From 45bced87e79316ecd868aee8f187284025792c5f Mon Sep 17 00:00:00 2001 From: Stanislav Nijnikov Date: Thu, 15 Feb 2018 14:14:02 +0200 Subject: scsi: ufs: sysfs: device descriptor This patch introduces a sysfs group entry for the UFS device descriptor parameters. The group adds "device_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: Stanislav Nijnikov Reviewed-by: Greg Kroah-Hartman Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 223 +++++++++++++++++++++++++++++ 1 file changed, 223 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-ufs (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs new file mode 100644 index 000000000000..8da7b8448f13 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -0,0 +1,223 @@ +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the device type. This is one of the UFS + device descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the device class. This is one of the UFS + device descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the UFS storage subclass. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the protocol supported by an UFS device. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows number of logical units. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows number of well known logical units. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows value that indicates whether the device is + enabled for boot. This is one of the UFS device descriptor + parameters. The full information about the descriptor could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows value that indicates whether the device + descriptor could be read after partial initialization phase + of the boot sequence. This is one of the UFS device descriptor + parameters. The full information about the descriptor could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows value that defines the power mode after + device initialization or hardware reset. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the high priority lun. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the secure removal type. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows whether the security lun is supported. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the background operations termination + latency. This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the initial active ICC level. This is one + of the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the specification version. This is one + of the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the manufacturing date in BCD format. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the manufacturee ID. This is one of the + UFS device descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the maximum number of outstanding RTTs + supported by the device. This is one of the UFS device + descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the frequency and method of the realtime + clock update. This is one of the UFS device descriptor + parameters. The full information about the descriptor + could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows which features are supported by the device. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be + found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the FFU timeout. This is one of the + UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the device queue depth. This is one of the + UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the device version. This is one of the + UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows number of secure write protect areas + supported by the device. This is one of the UFS device + descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the maximum amount of data that may be + written during the pre-soldering phase of the PSA flow. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the command maximum timeout for a change + in PSA state. This is one of the UFS device descriptor + parameters. The full information about the descriptor could + be found at UFS specifications 2.1. + The file is read only. -- cgit From 8c2582bfbd9abe84b9cf435996aa720a84f908c4 Mon Sep 17 00:00:00 2001 From: Stanislav Nijnikov Date: Thu, 15 Feb 2018 14:14:03 +0200 Subject: scsi: ufs: sysfs: interconnect descriptor This patch introduces a sysfs group entry for the UFS interconnect descriptor parameters. The group adds "interconnect_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: Stanislav Nijnikov Reviewed-by: Greg Kroah-Hartman Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 8da7b8448f13..099e6fa0e301 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -221,3 +221,22 @@ Description: This file shows the command maximum timeout for a change parameters. The full information about the descriptor could be found at UFS specifications 2.1. The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the MIPI UniPro version number in BCD format. + This is one of the UFS interconnect descriptor parameters. + The full information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the MIPI M-PHY version number in BCD format. + This is one of the UFS interconnect descriptor parameters. + The full information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. -- cgit From c720c091222e26d46c0fd9c70144a0f916bf3993 Mon Sep 17 00:00:00 2001 From: Stanislav Nijnikov Date: Thu, 15 Feb 2018 14:14:04 +0200 Subject: scsi: ufs: sysfs: geometry descriptor This patch introduces a sysfs group entry for the UFS geometry descriptor parameters. The group adds "geometry_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: Stanislav Nijnikov Reviewed-by: Greg Kroah-Hartman Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 173 +++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 099e6fa0e301..6ea7613a3f3e 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -240,3 +240,176 @@ Description: This file shows the MIPI M-PHY version number in BCD format. The full information about the descriptor could be found at UFS specifications 2.1. The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/raw_device_capacity +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the total memory quantity available to + the user to configure the device logical units. This is one + of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the maximum number of logical units + supported by the UFS device. This is one of the UFS + geometry descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the segment size. This is one of the UFS + geometry descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the allocation unit size. This is one of + the UFS geometry descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the minimum addressable block size. This + is one of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at UFS + specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the optimal read block size. This is one + of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at UFS + specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the optimal write block size. This is one + of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at UFS + specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the maximum data-in buffer size. This + is one of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at UFS + specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the maximum data-out buffer size. This + is one of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at UFS + specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the maximum number of RPMB frames allowed + in Security Protocol In/Out. This is one of the UFS geometry + descriptor parameters. The full information about the + descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the dynamic capacity resource policy. This + is one of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows support for out-of-order data transfer. + This is one of the UFS geometry descriptor parameters. + The full information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows maximum available number of contexts which + are supported by the device. This is one of the UFS geometry + descriptor parameters. The full information about the + descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows system data tag unit size. This is one of + the UFS geometry descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows maximum storage area size allocated by + the device to handle system data by the tagging mechanism. + This is one of the UFS geometry descriptor parameters. + The full information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows supported secure removal types. This is + one of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows supported memory types. This is one of + the UFS geometry descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the maximum number of allocation units for + different memory types (system code, non persistent, + enhanced type 1-4). This is one of the UFS geometry + descriptor parameters. The full information about the + descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the memory capacity adjustment factor for + different memory types (system code, non persistent, + enhanced type 1-4). This is one of the UFS geometry + descriptor parameters. The full information about the + descriptor could be found at UFS specifications 2.1. + The file is read only. -- cgit From c648c2d27f168ae4faeb43f8c3074226aae3862c Mon Sep 17 00:00:00 2001 From: Stanislav Nijnikov Date: Thu, 15 Feb 2018 14:14:05 +0200 Subject: scsi: ufs: sysfs: health descriptor This patch introduces a sysfs group entry for the UFS health descriptor parameters. The group adds "health_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: Stanislav Nijnikov Reviewed-by: Greg Kroah-Hartman Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 6ea7613a3f3e..ddb012b05f0d 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -413,3 +413,31 @@ Description: This file shows the memory capacity adjustment factor for descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/eol_info +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows preend of life information. This is one + of the UFS health descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows indication of the device life time + (method a). This is one of the UFS health descriptor + parameters. The full information about the descriptor + could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows indication of the device life time + (method b). This is one of the UFS health descriptor + parameters. The full information about the descriptor + could be found at UFS specifications 2.1. + The file is read only. -- cgit From c2e6e283c52f3a2c4a99774b36bcc88e7cbd5eb7 Mon Sep 17 00:00:00 2001 From: Stanislav Nijnikov Date: Thu, 15 Feb 2018 14:14:06 +0200 Subject: scsi: ufs: sysfs: power descriptor This patch introduces a sysfs group entry for the UFS power descriptor parameters. The group adds "power_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: Stanislav Nijnikov Reviewed-by: Greg Kroah-Hartman Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index ddb012b05f0d..7460566f557d 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -441,3 +441,13 @@ Description: This file shows indication of the device life time parameters. The full information about the descriptor could be found at UFS specifications 2.1. The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/power_descriptor/active_icc_levels_vcc* +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows maximum VCC, VCCQ and VCCQ2 value for + active ICC levels from 0 to 15. This is one of the UFS + power descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. -- cgit From 2238d31cdeabc585de5869efd11856815aa4dd13 Mon Sep 17 00:00:00 2001 From: Stanislav Nijnikov Date: Thu, 15 Feb 2018 14:14:07 +0200 Subject: scsi: ufs: sysfs: string descriptors This patch introduces a sysfs group entry for the UFS string descriptors. The group adds "string_descriptors" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The folder will contain 5 files that will show string values defined by the UFS spec: a manufacturer name, a product name, an OEM id, a serial number and a product revision. The full information about the string descriptors could be found at UFS specifications 2.1. Signed-off-by: Stanislav Nijnikov Reviewed-by: Greg Kroah-Hartman Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 39 ++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 7460566f557d..c17a9685048b 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -451,3 +451,42 @@ Description: This file shows maximum VCC, VCCQ and VCCQ2 value for power descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/manufacturer_name +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file contains a device manufactureer name string. + The full information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file contains a product name string. