From 8c78f0dee4371ab3b0422edf08597525c6219512 Mon Sep 17 00:00:00 2001 From: "Johannes Cornelis Draaijer (datdenkikniet)" Date: Thu, 7 Jan 2021 20:40:14 +0100 Subject: hwmon: Add AHT10 Temperature and Humidity Sensor Driver This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck --- Documentation/hwmon/aht10.rst | 46 +++++++++++++++++++++++++++++++++++++++++++ Documentation/hwmon/index.rst | 1 + 2 files changed, 47 insertions(+) create mode 100644 Documentation/hwmon/aht10.rst (limited to 'Documentation/hwmon') diff --git a/Documentation/hwmon/aht10.rst b/Documentation/hwmon/aht10.rst new file mode 100644 index 000000000000..482262ca117c --- /dev/null +++ b/Documentation/hwmon/aht10.rst @@ -0,0 +1,46 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver aht10 +===================== + +Supported chips: + + * Aosong AHT10 + + Prefix: 'aht10' + + Addresses scanned: None + + Datasheet: + + Chinese: http://www.aosong.com/userfiles/files/media/AHT10%E4%BA%A7%E5%93%81%E6%89%8B%E5%86%8C%20A3%2020201210.pdf + English: https://server4.eca.ir/eshop/AHT10/Aosong_AHT10_en_draft_0c.pdf + +Author: Johannes Cornelis Draaijer + + +Description +----------- + +The AHT10 is a Temperature and Humidity sensor + +The address of this i2c device may only be 0x38 + +Usage Notes +----------- + +This driver does not probe for AHT10 devices, as there is no reliable +way to determine if an i2c chip is or isn't an AHT10. The device has +to be instantiated explicitly with the address 0x38. See +Documentation/i2c/instantiating-devices.rst for details. + +Sysfs entries +------------- + +=============== ============================================ +temp1_input Measured temperature in millidegrees Celcius +humidity1_input Measured humidity in %H +update_interval The minimum interval for polling the sensor, + in milliseconds. Writable. Must be at + least 2000. +=============== ============================================ diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index ebe53bb771dd..3589151bcefb 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -37,6 +37,7 @@ Hardware Monitoring Kernel Drivers adt7462 adt7470 adt7475 + aht10 amc6821 amd_energy asb100 -- cgit