1806ec2ec275b62d4dc46e8 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 17 Jul 2014 14:30:40 +0530 Subject: PCI: designware: Look for configuration space in 'reg', not 'ranges' The configuration address space has so far been specified in *ranges*, however it should be specified in *reg* making it a platform MEM resource. Hence used 'platform_get_resource_*' API to get configuration address space in the designware driver. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Bjorn Helgaas Acked-by: Mohit Kumar Acked-by: Jingoo Han Cc: Jason Gunthorpe Cc: Marek Vasut Cc: Arnd Bergmann --- Documentation/devicetree/bindings/pci/designware-pcie.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index d0d15ee42834..ed0d9b9fff2b 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -2,6 +2,10 @@ Required properties: - compatible: should contain "snps,dw-pcie" to identify the core. +- reg: Should contain the configuration address space. +- reg-names: Must be "config" for the PCIe configuration space. + (The old way of getting the configuration address space from "ranges" + is deprecated and should be avoided.) - #address-cells: set to <3> - #size-cells: set to <2> - device_type: set to "pci" -- cgit From 47ff3de911a728cdf9ecc6ad777131902cff62b4 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Tue, 22 Jul 2014 15:23:45 -0600 Subject: PCI: dra7xx: Add TI DRA7xx PCIe driver Add support for PCIe controller in DRA7xx. This driver re-uses the designware core code that is already present in kernel. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Bjorn Helgaas Acked-by: Jingoo Han Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Jason Gunthorpe Cc: Mohit Kumar Cc: Marek Vasut Cc: Arnd Bergmann --- Documentation/devicetree/bindings/pci/ti-pci.txt | 59 ++++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt new file mode 100644 index 000000000000..3d217911b313 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -0,0 +1,59 @@ +TI PCI Controllers + +PCIe Designware Controller + - compatible: Should be "ti,dra7-pcie"" + - reg : Two register ranges as listed in the reg-names property + - reg-names : The first entry must be "ti-conf" for the TI specific registers + The second entry must be "rc-dbics" for the designware pcie + registers + The third entry must be "config" for the PCIe configuration space + - phys : list of PHY specifiers (used by generic PHY framework) + - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the + number of PHYs as specified in *phys* property. + - ti,hwmods : Name of the hwmod associated to the pcie, "pcie", + where is the instance number of the pcie from the HW spec. + - interrupts : Two interrupt entries must be specified. The first one is for + main interrupt line and the second for MSI interrupt line. + - #address-cells, + #size-cells, + #interrupt-cells, + device_type, + ranges, + num-lanes, + interrupt-map-mask, + interrupt-map : as specified in ../designware-pcie.txt + +Example: +axi { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0x51000000 0x51000000 0x3000 + 0x0 0x20000000 0x10000000>; + pcie@51000000 { + compatible = "ti,dra7-pcie"; + reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; + reg-names = "rc_dbics", "ti_conf", "config"; + interrupts = <0 232 0x4>, <0 233 0x4>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + #interrupt-cells = <1>; + num-lanes = <1>; + ti,hwmods = "pcie1"; + phys = <&pcie1_phy>; + phy-names = "pcie-phy0"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 1>, + <0 0 0 2 &pcie_intc 2>, + <0 0 0 3 &pcie_intc 3>, + <0 0 0 4 &pcie_intc 4>; + pcie_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; +}; -- cgit