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file contains a OEM ID string. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file contains a device serial number string. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file contains a product revision string. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. -- cgit From d829fc8a1058851f1058b4a29ea02da125c1684a Mon Sep 17 00:00:00 2001 From: Stanislav Nijnikov Date: Thu, 15 Feb 2018 14:14:09 +0200 Subject: scsi: ufs: sysfs: unit descriptor This patch introduces a sysfs group entry for the UFS unit descriptor parameters. The group adds "unit_descriptor" folder under the corresponding SCSI device sysfs entry (/sys/class/scsi_device/*/device/). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: Stanislav Nijnikov Reviewed-by: Greg Kroah-Hartman Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 108 +++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index c17a9685048b..57c6a9028108 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -490,3 +490,111 @@ Description: This file contains a product revision string. The full information about the descriptor could be found at UFS specifications 2.1. The file is read only. + + +What: /sys/class/scsi_device/*/device/unit_descriptor/boot_lun_id +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows boot LUN information. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows LUN write protection status. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows LUN queue depth. This is one of the UFS + unit descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows PSA sensitivity. This is one of the UFS + unit descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows LUN memory type. This is one of the UFS + unit descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file defines the device behavior when a power failure + occurs during a write operation. This is one of the UFS + unit descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the size of addressable logical blocks + (calculated as an exponent with base 2). This is one of + the UFS unit descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows total number of addressable logical blocks. + This is one of the UFS unit descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the erase block size. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the thin provisioning type. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the total physical memory resources. This is + one of the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the context capabilities. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the granularity of the LUN. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. -- cgit From d10b2a8ea8fd0d6c8a667dc1950c8c061bfbbcdd Mon Sep 17 00:00:00 2001 From: Stanislav Nijnikov Date: Thu, 15 Feb 2018 14:14:10 +0200 Subject: scsi: ufs: sysfs: flags This patch introduces a sysfs group entry for the UFS flags. The group adds "flags" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The flags are shown as boolean value ("true" or "false"). The full information about the UFS flags could be found at UFS specifications 2.1. Signed-off-by: Stanislav Nijnikov Reviewed-by: Greg Kroah-Hartman Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 65 ++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 57c6a9028108..f4f49e29e225 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -598,3 +598,68 @@ Description: This file shows the granularity of the LUN. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/flags/device_init +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the device init status. The full information + about the flag could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows whether permanent write protection is enabled. + The full information about the flag could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows whether write protection is enabled on all + logical units configured as power on write protected. The + full information about the flag could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows whether the device background operations are + enabled. The full information about the flag could be + found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows whether the device life span mode is enabled. + The full information about the flag could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows whether physical resource removal is enable. + The full information about the flag could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows whether the device is executing internal + operation related to real time clock. The full information + about the flag could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows whether the device FW update is permanently + disabled. The full information about the flag could be found + at UFS specifications 2.1. + The file is read only. -- cgit From ec92b59cc03c3d5757449c1c9344524e088df2bd Mon Sep 17 00:00:00 2001 From: Stanislav Nijnikov Date: Thu, 15 Feb 2018 14:14:11 +0200 Subject: scsi: ufs: sysfs: attributes This patch introduces a sysfs group entry for the UFS attributes. The group adds "attributes" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The attributes are shown as hexadecimal numbers. The full information about the attributes could be found at UFS specifications 2.1. Signed-off-by: Stanislav Nijnikov Reviewed-by: Greg Kroah-Hartman Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 139 +++++++++++++++++++++++++++++ 1 file changed, 139 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index f4f49e29e225..07f1c2f8dbfc 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -663,3 +663,142 @@ Description: This file shows whether the device FW update is permanently disabled. The full information about the flag could be found at UFS specifications 2.1. The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the boot lun enabled UFS device attribute. + The full information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the current power mode UFS device attribute. + The full information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the active icc level UFS device attribute. + The full information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the out of order data transfer enabled UFS + device attribute. The full information about the attribute + could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the background operations status UFS device + attribute. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the purge operation status UFS device + attribute. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the maximum data size in a DATA IN + UPIU. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the maximum number of bytes that can be + requested with a READY TO TRANSFER UPIU. The full information + about the attribute could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the reference clock frequency UFS device + attribute. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows whether the configuration descriptor is locked. + The full information about the attribute could be found at + UFS specifications 2.1. The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the maximum current number of + outstanding RTTs in device that is allowed. The full + information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the exception event control UFS device + attribute. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the exception event status UFS device + attribute. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file provides the ffu status UFS device attribute. + The full information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file show the PSA feature status. The full information + about the attribute could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the amount of data that the host plans to + load to all logical units in pre-soldering state. + The full information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + + +What: /sys/class/scsi_device/*/device/dyn_cap_needed +Date: February 2018 +Contact: Stanislav Nijnikov +Description: This file shows the The amount of physical memory needed + to be removed from the physical memory resources pool of + the particular logical unit. The full information about + the attribute could be found at UFS specifications 2.1. + The file is read only. -- cgit From 18d595bf9de99a0f092d8522da42df8b09ef5c2f Mon Sep 17 00:00:00 2001 From: Weiping Zhang Date: Mon, 26 Feb 2018 22:08:28 +0800 Subject: scsi: sd: Documentation: add sd-parameters.txt Add a file for documenting SCSI sd module parameters and describe the cache_type setting. [mkp: tweaked text a bit] Signed-off-by: Weiping Zhang Signed-off-by: Martin K. Petersen --- Documentation/scsi/sd-parameters.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/scsi/sd-parameters.txt (limited to 'Documentation') diff --git a/Documentation/scsi/sd-parameters.txt b/Documentation/scsi/sd-parameters.txt new file mode 100644 index 000000000000..8e5af00d88e7 --- /dev/null +++ b/Documentation/scsi/sd-parameters.txt @@ -0,0 +1,22 @@ +Linux SCSI Disk Driver (sd) Parameters +====================================== + +cache_type (RW) +--------------- +Enable/disable drive write & read cache. + + cache_type string | WCE RCD | Write cache | Read cache +----------------------------+---------+-------------+------------ + write through | 0 0 | off | on + none | 0 1 | off | off + write back | 1 0 | on | on + write back, no read (daft) | 1 1 | on | off + +To set cache type to "write back" and save this setting to the drive: + + # echo "write back" > cache_type + +To modify the caching mode without making the change persistent, prepend +"temporary " to the cache type string. E.g.: + + # echo "temporary write back" > cache_type -- cgit From 4c40db995eb54c3ee8cb5a8340640f49395d5f9e Mon Sep 17 00:00:00 2001 From: Xiaofei Tan Date: Wed, 7 Mar 2018 20:25:05 +0800 Subject: scsi: hisi_sas: dt-bindings: add an property of signal attenuation For some new boards with hip07 chipset we are required to set PHY config registers differently. The hw property which determines how to set these registers is in the PHY signal attenuation readings. This patch add an devicetree property, "hisilicon,signal-attenuation", which is used to describe the signal attenuation of an board. Cc: Rob Herring Cc: Mark Rutland Signed-off-by: Xiaofei Tan Signed-off-by: John Garry Reviewed-by: Rob Herring Signed-off-by: Martin K. Petersen --- Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt index df3bef7998fa..8c6659ed2cfc 100644 --- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt @@ -53,6 +53,13 @@ Main node required properties: Optional main node properties: - hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the "am-max-transmissions" limitation. + - hisilicon,signal-attenuation : array of 3 32-bit values, containing de-emphasis, + preshoot, and boost attenuation readings for the board. They + are used to describe the signal attenuation of the board. These + values' range is 7600 to 12400, and used to represent -24dB to + 24dB. + The formula is "y = (x-10000)/10000". For example, 10478 + means 4.78dB. Example: sas0: sas@c1000000 { -- cgit From 6b1745caa14ae0afccf1c6ee4c814fd8d5df3dcd Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 13 Mar 2018 15:06:22 -0400 Subject: scsi: eata: eata-pio: Deprecate legacy EATA drivers These two drivers do not appear to be in active use. Deprecate them. Suggested-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- Documentation/scsi/scsi-parameters.txt | 2 -- 1 file changed, 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 453d4b79c78d..8f7be8a05642 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -34,8 +34,6 @@ parameters may be changed at runtime by the command See drivers/scsi/BusLogic.c, comment before function BusLogic_ParseDriverOptions(). - eata= [HW,SCSI] - fdomain= [HW,SCSI] See header of drivers/scsi/fdomain.c. -- cgit From 50041071b5716eb1585c68a482989ab9fc885968 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 14 Mar 2018 12:48:34 +0100 Subject: scsi: documentation: remove ChangeLog.1992-1997 This 20+ year old changelog has no useful information for kernel development or users, so remove it. Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- Documentation/scsi/ChangeLog.1992-1997 | 2023 -------------------------------- 1 file changed, 2023 deletions(-) delete mode 100644 Documentation/scsi/ChangeLog.1992-1997 (limited to 'Documentation') diff --git a/Documentation/scsi/ChangeLog.1992-1997 b/Documentation/scsi/ChangeLog.1992-1997 deleted file mode 100644 index 6faad7e6417c..000000000000 --- a/Documentation/scsi/ChangeLog.1992-1997 +++ /dev/null @@ -1,2023 +0,0 @@ -Sat Jan 18 15:51:45 1997 Richard Henderson - - * Don't play with usage_count directly, instead hand around - the module header and use the module macros. - -Fri May 17 00:00:00 1996 Leonard N. Zubkoff - - * BusLogic Driver Version 2.0.3 Released. - -Tue Apr 16 21:00:00 1996 Leonard N. Zubkoff - - * BusLogic Driver Version 1.3.2 Released. - -Sun Dec 31 23:26:00 1995 Leonard N. Zubkoff - - * BusLogic Driver Version 1.3.1 Released. - -Fri Nov 10 15:29:49 1995 Leonard N. Zubkoff - - * Released new BusLogic driver. - -Wed Aug 9 22:37:04 1995 Andries Brouwer - - As a preparation for new device code, separated the various - functions the request->dev field had into the device proper, - request->rq_dev and a status field request->rq_status. - - The 2nd argument of bios_param is now a kdev_t. - -Wed Jul 19 10:43:15 1995 Michael Neuffer - - * scsi.c (scsi_proc_info): /proc/scsi/scsi now also lists all - attached devices. - - * scsi_proc.c (proc_print_scsidevice): Added. Used by scsi.c and - eata_dma_proc.c to produce some device info for /proc/scsi. - - * eata_dma.c (eata_queue)(eata_int_handler)(eata_scsi_done): - Changed handling of internal SCSI commands send to the HBA. - - -Wed Jul 19 10:09:17 1995 Michael Neuffer - - * Linux 1.3.11 released. - - * eata_dma.c (eata_queue)(eata_int_handler): Added code to do - command latency measurements if requested by root through - /proc/scsi interface. - Throughout Use HZ constant for time references. - - * eata_pio.c: Use HZ constant for time references. - - * aic7xxx.c, aic7xxx.h, aic7xxx_asm.c: Changed copyright from BSD - to GNU style. - - * scsi.h: Added READ_12 command opcode constant - -Wed Jul 19 09:25:30 1995 Michael Neuffer - - * Linux 1.3.10 released. - - * scsi_proc.c (dispatch_scsi_info): Removed unused variable. - -Wed Jul 19 09:25:30 1995 Michael Neuffer - - * Linux 1.3.9 released. - - * scsi.c Blacklist concept expanded to 'support' more device - deficiencies. blacklist[] renamed to device_list[] - (scan_scsis): Code cleanup. - - * scsi_debug.c (scsi_debug_proc_info): Added support to control - device lockup simulation via /proc/scsi interface. - - -Wed Jul 19 09:22:34 1995 Michael Neuffer - - * Linux 1.3.7 released. - - * scsi_proc.c: Fixed a number of bugs in directory handling - -Wed Jul 19 09:18:28 1995 Michael Neuffer - - * Linux 1.3.5 released. - - * Native wide, multichannel and /proc/scsi support now in official - kernel distribution. - - * scsi.c/h, hosts.c/h et al reindented to increase readability - (especially on 80 column wide terminals). - - * scsi.c, scsi_proc.c, ../../fs/proc/inode.c: Added - /proc/scsi/scsi which allows root to scan for hotplugged devices. - - * scsi.c (scsi_proc_info): Added, to support /proc/scsi/scsi. - (scan_scsis): Added some 'spaghetti' code to allow scanning for - single devices. - - -Thu Jun 20 15:20:27 1995 Michael Neuffer - - * proc.c: Renamed to scsi_proc.c - -Mon Jun 12 20:32:45 1995 Michael Neuffer - - * Linux 1.3.0 released. - -Mon May 15 19:33:14 1995 Michael Neuffer - - * scsi.c: Added native multichannel and wide scsi support. - - * proc.c (dispatch_scsi_info) (build_proc_dir_hba_entries): - Updated /proc/scsi interface. - -Thu May 4 17:58:48 1995 Michael Neuffer - - * sd.c (requeue_sd_request): Zero out the scatterlist only if - scsi_malloc returned memory for it. - - * eata_dma.c (register_HBA) (eata_queue): Add support for - large scatter/gather tables and set use_clustering accordingly - - * hosts.c: Make use_clustering changeable in the Scsi_Host structure. - -Wed Apr 12 15:25:52 1995 Eric Youngdale (eric@andante) - - * Linux 1.2.5 released. - - * buslogic.c: Update to version 1.15 (From Leonard N. Zubkoff). - Fixed interrupt routine to avoid races when handling multiple - complete commands per interrupt. Seems to come up with faster - cards. - - * eata_dma.c: Update to 2.3.5r. Modularize. Improved error handling - throughout and fixed bug interrupt routine which resulted in shifted - status bytes. Added blink LED state checks for ISA and EISA HBAs. - Memory management bug seems to have disappeared ==> increasing - C_P_L_CURRENT_MAX to 16 for now. Decreasing C_P_L_DIV to 3 for - performance reasons. - - * scsi.c: If we get a FMK, EOM, or ILI when attempting to scan - the bus, assume that it was just noise on the bus, and ignore - the device. - - * scsi.h: Update and add a bunch of missing commands which we - were never using. - - * sd.c: Use restore_flags in do_sd_request - this may result in - latency conditions, but it gets rid of races and crashes. - Do not save flags again when searching for a second command to - queue. - - * st.c: Use bytes, not STP->buffer->buffer_size when reading - from tape. - - -Tue Apr 4 09:42:08 1995 Eric Youngdale (eric@andante) - - * Linux 1.2.4 released. - - * st.c: Fix typo - restoring wrong flags. - -Wed Mar 29 06:55:12 1995 Eric Youngdale (eric@andante) - - * Linux 1.2.3 released. - - * st.c: Perform some waiting operations with interrupts off. - Is this correct??? - -Wed Mar 22 10:34:26 1995 Eric Youngdale (eric@andante) - - * Linux 1.2.2 released. - - * aha152x.c: Modularize. Add support for PCMCIA. - - * eata.c: Update to version 2.0. Fixed bug preventing media - detection. If scsi_register_host returns NULL, fail gracefully. - - * scsi.c: Detect as NEC (for photo-cd purposes) for the 84 - and 25 models as "NEC_OLDCDR". - - * scsi.h: Add define for NEC_OLDCDR - - * sr.c: Add handling for NEC_OLDCDR. Treat as unknown. - - * u14-34f.c: Update to version 2.0. Fixed same bug as in - eata.c. - - -Mon Mar 6 11:11:20 1995 Eric Youngdale (eric@andante) - - * Linux 1.2.0 released. Yeah!!! - - * Minor spelling/punctuation changes throughout. Nothing - substantive. - -Mon Feb 20 21:33:03 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.95 released. - - * qlogic.c: Update to version 0.41. - - * seagate.c: Change some message to be more descriptive about what - we detected. - - * sr.c: spelling/whitespace changes. - -Mon Feb 20 21:33:03 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.94 released. - -Mon Feb 20 08:57:17 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.93 released. - - * hosts.h: Change io_port to long int from short. - - * 53c7,8xx.c: crash on AEN fixed, SCSI reset is no longer a NOP, - NULL pointer panic on odd UDCs fixed, two bugs in diagnostic output - fixed, should initialize correctly if left running, now loadable, - new memory allocation, extraneous diagnostic output suppressed, - splx() replaced with save/restore flags. [ Drew ] - - * hosts.c, hosts.h, scsi_ioctl.c, sd.c, sd_ioctl.c, sg.c, sr.c, - sr_ioctl.c: Add special junk at end that Emacs will use for - formatting the file. - - * qlogic.c: Update to v0.40a. Improve parity handling. - - * scsi.c: Add Hitachi DK312C to blacklist. Change "};" to "}" in - many places. Use scsi_init_malloc to get command block - may - need this to be dma compatible for some host adapters. - Restore interrupts after unregistering a host. - - * sd.c: Use sti instead of restore flags - causes latency problems. - - * seagate.c: Use controller_type to determine string used when - registering irq. - - * sr.c: More photo-cd hacks to make sure we get the xa stuff right. - * sr.h, sr.c: Change is_xa to xa_flags field. - - * st.c: Disable retries for write operations. - -Wed Feb 15 10:52:56 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.92 released. - - * eata.c: Update to 1.17. - - * eata_dma.c: Update to 2.31a. Add more support for /proc/scsi. - Continuing modularization. Less crashes because of the bug in the - memory management ==> increase C_P_L_CURRENT_MAX to 10 - and decrease C_P_L_DIV to 4. - - * hosts.c: If we remove last host registered, reuse host number. - When freeing memory from host being deregistered, free extra_bytes - too. - - * scsi.c (scan_scsis): memset(SDpnt, 0) and set SCmd.device to SDpnt. - Change memory allocation to work around bugs in __get_dma_pages. - Do not free host if usage count is not zero (for modules). - - * sr_ioctl.c: Increase IOCTL_TIMEOUT to 3000. - - * st.c: Allow for ST_EXTRA_DEVS in st data structures. - - * u14-34f.c: Update to 1.17. - -Thu Feb 9 10:11:16 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.91 released. - - * eata.c: Update to 1.16. Use wish_block instead of host->block. - - * hosts.c: Initialize wish_block to 0. - - * hosts.h: Add wish_block. - - * scsi.c: Use wish_block as indicator that the host should be added - to block list. - - * sg.c: Add SG_EXTRA_DEVS to number of slots. - - * u14-34f.c: Use wish_block. - -Tue Feb 7 11:46:04 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.90 released. - - * eata.c: Change naming from eata_* to eata2x_*. Now at vers 1.15. - Update interrupt handler to take pt_regs as arg. Allow blocking - even if loaded as module. Initialize target_time_out array. - Do not put sti(); in timing loop. - - * hosts.c: Do not reuse host numbers. - Use scsi_make_blocked_list to generate blocking list. - - * script_asm.pl: Beats me. Don't know perl. Something to do with - phase index. - - * scsi.c (scsi_make_blocked_list): New function - code copied from - hosts.c. - - * scsi.c: Update code to disable photo CD for Toshiba cdroms. - Use just manufacturer name, not model number. - - * sr.c: Fix setting density for Toshiba drives. - - * u14-34f.c: Clear target_time_out array during reset. - -Wed Feb 1 09:20:45 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.89 released. - - * Makefile, u14-34f.c: Modularize. - - * Makefile, eata.c: Modularize. Now version 1.14 - - * NCR5380.c: Update interrupt handler with new arglist. Minor - cleanups. - - * eata_dma.c: Begin to modularize. Add hooks for /proc/scsi. - New version 2.3.0a. Add code in interrupt handler to allow - certain CDROM drivers to be detected which return a - CHECK_CONDITION during SCSI bus scan. Add opcode check to get - all DATA IN and DATA OUT phases right. Utilize HBA_interpret flag. - Improvements in HBA identification. Various other minor stuff. - - * hosts.c: Initialize ->dma_channel and ->io_port when registering - a new host. - - * qlogic.c: Modularize and add PCMCIA support. - - * scsi.c: Add Hitachi to blacklist. - - * scsi.c: Change default to no lun scan (too many problem devices). - - * scsi.h: Define QUEUE_FULL condition. - - * sd.c: Do not check for non-existent partition until after - new media check. - - * sg.c: Undo previous change which was wrong. - - * sr_ioctl.c: Increase IOCTL_TIMEOUT to 2000. - - * st.c: Patches from Kai - improve filemark handling. - -Tue Jan 31 17:32:12 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.88 released. - - * Throughout - spelling/grammar fixups. - - * scsi.c: Make sure that all buffers are 16 byte aligned - some - drivers (buslogic) need this. - - * scsi.c (scan_scsis): Remove message printed. - - * scsi.c (scsi_init): Move message here. - -Mon Jan 30 06:40:25 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.87 released. - - * sr.c: Photo-cd related changes. (Gerd Knorr??). - - * st.c: Changes from Kai related to EOM detection. - -Mon Jan 23 23:53:10 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.86 released. - - * 53c7,8xx.h: Change SG size to 127. - - * eata_dma: Update to version 2.10i. Remove bug in the registration - of multiple HBAs and channels. Minor other improvements and stylistic - changes. - - * scsi.c: Test for Toshiba XM-3401TA and exclude from detection - as toshiba drive - photo cd does not work with this drive. - - * sr.c: Update photocd code. - -Mon Jan 23 23:53:10 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.85 released. - - * st.c, st_ioctl.c, sg.c, sd_ioctl.c, scsi_ioctl.c, hosts.c: - include linux/mm.h - - * qlogic.c, buslogic.c, aha1542.c: Include linux/module.h. - -Sun Jan 22 22:08:46 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.84 released. - - * Makefile: Support for loadable QLOGIC boards. - - * aha152x.c: Update to version 1.8 from Juergen. - - * eata_dma.c: Update from Michael Neuffer. - Remove hard limit of 2 commands per lun and make it better - configurable. Improvements in HBA identification. - - * in2000.c: Fix biosparam to support large disks. - - * qlogic.c: Minor changes (change sti -> restore_flags). - -Wed Jan 18 23:33:09 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.83 released. - - * aha1542.c(aha1542_intr_handle): Use arguments handed down to find - which irq. - - * buslogic.c: Likewise. - - * eata_dma.c: Use min of 2 cmd_per_lun for OCS_enabled boards. - - * scsi.c: Make RECOVERED_ERROR a SUGGEST_IS_OK. - - * sd.c: Fail if we are opening a non-existent partition. - - * sr.c: Bump SR_TIMEOUT to 15000. - Do not probe for media size at boot time(hard on changers). - Flag device as needing sector size instead. - - * sr_ioctl.c: Remove CDROMMULTISESSION_SYS ioctl. - - * ultrastor.c: Fix bug in call to ultrastor_interrupt (wrong #args). - -Mon Jan 16 07:18:23 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.82 released. - - Throughout. - - Change all interrupt handlers to accept new calling convention. - In particular, we now receive the irq number as one of the arguments. - - * More minor spelling corrections in some of the new files. - - * aha1542.c, buslogic.c: Clean up interrupt handler a little now - that we receive the irq as an arg. - - * aha274x.c: s/snarf_region/request_region/ - - * eata.c: Update to version 1.12. Fix some comments and display a - message if we cannot reserve the port addresses. - - * u14-34f.c: Update to version 1.13. Fix some comments and display a - message if we cannot reserve the port addresses. - - * eata_dma.c: Define get_board_data function (send INQUIRY command). - Use to improve detection of variants of different DPT boards. Change - version subnumber to "0g". - - * fdomain.c: Update to version 5.26. Improve detection of some boards - repackaged by IBM. - - * scsi.c (scsi_register_host): Change "name" to const char *. - - * sr.c: Fix problem in set mode command for Toshiba drives. - - * sr.c: Fix typo from patch 81. - -Fri Jan 13 12:54:46 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.81 released. Codefreeze for 1.2 release announced. - - Big changes here. - - * eata_dma.*: New files from Michael Neuffer. - (neuffer@goofy.zdv.uni-mainz.de). Should support - all eata/dpt cards. - - * hosts.c, Makefile: Add eata_dma. - - * README.st: Document MTEOM. - - Patches from me (ERY) to finish support for low-level loadable scsi. - It now works, and is actually useful. - - * Throughout - add new argument to scsi_init_malloc that takes an - additional parameter. This is used as a priority to kmalloc, - and you can specify the GFP_DMA flag if you need DMA-able memory. - - * Makefile: For source files that are loadable, always add name - to SCSI_SRCS. Fill in modules: target. - - * hosts.c: Change next_host to next_scsi_host, and make global. - Print hosts after we have identified all of them. Use info() - function if present, otherwise use name field. - - * hosts.h: Change attach function to return int, not void. - Define number of device slots to allow for loadable devices. - Define tags to tell scsi module code what type of module we - are loading. - - * scsi.c: Fix scan_scsis so that it can be run by a user process. - Do not use waiting loops - use up and down mechanism as long - as current != task[0]. - - * scsi.c(scan_scsis): Do not use stack variables for I/O - this - could be > 16Mb if we are loading a module at runtime (i.e. use - scsi_init_malloc to get some memory we know will be safe). - - * scsi.c: Change dma freelist to be a set of pages. This allows - us to dynamically adjust the size of the list by adding more pages - to the pagelist. Fix scsi_malloc and scsi_free accordingly. - - * scsi_module.c: Fix include. - - * sd.c: Declare detach function. Increment/decrement module usage - count as required. Fix init functions to allow loaded devices. - Revalidate all new disks so we get the partition tables. Define - detach function. - - * sr.c: Likewise. - - * sg.c: Declare detach function. Allow attachment of devices on - loaded drivers. - - * st.c: Declare detach function. Increment/decrement module usage - count as required. - -Tue Jan 10 10:09:58 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.79 released. - - Patch from some undetermined individual who needs to get a life :-). - - * sr.c: Attacked by spelling bee... - - Patches from Gerd Knorr: - - * sr.c: make printk messages for photoCD a little more informative. - - * sr_ioctl.c: Fix CDROMMULTISESSION_SYS ioctl. - -Mon Jan 9 10:01:37 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.78 released. - - * Makefile: Add empty modules: target. - - * Wheee. Now change register_iomem to request_region. - - * in2000.c: Bugfix - apparently this is the fix that we have - all been waiting for. It fixes a problem whereby the driver - is not stable under heavy load. Race condition and all that. - Patch from Peter Lu. - -Wed Jan 4 21:17:40 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.77 released. - - * 53c7,8xx.c: Fix from Linus - emulate splx. - - Throughout: - - Change "snarf_region" with "register_iomem". - - * scsi_module.c: New file. Contains support for low-level loadable - scsi drivers. [ERY]. - - * sd.c: More s/int/long/ changes. - - * seagate.c: Explicitly include linux/config.h - - * sg.c: Increment/decrement module usage count on open/close. - - * sg.c: Be a bit more careful about the user not supplying enough - information for a valid command. Pass correct size down to - scsi_do_cmd. - - * sr.c: More changes for Photo-CD. This apparently breaks NEC drives. - - * sr_ioctl.c: Support CDROMMULTISESSION ioctl. - - -Sun Jan 1 19:55:21 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.76 released. - - * constants.c: Add type cast in switch statement. - - * scsi.c (scsi_free): Change datatype of "offset" to long. - (scsi_malloc): Change a few more variables to long. Who - did this and why was it important? 64 bit machines? - - - Lots of changes to use save_state/restore_state instead of cli/sti. - Files changed include: - - * aha1542.c: - * aha1740.c: - * buslogic.c: - * in2000.c: - * scsi.c: - * scsi_debug.c: - * sd.c: - * sr.c: - * st.c: - -Wed Dec 28 16:38:29 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.75 released. - - * buslogic.c: Spelling fix. - - * scsi.c: Add HP C1790A and C2500A scanjet to blacklist. - - * scsi.c: Spelling fixup. - - * sd.c: Add support for sd_hardsizes (hard sector sizes). - - * ultrastor.c: Use save_flags/restore_flags instead of cli/sti. - -Fri Dec 23 13:36:25 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.74 released. - - * README.st: Update from Kai Makisara. - - * eata.c: New version from Dario - version 1.11. - use scsicam bios_param routine. Add support for 2011 - and 2021 boards. - - * hosts.c: Add support for blocking. Linked list automatically - generated when shpnt->block is set. - - * scsi.c: Add sankyo & HP scanjet to blacklist. Add support for - kicking things loose when we deadlock. - - * scsi.c: Recognize scanners and processors in scan_scsis. - - * scsi_ioctl.h: Increase timeout to 9 seconds. - - * st.c: New version from Kai - add better support for backspace. - - * u14-34f.c: New version from Dario. Supports blocking. - -Wed Dec 14 14:46:30 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.73 released. - - * buslogic.c: Update from Dave Gentzel. Version 1.14. - Add module related stuff. More fault tolerant if out of - DMA memory. - - * fdomain.c: New version from Rik Faith - version 5.22. Add support - for ISA-200S SCSI adapter. - - * hosts.c: Spelling. - - * qlogic.c: Update to version 0.38a. Add more support for PCMCIA. - - * scsi.c: Mask device type with 0x1f during scan_scsis. - Add support for deadlocking, err, make that getting out of - deadlock situations that are created when we allow the user - to limit requests to one host adapter at a time. - - * scsi.c: Bugfix - pass pid, not SCpnt as second arg to - scsi_times_out. - - * scsi.c: Restore interrupt state to previous value instead of using - cli/sti pairs. - - * scsi.c: Add a bunch of module stuff (all commented out for now). - - * scsi.c: Clean up scsi_dump_status. - -Tue Dec 6 12:34:20 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.72 released. - - * sg.c: Bugfix - always use sg_free, since we might have big buff. - -Fri Dec 2 11:24:53 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.71 released. - - * sg.c: Clear buff field when not in use. Only call scsi_free if - non-null. - - * scsi.h: Call wake_up(&wait_for_request) when done with a - command. - - * scsi.c (scsi_times_out): Pass pid down so that we can protect - against race conditions. - - * scsi.c (scsi_abort): Zero timeout field if we get the - NOT_RUNNING message back from low-level driver. - - - * scsi.c (scsi_done): Restore cmd_len, use_sg here. - - * scsi.c (request_sense): Not here. - - * hosts.h: Add new forbidden_addr, forbidden_size fields. Who - added these and why???? - - * hosts.c (scsi_mem_init): Mark pages as reserved if they fall in - the forbidden regions. I am not sure - I think this is so that - we can deal with boards that do incomplete decoding of their - address lines for the bios chips, but I am not entirely sure. - - * buslogic.c: Set forbidden_addr stuff if using a buggy board. - - * aha1740.c: Test for NULL pointer in SCtmp. This should not - occur, but a nice message is better than a kernel segfault. - - * 53c7,8xx.c: Add new PCI chip ID for 815. - -Fri Dec 2 11:24:53 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.70 released. - - * ChangeLog, st.c: Spelling. - -Tue Nov 29 18:48:42 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.69 released. - - * u14-34f.h: Non-functional change. [Dario]. - - * u14-34f.c: Use block field in Scsi_Host to prevent commands from - being queued to more than one host at the same time (used when - motherboard does not deal with multiple bus-masters very well). - Only when SINGLE_HOST_OPERATIONS is defined. - Use new cmd_per_lun field. [Dario] - - * eata.c: Likewise. - - * st.c: More changes from Kai. Add ready flag to indicate drive - status. - - * README.st: Document this. - - * sr.c: Bugfix (do not subtract CD_BLOCK_OFFSET) for photo-cd - code. - - * sg.c: Bugfix - fix problem where opcode is not correctly set up. - - * seagate.[c,h]: Use #defines to set driver name. - - * scsi_ioctl.c: Zero buffer before executing command. - - * scsi.c: Use new cmd_per_lun field in Scsi_Hosts as appropriate. - Add Sony CDU55S to blacklist. - - * hosts.h: Add new cmd_per_lun field to Scsi_Hosts. - - * hosts.c: Initialize cmd_per_lun in Scsi_Hosts from template. - - * buslogic.c: Use cmd_per_lun field - initialize to different - values depending upon bus type (i.e. use 1 if ISA, so we do not - hog memory). Use other patches which got lost from 1.1.68. - - * aha1542.c: Spelling. - -Tue Nov 29 15:43:50 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.68 released. - - Add support for 12 byte vendor specific commands in scsi-generics, - more (i.e. the last mandatory) low-level changes to support - loadable modules, plus a few other changes people have requested - lately. Changes by me (ERY) unless otherwise noted. Spelling - changes appear from some unknown corner of the universe. - - * Throughout: Change COMMAND_SIZE() to use SCpnt->cmd_len. - - * Throughout: Change info() low level function to take a Scsi_Host - pointer. This way the info function can return specific - information about the host in question, if desired. - - * All low-level drivers: Add NULL in initializer for the - usage_count field added to Scsi_Host_Template. - - * aha152x.[c,h]: Remove redundant info() function. - - * aha1542.[c,h]: Likewise. - - * aha1740.[c,h]: Likewise. - - * aha274x.[c,h]: Likewise. - - * eata.[c,h]: Likewise. - - * pas16.[c,h]: Likewise. - - * scsi_debug.[c,h]: Likewise. - - * t128.[c,h]: Likewise. - - * u14-34f.[c,h]: Likewise. - - * ultrastor.[c,h]: Likewise. - - * wd7000.[c,h]: Likewise. - - * aha1542.c: Add support for command line options with lilo to set - DMA parameters, I/O port. From Matt Aarnio. - - * buslogic.[c,h]: New version (1.13) from Dave Gentzel. - - * hosts.h: Add new field to Scsi_Hosts "block" to allow blocking - all I/O to certain other cards. Helps prevent problems with some - ISA motherboards. - - * hosts.h: Add usage_count to Scsi_Host_Template. - - * hosts.h: Add n_io_port to Scsi_Host (used when releasing module). - - * hosts.c: Initialize block field. - - * in2000.c: Remove "static" declarations from exported functions. - - * in2000.h: Likewise. - - * scsi.c: Correctly set cmd_len field as required. Save and - change setting when doing a request_sense, restore when done. - Move abort timeout message. Fix panic in request_queueable to - print correct function name. - - * scsi.c: When incrementing usage count, walk block linked list - for host, and or in SCSI_HOST_BLOCK bit. When decrementing usage - count to 0, clear this bit to allow usage to continue, wake up - processes waiting. - - - * scsi_ioctl.c: If we have an info() function, call it, otherwise - if we have a "name" field, use it, else do nothing. - - * sd.c, sr.c: Clear cmd_len field prior to each command we - generate. - - * sd.h: Add "has_part_table" bit to rscsi_disks. - - * sg.[c,h]: Add support for vendor specific 12 byte commands (i.e. - override command length in COMMAND_SIZE). - - * sr.c: Bugfix from Gerd in photocd code. - - * sr.c: Bugfix in get_sectorsize - always use scsi_malloc buffer - - we cannot guarantee that the stack is < 16Mb. - -Tue Nov 22 15:40:46 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.67 released. - - * sr.c: Change spelling of manufactor to manufacturer. - - * scsi.h: Likewise. - - * scsi.c: Likewise. - - * qlogic.c: Spelling corrections. - - * in2000.h: Spelling corrections. - - * in2000.c: Update from Bill Earnest, change from - jshiffle@netcom.com. Support new bios versions. - - * README.qlogic: Spelling correction. - -Tue Nov 22 15:40:46 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.66 released. - - * u14-34f.c: Spelling corrections. - - * sr.[h,c]: Add support for multi-session CDs from Gerd Knorr. - - * scsi.h: Add manufactor field for keeping track of device - manufacturer. - - * scsi.c: More spelling corrections. - - * qlogic.h, qlogic.c, README.qlogic: New driver from Tom Zerucha. - - * in2000.c, in2000.h: New driver from Brad McLean/Bill Earnest. - - * fdomain.c: Spelling correction. - - * eata.c: Spelling correction. - -Fri Nov 18 15:22:44 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.65 released. - - * eata.h: Update version string to 1.08.00. - - * eata.c: Set sg_tablesize correctly for DPT PM2012 boards. - - * aha274x.seq: Spell checking. - - * README.st: Likewise. - - * README.aha274x: Likewise. - - * ChangeLog: Likewise. - -Tue Nov 15 15:35:08 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.64 released. - - * u14-34f.h: Update version number to 1.10.01. - - * u14-34f.c: Use Scsi_Host can_queue variable instead of one from template. - - * eata.[c,h]: New driver for DPT boards from Dario Ballabio. - - * buslogic.c: Use can_queue field. - -Wed Nov 30 12:09:09 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.63 released. - - * sd.c: Give I/O error if we attempt 512 byte I/O to a disk with - 1024 byte sectors. - - * scsicam.c: Make sure we do read from whole disk (mask off - partition). - - * scsi.c: Use can_queue in Scsi_Host structure. - Fix panic message about invalid host. - - * hosts.c: Initialize can_queue from template. - - * hosts.h: Add can_queue to Scsi_Host structure. - - * aha1740.c: Print out warning about NULL ecbptr. - -Fri Nov 4 12:40:30 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.62 released. - - * fdomain.c: Update to version 5.20. (From Rik Faith). Support - BIOS version 3.5. - - * st.h: Add ST_EOD symbol. - - * st.c: Patches from Kai Makisara - support additional densities, - add support for MTFSS, MTBSS, MTWSM commands. - - * README.st: Update to document new commands. - - * scsi.c: Add Mediavision CDR-H93MV to blacklist. - -Sat Oct 29 20:57:36 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.60 released. - - * u14-34f.[c,h]: New driver from Dario Ballabio. - - * aic7770.c, aha274x_seq.h, aha274x.seq, aha274x.h, aha274x.c, - README.aha274x: New files, new driver from John Aycock. - - -Tue Oct 11 08:47:39 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.54 released. - - * Add third PCI chip id. [Drew] - - * buslogic.c: Set BUSLOGIC_CMDLUN back to 1 [Eric]. - - * ultrastor.c: Fix asm directives for new GCC. - - * sr.c, sd.c: Use new end_scsi_request function. - - * scsi.h(end_scsi_request): Return pointer to block if still - active, else return NULL if inactive. Fixes race condition. - -Sun Oct 9 20:23:14 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.53 released. - - * scsi.c: Do not allocate dma bounce buffers if we have exactly - 16Mb. - -Fri Sep 9 05:35:30 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.51 released. - - * aha152x.c: Add support for disabling the parity check. Update - to version 1.4. [Juergen]. - - * seagate.c: Tweak debugging message. - -Wed Aug 31 10:15:55 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.50 released. - - * aha152x.c: Add eb800 for Vtech Platinum SMP boards. [Juergen]. - - * scsi.c: Add Quantum PD1225S to blacklist. - -Fri Aug 26 09:38:45 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.49 released. - - * sd.c: Fix bug when we were deleting the wrong entry if we - get an unsupported sector size device. - - * sr.c: Another spelling patch. - -Thu Aug 25 09:15:27 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.48 released. - - * Throughout: Use new semantics for request_dma, as appropriate. - - * sr.c: Print correct device number. - -Sun Aug 21 17:49:23 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.47 released. - - * NCR5380.c: Add support for LIMIT_TRANSFERSIZE. - - * constants.h: Add prototype for print_Scsi_Cmnd. - - * pas16.c: Some more minor tweaks. Test for Mediavision board. - Allow for disks > 1Gb. [Drew??] - - * sr.c: Set SCpnt->transfersize. - -Tue Aug 16 17:29:35 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.46 released. - - * Throughout: More spelling fixups. - - * buslogic.c: Add a few more fixups from Dave. Disk translation - mainly. - - * pas16.c: Add a few patches (Drew?). - - -Thu Aug 11 20:45:15 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.44 released. - - * hosts.c: Add type casts for scsi_init_malloc. - - * scsicam.c: Add type cast. - -Wed Aug 10 19:23:01 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.43 released. - - * Throughout: Spelling cleanups. [??] - - * aha152x.c, NCR53*.c, fdomain.c, g_NCR5380.c, pas16.c, seagate.c, - t128.c: Use request_irq, not irqaction. [??] - - * aha1542.c: Move test for shost before we start to use shost. - - * aha1542.c, aha1740.c, ultrastor.c, wd7000.c: Use new - calling sequence for request_irq. - - * buslogic.c: Update from Dave Gentzel. - -Tue Aug 9 09:32:59 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.42 released. - - * NCR5380.c: Change NCR5380_print_status to static. - - * seagate.c: A few more bugfixes. Only Drew knows what they are - for. - - * ultrastor.c: Tweak some __asm__ directives so that it works - with newer compilers. [??] - -Sat Aug 6 21:29:36 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.40 released. - - * NCR5380.c: Return SCSI_RESET_WAKEUP from reset function. - - * aha1542.c: Reset mailbox status after a bus device reset. - - * constants.c: Fix typo (;;). - - * g_NCR5380.c: - * pas16.c: Correct usage of NCR5380_init. - - * scsi.c: Remove redundant (and unused variables). - - * sd.c: Use memset to clear all of rscsi_disks before we use it. - - * sg.c: Ditto, except for scsi_generics. - - * sr.c: Ditto, except for scsi_CDs. - - * st.c: Initialize STp->device. - - * seagate.c: Fix bug. [Drew] - -Thu Aug 4 08:47:27 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.39 released. - - * Makefile: Fix typo in NCR53C7xx. - - * st.c: Print correct number for device. - -Tue Aug 2 11:29:14 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.38 released. - - Lots of changes in 1.1.38. All from Drew unless otherwise noted. - - * 53c7,8xx.c: New file from Drew. PCI driver. - - * 53c7,8xx.h: Likewise. - - * 53c7,8xx.scr: Likewise. - - * 53c8xx_d.h, 53c8xx_u.h, script_asm.pl: Likewise. - - * scsicam.c: New file from Drew. Read block 0 on the disk and - read the partition table. Attempt to deduce the geometry from - the partition table if possible. Only used by 53c[7,8]xx right - now, but could be used by any device for which we have no way - of identifying the geometry. - - * sd.c: Use device letters instead of sd%d in a lot of messages. - - * seagate.c: Fix bug that resulted in lockups with some devices. - - * sr.c (sr_open): Return -EROFS, not -EACCES if we attempt to open - device for write. - - * hosts.c, Makefile: Update for new driver. - - * NCR5380.c, NCR5380.h, g_NCR5380.h: Update from Drew to support - 53C400 chip. - - * constants.c: Define CONST_CMND and CONST_MSG. Other minor - cleanups along the way. Improve handling of CONST_MSG. - - * fdomain.c, fdomain.h: New version from Rik Faith. Update to - 5.18. Should now support TMC-3260 PCI card with 18C30 chip. - - * pas16.c: Update with new irq initialization. - - * t128.c: Update with minor cleanups. - - * scsi.c (scsi_pid): New variable - gives each command a unique - id. Add Quantum LPS5235S to blacklist. Change in_scan to - in_scan_scsis and make global. - - * scsi.h: Add some defines for extended message handling, - INITIATE/RELEASE_RECOVERY. Add a few new fields to support sync - transfers. - - * scsi_ioctl.h: Add ioctl to request synchronous transfers. - - -Tue Jul 26 21:36:58 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.37 released. - - * aha1542.c: Always call aha1542_mbenable, use new udelay - mechanism so we do not wait a long time if the board does not - implement this command. - - * g_NCR5380.c: Remove #include and #if - defined(CONFIG_SCSI_*). - - * seagate.c: Likewise. - - Next round of changes to support loadable modules. Getting closer - now, still not possible to do anything remotely usable. - - hosts.c: Create a linked list of detected high level devices. - (scsi_register_device): New function to insert into this list. - (scsi_init): Call scsi_register_device for each of the known high - level drivers. - - hosts.h: Add prototype for linked list header. Add structure - definition for device template structure which defines the linked - list. - - scsi.c: (scan_scsis): Use linked list instead of knowledge about - existing high level device drivers. - (scsi_dev_init): Use init functions for drivers on linked list - instead of explicit list to initialize and attach devices to high - level drivers. - - scsi.h: Add new field "attached" to scsi_device - count of number - of high level devices attached. - - sd.c, sr.c, sg.c, st.c: Adjust init/attach functions to use new - scheme. - -Sat Jul 23 13:03:17 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.35 released. - - * ultrastor.c: Change constraint on asm() operand so that it works - with gcc 2.6.0. - -Thu Jul 21 10:37:39 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.33 released. - - * sr.c(sr_open): Do not allow opens with write access. - -Mon Jul 18 09:51:22 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.31 released. - - * sd.c: Increase SD_TIMEOUT from 300 to 600. - - * sr.c: Remove stray task_struct* variable that was no longer - used. - - * sr_ioctl.c: Fix typo in up() call. - -Sun Jul 17 16:25:29 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.30 released. - - * scsi.c (scan_scsis): Fix detection of some Toshiba CDROM drives - that report themselves as disk drives. - - * (Throughout): Use request.sem instead of request.waiting. - Should fix swap problem with fdomain. - -Thu Jul 14 10:51:42 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.29 released. - - * scsi.c (scan_scsis): Add new devices to end of linked list, not - to the beginning. - - * scsi.h (SCSI_SLEEP): Remove brain dead hack to try to save - the task state before sleeping. - -Sat Jul 9 15:01:03 1994 Eric Youngdale (eric@esp22) - - More changes to eventually support loadable modules. Mainly - we want to use linked lists instead of arrays because it is easier - to dynamically add and remove things this way. - - Quite a bit more work is needed before loadable modules are - possible (and usable) with scsi, but this is most of the grunge - work. - - * Linux 1.1.28 released. - - * scsi.c, scsi.h (allocate_device, request_queueable): Change - argument from index into scsi_devices to a pointer to the - Scsi_Device struct. - - * Throughout: Change all calls to allocate_device, - request_queueable to use new calling sequence. - - * Throughout: Use SCpnt->device instead of - scsi_devices[SCpnt->index]. Ugh - the pointer was there all along - - much cleaner this way. - - * scsi.c (scsi_init_malloc, scsi_free_malloc): New functions - - allow us to pretend that we have a working malloc when we - initialize. Use this instead of passing memory_start, memory_end - around all over the place. - - * scsi.h, st.c, sr.c, sd.c, sg.c: Change *_init1 functions to use - scsi_init_malloc, remove all arguments, no return value. - - * scsi.h: Remove index field from Scsi_Device and Scsi_Cmnd - structs. - - * scsi.c (scsi_dev_init): Set up for scsi_init_malloc. - (scan_scsis): Get SDpnt from scsi_init_malloc, and refresh - when we discover a device. Free pointer before returning. - Change scsi_devices into a linked list. - - * scsi.c (scan_scsis): Change to only scan one host. - (scsi_dev_init): Loop over all detected hosts, and scan them. - - * hosts.c (scsi_init_free): Change so that number of extra bytes - is stored in struct, and we do not have to pass it each time. - - * hosts.h: Change Scsi_Host_Template struct to include "next" and - "release" functions. Initialize to NULL in all low level - adapters. - - * hosts.c: Rename scsi_hosts to builtin_scsi_hosts, create linked - list scsi_hosts, linked together with the new "next" field. - -Wed Jul 6 05:45:02 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.25 released. - - * aha152x.c: Changes from Juergen - cleanups and updates. - - * sd.c, sr.c: Use new check_media_change and revalidate - file_operations fields. - - * st.c, st.h: Add changes from Kai Makisara, dated Jun 22. - - * hosts.h: Change SG_ALL back to 0xff. Apparently soft error - in /dev/brain resulted in having this bumped up. - Change first parameter in bios_param function to be Disk * instead - of index into rscsi_disks. - - * sd_ioctl.c: Pass pointer to rscsi_disks element instead of index - to array. - - * sd.h: Add struct name "scsi_disk" to typedef for Scsi_Disk. - - * scsi.c: Remove redundant Maxtor XT8760S from blacklist. - In scsi_reset, add printk when DEBUG defined. - - * All low level drivers: Modify definitions of bios_param in - appropriate way. - -Thu Jun 16 10:31:59 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.20 released. - - * scsi_ioctl.c: Only pass down the actual number of characters - required to scsi_do_cmd, not the one rounded up to a even number - of sectors. - - * ultrastor.c: Changes from Caleb Epstein for 24f cards. Support - larger SG lists. - - * ultrastor.c: Changes from me - use scsi_register to register - host. Add some consistency checking, - -Wed Jun 1 21:12:13 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.19 released. - - * scsi.h: Add new return code for reset() function: - SCSI_RESET_PUNT. - - * scsi.c: Make SCSI_RESET_PUNT the same as SCSI_RESET_WAKEUP for - now. - - * aha1542.c: If the command responsible for the reset is not - pending, return SCSI_RESET_PUNT. - - * aha1740.c, buslogic.c, wd7000.c, ultrastor.c: Return - SCSI_RESET_PUNT instead of SCSI_RESET_SNOOZE. - -Tue May 31 19:36:01 1994 Eric Youngdale (eric@esp22) - - * buslogic.c: Do not print out message about "must be Adaptec" - if we have detected a buslogic card. Print out a warning message - if we are configuring for >16Mb, since the 445S at board level - D or earlier does not work right. The "D" level board can be made - to work by flipping an undocumented switch, but this is too subtle. - - Changes based upon patches in Yggdrasil distribution. - - * sg.c, sg.h: Return sense data to user. - - * aha1542.c, aha1740.c, buslogic.c: Do not panic if - sense buffer is wrong size. - - * hosts.c: Test for ultrastor card before any of the others. - - * scsi.c: Allow boot-time option for max_scsi_luns=? so that - buggy firmware has an easy work-around. - -Sun May 15 20:24:34 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.15 released. - - Post-codefreeze thaw... - - * buslogic.[c,h]: New driver from David Gentzel. - - * hosts.h: Add use_clustering field to explicitly say whether - clustering should be used for devices attached to this host - adapter. The buslogic board apparently supports large SG lists, - but it is apparently faster if sd.c condenses this into a smaller - list. - - * sd.c: Use this field instead of heuristic. - - * All host adapter include files: Add appropriate initializer for - use_clustering field. - - * scsi.h: Add #defines for return codes for the abort and reset - functions. There are now a specific set of return codes to fully - specify all of the possible things that the low-level adapter - could do. - - * scsi.c: Act based upon return codes from abort/reset functions. - - * All host adapter abort/reset functions: Return new return code. - - * Add code in scsi.c to help debug timeouts. Use #define - DEBUG_TIMEOUT to enable this. - - * scsi.c: If the host->irq field is set, use - disable_irq/enable_irq before calling queuecommand if we - are not already in an interrupt. Reduce races, and we - can be sloppier about cli/sti in the interrupt routines now - (reduce interrupt latency). - - * constants.c: Fix some things to eliminate warnings. Add some - sense descriptions that were omitted before. - - * aha1542.c: Watch for SCRD from host adapter - if we see it, set - a flag. Currently we only print out the number of pending - commands that might need to be restarted. - - * aha1542.c (aha1542_abort): Look for lost interrupts, OGMB still - full, and attempt to recover. Otherwise give up. - - * aha1542.c (aha1542_reset): Try BUS DEVICE RESET, and then pass - DID_RESET back up to the upper level code for all commands running - on this target (even on different LUNs). - -Sat May 7 14:54:01 1994 - - * Linux 1.1.12 released. - - * st.c, st.h: New version from Kai. Supports boot time - specification of number of buffers. - - * wd7000.[c,h]: Updated driver from John Boyd. Now supports - more than one wd7000 board in machine at one time, among other things. - -Wed Apr 20 22:20:35 1994 - - * Linux 1.1.8 released. - - * sd.c: Add a few type casts where scsi_malloc is called. - -Wed Apr 13 12:53:29 1994 - - * Linux 1.1.4 released. - - * scsi.c: Clean up a few printks (use %p to print pointers). - -Wed Apr 13 11:33:02 1994 - - * Linux 1.1.3 released. - - * fdomain.c: Update to version 5.16 (Handle different FIFO sizes - better). - -Fri Apr 8 08:57:19 1994 - - * Linux 1.1.2 released. - - * Throughout: SCSI portion of cluster diffs added. - -Tue Apr 5 07:41:50 1994 - - * Linux 1.1 development tree initiated. - - * The linux 1.0 development tree is now effectively frozen except - for obvious bugfixes. - -****************************************************************** -****************************************************************** -****************************************************************** -****************************************************************** - -Sun Apr 17 00:17:39 1994 - - * Linux 1.0, patchlevel 9 released. - - * fdomain.c: Update to version 5.16 (Handle different FIFO sizes - better). - -Thu Apr 7 08:36:20 1994 - - * Linux 1.0, patchlevel8 released. - - * fdomain.c: Update to version 5.15 from 5.9. Handles 3.4 bios. - -Sun Apr 3 14:43:03 1994 - - * Linux 1.0, patchlevel6 released. - - * wd7000.c: Make stab at fixing race condition. - -Sat Mar 26 14:14:50 1994 - - * Linux 1.0, patchlevel5 released. - - * aha152x.c, Makefile: Fix a few bugs (too much data message). - Add a few more bios signatures. (Patches from Juergen). - - * aha1542.c: Fix race condition in aha1542_out. - -Mon Mar 21 16:36:20 1994 - - * Linux 1.0, patchlevel3 released. - - * sd.c, st.c, sr.c, sg.c: Return -ENXIO, not -ENODEV if we attempt - to open a non-existent device. - - * scsi.c: Add Chinon cdrom to blacklist. - - * sr_ioctl.c: Check return status of verify_area. - -Sat Mar 6 16:06:19 1994 - - * Linux 1.0 released (technically a pre-release). - - * scsi.c: Add IMS CDD521, Maxtor XT-8760S to blacklist. - -Tue Feb 15 10:58:20 1994 - - * pl15e released. - - * aha1542.c: For 1542C, allow dynamic device scan with >1Gb turned - off. - - * constants.c: Fix typo in definition of CONSTANTS. - - * pl15d released. - -Fri Feb 11 10:10:16 1994 - - * pl15c released. - - * scsi.c: Add Maxtor XT-3280 and Rodime RO3000S to blacklist. - - * scsi.c: Allow tagged queueing for scsi 3 devices as well. - Some really old devices report a version number of 0. Disallow - LUN != 0 for these. - -Thu Feb 10 09:48:57 1994 - - * pl15b released. - -Sun Feb 6 12:19:46 1994 - - * pl15a released. - -Fri Feb 4 09:02:17 1994 - - * scsi.c: Add Teac cdrom to blacklist. - -Thu Feb 3 14:16:43 1994 - - * pl15 released. - -Tue Feb 1 15:47:43 1994 - - * pl14w released. - - * wd7000.c (wd_bases): Fix typo in last change. - -Mon Jan 24 17:37:23 1994 - - * pl14u released. - - * aha1542.c: Support 1542CF/extended bios. Different from 1542C - - * wd7000.c: Allow bios at 0xd8000 as well. - - * ultrastor.c: Do not truncate cylinders to 1024. - - * fdomain.c: Update to version 5.9 (add new bios signature). - - * NCR5380.c: Update from Drew - should work a lot better now. - -Sat Jan 8 15:13:10 1994 - - * pl14o released. - - * sr_ioctl.c: Zero reserved field before trying to set audio volume. - -Wed Jan 5 13:21:10 1994 - - * pl14m released. - - * fdomain.c: Update to version 5.8. No functional difference??? - -Tue Jan 4 14:26:13 1994 - - * pl14l released. - - * ultrastor.c: Remove outl, inl functions (now provided elsewhere). - -Mon Jan 3 12:27:25 1994 - - * pl14k released. - - * aha152x.c: Remove insw and outsw functions. - - * fdomain.c: Ditto. - -Wed Dec 29 09:47:20 1993 - - * pl14i released. - - * scsi.c: Support RECOVERED_ERROR for tape drives. - - * st.c: Update of tape driver from Kai. - -Tue Dec 21 09:18:30 1993 - - * pl14g released. - - * aha1542.[c,h]: Support extended BIOS stuff. - - * scsi.c: Clean up messages about disks, so they are displayed as - sda, sdb, etc instead of sd0, sd1, etc. - - * sr.c: Force reread of capacity if disk was changed. - Clear buffer before asking for capacity/sectorsize (some drives - do not report this properly). Set needs_sector_size flag if - drive did not return sensible sector size. - -Mon Dec 13 12:13:47 1993 - - * aha152x.c: Update to version .101 from Juergen. - -Mon Nov 29 03:03:00 1993 - - * linux 0.99.14 released. - - * All scsi stuff moved from kernel/blk_drv/scsi to drivers/scsi. - - * Throughout: Grammatical corrections to various comments. - - * Makefile: fix so that we do not need to compile things we are - not going to use. - - * NCR5380.c, NCR5380.h, g_NCR5380.c, g_NCR5380.h, pas16.c, - pas16.h, t128.c, t128.h: New files from Drew. - - * aha152x.c, aha152x.h: New files from Juergen Fischer. - - * aha1542.c: Support for more than one 1542 in the machine - at the same time. Make functions static that do not need - visibility. - - * aha1740.c: Set NEEDS_JUMPSTART flag in reset function, so we - know to restart the command. Change prototype of aha1740_reset - to take a command pointer. - - * constants.c: Clean up a few things. - - * fdomain.c: Update to version 5.6. Move snarf_region. Allow - board to be set at different SCSI ids. Remove support for - reselection (did not work well). Set JUMPSTART flag in reset - code. - - * hosts.c: Support new low-level adapters. Allow for more than - one adapter of a given type. - - * hosts.h: Allow for more than one adapter of a given type. - - * scsi.c: Add scsi_device_types array, if NEEDS_JUMPSTART is set - after a low-level reset, start the command again. Sort blacklist, - and add Maxtor MXT-1240S, XT-4170S, NEC CDROM 84, Seagate ST157N. - - * scsi.h: Add constants for tagged queueing. - - * Throughout: Use constants from major.h instead of hardcoded - numbers for major numbers. - - * scsi_ioctl.c: Fix bug in buffer length in ioctl_command. Use - verify_area in GET_IDLUN ioctl. Add new ioctls for - TAGGED_QUEUE_ENABLE, DISABLE. Only allow IOCTL_SEND_COMMAND by - superuser. - - * sd.c: Only pay attention to UNIT_ATTENTION for removable disks. - Fix bug where sometimes portions of blocks would get lost - resulting in processes hanging. Add messages when we spin up a - disk, and fix a bug in the timing. Increase read-ahead for disks - that are on a scatter-gather capable host adapter. - - * seagate.c: Fix so that some parameters can be set from the lilo - prompt. Supply jumpstart flag if we are resetting and need the - command restarted. Fix so that we return 1 if we detect a card - so that multiple card detection works correctly. Add yet another - signature for FD cards (950). Add another signature for ST0x. - - * sg.c, sg.h: New files from Lawrence Foard for generic scsi - access. - - * sr.c: Add type casts for (void*) so that we can do pointer - arithmetic. Works with GCC without this, but it is not strictly - correct. Same bugfix as was in sd.c. Increase read-ahead a la - disk driver. - - * sr_ioctl.c: Use scsi_malloc buffer instead of buffer from stack - since we cannot guarantee that the stack is < 16Mb. - - ultrastor.c: Update to support 24f properly (JFC's driver). - - wd7000.c: Supply jumpstart flag for reset. Do not round up - number of cylinders in biosparam function. - -Sat Sep 4 20:49:56 1993 - - * 0.99pl13 released. - - * Throughout: Use check_region/snarf_region for all low-level - drivers. - - * aha1542.c: Do hard reset instead of soft (some ethercard probes - screw us up). - - * scsi.c: Add new flag ASKED_FOR_SENSE so that we can tell if we are - in a loop whereby the device returns null sense data. - - * sd.c: Add code to spin up a drive if it is not already spinning. - Do this one at a time to make it easier on power supplies. - - * sd_ioctl.c: Use sync_dev instead of fsync_dev in BLKFLSBUF ioctl. - - * seagate.c: Switch around DATA/CONTROL lines. - - * st.c: Change sense to unsigned. - -Thu Aug 5 11:59:18 1993 - - * 0.99pl12 released. - - * constants.c, constants.h: New files with ascii descriptions of - various conditions. - - * Makefile: Do not try to count the number of low-level drivers, - just generate the list of .o files. - - * aha1542.c: Replace 16 with sizeof(SCpnt->sense_buffer). Add tests - for addresses > 16Mb, panic if we find one. - - * aha1740.c: Ditto with sizeof(). - - * fdomain.c: Update to version 3.18. Add new signature, register IRQ - with irqaction. Use ID 7 for new board. Be more intelligent about - obtaining the h/s/c numbers for biosparam. - - * hosts.c: Do not depend upon Makefile generated count of the number - of low-level host adapters. - - * scsi.c: Use array for scsi_command_size instead of a function. Add - Texel cdrom and Maxtor XT-4380S to blacklist. Allow compile time - option for no-multi lun scan. Add semaphore for possible problems - with handshaking, assume device is faulty until we know it not to be - the case. Add DEBUG_INIT symbol to dump info as we scan for devices. - Zero sense buffer so we can tell if we need to request it. When - examining sense information, request sense if buffer is all zero. - If RESET, request sense information to see what to do next. - - * scsi_debug.c: Change some constants to use symbols like INT_MAX. - - * scsi_ioctl.c (kernel_scsi_ioctl): New function -for making ioctl - calls from kernel space. - - * sd.c: Increase timeout to 300. Use functions in constants.h to - display info. Use scsi_malloc buffer for READ_CAPACITY, since - we cannot guarantee that a stack based buffer is < 16Mb. - - * sd_ioctl.c: Add BLKFLSBUF ioctl. - - * seagate.c: Add new compile time options for ARBITRATE, - SLOW_HANDSHAKE, and SLOW_RATE. Update assembly loops for transferring - data. Use kernel_scsi_ioctl to request mode page with geometry. - - * sr.c: Use functions in constants.c to display messages. - - * st.c: Support for variable block size. - - * ultrastor.c: Do not use cache for tape drives. Set - unchecked_isa_dma flag, even though this may not be needed (gets set - later). - -Sat Jul 17 18:32:44 1993 - - * 0.99pl11 released. C++ compilable. - - * Throughout: Add type casts all over the place, and use "ip" instead - of "info" in the various biosparam functions. - - * Makefile: Compile seagate.c with C++ compiler. - - * aha1542.c: Always set ccb pointer as this gets trashed somehow on - some systems. Add a few type casts. Update biosparam function a little. - - * aha1740.c: Add a few type casts. - - * fdomain.c: Update to version 3.17 from 3.6. Now works with - TMC-18C50. - - * scsi.c: Minor changes here and there with datatypes. Save use_sg - when requesting sense information so that this can properly be - restored if we retry the command. Set aside dma buffers assuming each - block is 1 page, not 1Kb minix block. - - * scsi_ioctl.c: Add a few type casts. Other minor changes. - - * sd.c: Correctly free all scsi_malloc'd memory if we run out of - dma_pool. Store blocksize information for each partition. - - * seagate.c: Minor cleanups here and there. - - * sr.c: Set up blocksize array for all discs. Fix bug in freeing - buffers if we run out of dma pool. - -Thu Jun 2 17:58:11 1993 - - * 0.99pl10 released. - - * aha1542.c: Support for BT 445S (VL-bus board with no dma channel). - - * fdomain.c: Upgrade to version 3.6. Preliminary support for TNC-18C50. - - * scsi.c: First attempt to fix problem with old_use_sg. Change - NOT_READY to a SUGGEST_ABORT. Fix timeout race where time might - get decremented past zero. - - * sd.c: Add block_fsync function to dispatch table. - - * sr.c: Increase timeout to 500 from 250. Add entry for sync in - dispatch table (supply NULL). If we do not have a sectorsize, - try to get it in the sd_open function. Add new function just to - obtain sectorsize. - - * sr.h: Add needs_sector_size semaphore. - - * st.c: Add NULL for fsync in dispatch table. - - * wd7000.c: Allow another condition for power on that are normal - and do not require a panic. - -Thu Apr 22 23:10:11 1993 - - * 0.99pl9 released. - - * aha1542.c: Use (void) instead of () in setup_mailboxes. - - * scsi.c: Initialize transfersize and underflow fields in SCmd to 0. - Do not panic for unsupported message bytes. - - * scsi.h: Allocate 12 bytes instead of 10 for commands. Add - transfersize and underflow fields. - - * scsi_ioctl.c: Further bugfix to ioctl_probe. - - * sd.c: Use long instead of int for last parameter in sd_ioctl. - Initialize transfersize and underflow fields. - - * sd_ioctl.c: Ditto for sd_ioctl(,,,,); - - * seagate.c: New version from Drew. Includes new signatures for FD - cards. Support for 0ws jumper. Correctly initialize - scsi_hosts[hostnum].this_id. Improved handing of - disconnect/reconnect, and support command linking. Use - transfersize and underflow fields. Support scatter-gather. - - * sr.c, sr_ioctl.c: Use long instead of int for last parameter in sr_ioctl. - Use buffer and buflength in do_ioctl. Patches from Chris Newbold for - scsi-2 audio commands. - - * ultrastor.c: Comment out in_byte (compiler warning). - - * wd7000.c: Change () to (void) in wd7000_enable_dma. - -Wed Mar 31 16:36:25 1993 - - * 0.99pl8 released. - - * aha1542.c: Handle mailboxes better for 1542C. - Do not truncate number of cylinders at 1024 for biosparam call. - - * aha1740.c: Fix a few minor bugs for multiple devices. - Same as above for biosparam. - - * scsi.c: Add lockable semaphore for removable devices that can have - media removal prevented. Add another signature for flopticals. - (allocate_device): Fix race condition. Allow more space in dma pool - for blocksizes of up to 4Kb. - - * scsi.h: Define COMMAND_SIZE. Define a SCSI specific version of - INIT_REQUEST that can run with interrupts off. - - * scsi_ioctl.c: Make ioctl_probe function more idiot-proof. If - a removable device says ILLEGAL REQUEST to a door-locking command, - clear lockable flag. Add SCSI_IOCTL_GET_IDLUN ioctl. Do not attempt - to lock door for devices that do not have lockable semaphore set. - - * sd.c: Fix race condition for multiple disks. Use INIT_SCSI_REQUEST - instead of INIT_REQUEST. Allow sector sizes of 1024 and 256. For - removable disks that are not ready, mark them as having a media change - (some drives do not report this later). - - * seagate.c: Use volatile keyword for memory-mapped register pointers. - - * sr.c: Fix race condition, a la sd.c. Increase the number of retries - to 1. Use INIT_SCSI_REQUEST. Allow 512 byte sector sizes. Do a - read_capacity when we init the device so we know the size and - sectorsize. - - * st.c: If ioctl not found in st.c, try scsi_ioctl for others. - - * ultrastor.c: Do not truncate number of cylinders at 1024 for - biosparam call. - - * wd7000.c: Ditto. - Throughout: Use COMMAND_SIZE macro to determine length of scsi - command. - - - -Sat Mar 13 17:31:29 1993 - - * 0.99pl7 released. - - Throughout: Improve punctuation in some messages, and use new - verify_area syntax. - - * aha1542.c: Handle unexpected interrupts better. - - * scsi.c: Ditto. Handle reset conditions a bit better, asking for - sense information and retrying if required. - - * scsi_ioctl.c: Allow for 12 byte scsi commands. - - * ultrastor.c: Update to use scatter-gather. - -Sat Feb 20 17:57:15 1993 - - * 0.99pl6 released. - - * fdomain.c: Update to version 3.5. Handle spurious interrupts - better. - - * sd.c: Use register_blkdev function. - - * sr.c: Ditto. - - * st.c: Use register_chrdev function. - - * wd7000.c: Undo previous change. - -Sat Feb 6 11:20:43 1993 - - * 0.99pl5 released. - - * scsi.c: Fix bug in testing for UNIT_ATTENTION. - - * wd7000.c: Check at more addresses for bios. Fix bug in biosparam - (heads & sectors turned around). - -Wed Jan 20 18:13:59 1993 - - * 0.99pl4 released. - - * scsi.c: Ignore leading spaces when looking for blacklisted devices. - - * seagate.c: Add a few new signatures for FD cards. Another patch - with SCint to fix race condition. Use recursion_depth to keep track - of how many times we have been recursively called, and do not start - another command unless we are on the outer level. Fixes bug - with Syquest cartridge drives (used to crash kernel), because - they do not disconnect with large data transfers. - -Tue Jan 12 14:33:36 1993 - - * 0.99pl3 released. - - * fdomain.c: Update to version 3.3 (a few new signatures). - - * scsi.c: Add CDU-541, Denon DRD-25X to blacklist. - (allocate_request, request_queueable): Init request.waiting to NULL if - non-buffer type of request. - - * seagate.c: Allow controller to be overridden with CONTROLLER symbol. - Set SCint=NULL when we are done, to remove race condition. - - * st.c: Changes from Kai. - -Wed Dec 30 20:03:47 1992 - - * 0.99pl2 released. - - * scsi.c: Blacklist back in. Remove Newbury drive as other bugfix - eliminates need for it here. - - * sd.c: Return ENODEV instead of EACCES if no such device available. - (sd_init) Init blkdev_fops earlier so that sd_open is available sooner. - - * sr.c: Same as above for sd.c. - - * st.c: Return ENODEV instead of ENXIO if no device. Init chrdev_fops - sooner, so that it is always there even if no tapes. - - * seagate.c (controller_type): New variable to keep track of ST0x or - FD. Modify signatures list to indicate controller type, and init - controller_type once we find a match. - - * wd7000.c (wd7000_set_sync): Remove redundant function. - -Sun Dec 20 16:26:24 1992 - - * 0.99pl1 released. - - * scsi_ioctl.c: Bugfix - check dev->index, not dev->id against - NR_SCSI_DEVICES. - - * sr_ioctl.c: Verify that device exists before allowing an ioctl. - - * st.c: Patches from Kai - change timeout values, improve end of tape - handling. - -Sun Dec 13 18:15:23 1992 - - * 0.99 kernel released. Baseline for this ChangeLog. -- cgit From 616434e2aa7091f0fc5f7838af0f8bc809c8cf85 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Mar 2018 08:37:52 +0100 Subject: scsi: remove the sym53c416 driver This driver hasn't seen any recent bug fixing and is one of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- Documentation/scsi/scsi-parameters.txt | 3 --- 1 file changed, 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 8f7be8a05642..2dc7f11179d1 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -108,9 +108,6 @@ parameters may be changed at runtime by the command st= [HW,SCSI] SCSI tape parameters (buffers, etc.) See Documentation/scsi/st.txt. - sym53c416= [HW,SCSI] - See header of drivers/scsi/sym53c416.c. - tmscsim= [HW,SCSI] See comment before function dc390_setup() in drivers/scsi/tmscsim.c. -- cgit From 83c9f08e6c6a6dc668384882de4dcf5ef4ae0ba7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Mar 2018 08:37:53 +0100 Subject: scsi: remove the old scsi_module.c initialization model After more than 15 years all users of this legacy interface are finally gone. Rest in peace! Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- Documentation/driver-api/scsi.rst | 6 -- Documentation/scsi/scsi_mid_low_api.txt | 122 +------------------------------- 2 files changed, 1 insertion(+), 127 deletions(-) (limited to 'Documentation') diff --git a/Documentation/driver-api/scsi.rst b/Documentation/driver-api/scsi.rst index 3ae337929721..31ad0fed6763 100644 --- a/Documentation/driver-api/scsi.rst +++ b/Documentation/driver-api/scsi.rst @@ -154,12 +154,6 @@ lists). .. kernel-doc:: drivers/scsi/scsi_lib_dma.c :export: -drivers/scsi/scsi_module.c -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The file drivers/scsi/scsi_module.c contains legacy support for -old-style host templates. It should never be used by any new driver. - drivers/scsi/scsi_proc.c ~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 2c31d9ee6776..177c031763c0 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -114,9 +114,7 @@ called "xxx" could be defined as "static int xxx_slave_alloc(struct scsi_device * sdev) { /* code */ }" ** the scsi_host_alloc() function is a replacement for the rather vaguely -named scsi_register() function in most situations. The scsi_register() -and scsi_unregister() functions remain to support legacy LLDs that use -the passive initialization model. +named scsi_register() function in most situations. Hotplug initialization model @@ -228,79 +226,6 @@ slave_configure() callbacks). Such instances are "owned" by the mid-level. struct scsi_device instances are freed after slave_destroy(). -Passive initialization model -============================ -These older LLDs include a file called "scsi_module.c" [yes the ".c" is a -little surprising] in their source code. For that file to work an -instance of struct scsi_host_template with the name "driver_template" -needs to be defined. Here is a typical code sequence used in this model: - static struct scsi_host_template driver_template = { - ... - }; - #include "scsi_module.c" - -The scsi_module.c file contains two functions: - - init_this_scsi_driver() which is executed when the LLD is - initialized (i.e. boot time or module load time) - - exit_this_scsi_driver() which is executed when the LLD is shut - down (i.e. module unload time) -Note: since these functions are tagged with __init and __exit qualifiers -an LLD should not call them explicitly (since the kernel does that). - -Here is an example of an initialization sequence when two hosts are -detected (so detect() returns 2) and the SCSI bus scan on each host -finds 1 SCSI device (and a second device does not respond). - -LLD mid level LLD -===----------------------=========-----------------===------ -init_this_scsi_driver() ----+ - | - detect() -----------------+ - | | - | scsi_register() - | scsi_register() - | - slave_alloc() - slave_configure() --> scsi_change_queue_depth() - slave_alloc() *** - slave_destroy() *** - | - slave_alloc() - slave_configure() - slave_alloc() *** - slave_destroy() *** ------------------------------------------------------------- - -The mid level invokes scsi_change_queue_depth() with "cmd_per_lun" for that -host as the queue length. These settings can be overridden by a -slave_configure() supplied by the LLD. - -*** For scsi devices that the mid level tries to scan but do not - respond, a slave_alloc(), slave_destroy() pair is called. - -Here is an LLD shutdown sequence: - -LLD mid level LLD -===----------------------=========-----------------===------ -exit_this_scsi_driver() ----+ - | - slave_destroy() - release() --> scsi_unregister() - | - slave_destroy() - release() --> scsi_unregister() ------------------------------------------------------------- - -An LLD need not define slave_destroy() (i.e. it is optional). - -The shortcoming of the "passive initialization model" is that host -registration and de-registration are (typically) tied to LLD initialization -and shutdown. Once the LLD is initialized then a new host that appears -(e.g. via hotplugging) cannot easily be added without a redundant -driver shutdown and re-initialization. It may be possible to write an LLD -that uses both initialization models. - - Reference Counting ================== The Scsi_Host structure has had reference counting infrastructure added. @@ -738,7 +663,6 @@ The interface functions are listed below in alphabetical order. Summary: bios_param - fetch head, sector, cylinder info for a disk - detect - detects HBAs this driver wants to control eh_timed_out - notify the host that a command timer expired eh_abort_handler - abort given command eh_bus_reset_handler - issue SCSI bus reset @@ -748,7 +672,6 @@ Summary: ioctl - driver can respond to ioctls proc_info - supports /proc/scsi/{driver_name}/{host_no} queuecommand - queue scsi command, invoke 'done' on completion - release - release all resources associated with given host slave_alloc - prior to any commands being sent to a new device slave_configure - driver fine tuning for given device after attach slave_destroy - given device is about to be shut down @@ -784,28 +707,6 @@ Details: sector_t capacity, int params[3]) -/** - * detect - detects HBAs this driver wants to control - * @shtp: host template for this driver. - * - * Returns number of hosts this driver wants to control. 0 means no - * suitable hosts found. - * - * Locks: none held - * - * Calling context: process [invoked from init_this_scsi_driver()] - * - * Notes: First function called from the SCSI mid level on this - * driver. Upper level drivers (e.g. sd) may not (yet) be present. - * For each host found, this method should call scsi_register() - * [see hosts.c]. - * - * Defined in: LLD (required if "passive initialization mode" is used, - * not invoked in "hotplug initialization mode") - **/ - int detect(struct scsi_host_template * shtp) - - /** * eh_timed_out - The timer for the command has just fired * @scp: identifies command timing out @@ -1073,27 +974,6 @@ Details: int queuecommand(struct Scsi_Host *shost, struct scsi_cmnd * scp) -/** - * release - release all resources associated with given host - * @shp: host to be released. - * - * Return value ignored (could soon be a function returning void). - * - * Locks: none held - * - * Calling context: process - * - * Notes: Invoked from scsi_module.c's exit_this_scsi_driver(). - * LLD's implementation of this function should call - * scsi_unregister(shp) prior to returning. - * Only needed for old-style host templates. - * - * Defined in: LLD (required in "passive initialization model", - * should not be defined in hotplug model) - **/ - int release(struct Scsi_Host * shp) - - /** * slave_alloc - prior to any commands being sent to a new device * (i.e. just prior to scan) this call is made -- cgit From c121107d0f8473bf9aa5fe1c32adab0a40f093e2 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 19 Mar 2018 23:01:58 -0400 Subject: scsi: documentation: Obsolete documentation references Remove references to fdomain, ncr53c400a, tmscsim, and DAC960 from Documentation/scsi. Signed-off-by: Martin K. Petersen --- Documentation/scsi/Mylex.txt | 5 - Documentation/scsi/scsi-parameters.txt | 9 - Documentation/scsi/tmscsim.txt | 443 --------------------------------- 3 files changed, 457 deletions(-) delete mode 100644 Documentation/scsi/Mylex.txt delete mode 100644 Documentation/scsi/tmscsim.txt (limited to 'Documentation') diff --git a/Documentation/scsi/Mylex.txt b/Documentation/scsi/Mylex.txt deleted file mode 100644 index 3797f3e6c2b5..000000000000 --- a/Documentation/scsi/Mylex.txt +++ /dev/null @@ -1,5 +0,0 @@ -Please see the file README.BusLogic for information about Linux support for -Mylex (formerly BusLogic) MultiMaster and FlashPoint SCSI Host Adapters. - -The Mylex DAC960 PCI RAID Controllers are now supported. Please consult -http://sourceforge.net/projects/dandelion for further information on the DAC960 driver. diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 2dc7f11179d1..25a4b4cf04a6 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -34,9 +34,6 @@ parameters may be changed at runtime by the command See drivers/scsi/BusLogic.c, comment before function BusLogic_ParseDriverOptions(). - fdomain= [HW,SCSI] - See header of drivers/scsi/fdomain.c. - gdth= [HW,SCSI] See header of drivers/scsi/gdth.c. @@ -68,8 +65,6 @@ parameters may be changed at runtime by the command ncr53c400a= [HW,SCSI] See Documentation/scsi/g_NCR5380.txt. - ncr53c406a= [HW,SCSI] - ncr53c8xx= [HW,SCSI] osst= [HW,SCSI] SCSI Tape Driver @@ -108,9 +103,5 @@ parameters may be changed at runtime by the command st= [HW,SCSI] SCSI tape parameters (buffers, etc.) See Documentation/scsi/st.txt. - tmscsim= [HW,SCSI] - See comment before function dc390_setup() in - drivers/scsi/tmscsim.c. - wd33c93= [HW,SCSI] See header of drivers/scsi/wd33c93.c. diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt deleted file mode 100644 index 0e0322bf0020..000000000000 --- a/Documentation/scsi/tmscsim.txt +++ /dev/null @@ -1,443 +0,0 @@ -The tmscsim driver -================== - -1. Purpose and history -2. Installation -3. Features -4. Configuration via /proc/scsi/tmscsim/? -5. Configuration via boot/module params -6. Potential improvements -7. Bug reports, debugging and updates -8. Acknowledgements -9. Copyright - - -1. Purpose and history ----------------------- -The tmscsim driver supports PCI SCSI Host Adapters based on the AM53C974 -chip. AM53C974 based SCSI adapters include: - Tekram DC390, DC390T - Dawicontrol 2974 - QLogic Fast! PCI Basic - some on-board adapters -(This is most probably not a complete list) - -It has originally written by C.L. Huang from the Tekram corp. to support the -Tekram DC390(T) adapter. This is where the name comes from: tm = Tekram -scsi = SCSI driver, m = AMD (?) as opposed to w for the DC390W/U/F -(NCR53c8X5, X=2/7) driver. Yes, there was also a driver for the latter, -tmscsiw, which supported DC390W/U/F adapters. It's not maintained any more, -as the ncr53c8xx is perfectly supporting these adapters since some time. - -The driver first appeared in April 1996, exclusively supported the DC390 -and has been enhanced since then in various steps. In May 1998 support for -general AM53C974 based adapters and some possibilities to configure it were -added. The non-DC390 support works by assuming some values for the data -normally taken from the DC390 EEPROM. See below (chapter 5) for details. - -When using the DC390, the configuration is still be done using the DC390 -BIOS setup. The DC390 EEPROM is read and used by the driver, any boot or -module parameters (chapter 5) are ignored! However, you can change settings -dynamically, as described in chapter 4. - -For a more detailed description of the driver's history, see the first lines -of tmscsim.c. -The numbering scheme isn't consistent. The first versions went from 1.00 to -1.12, then 1.20a to 1.20t. Finally I decided to use the ncr53c8xx scheme. So -the next revisions will be 2.0a to 2.0X (stable), 2.1a to 2.1X (experimental), -2.2a to 2.2X (stable, again) etc. (X = anything between a and z.) If I send -fixes to people for testing, I create intermediate versions with a digit -appended, e.g. 2.0c3. - - -2. Installation ---------------- -If you got any recent kernel with this driver and document included in -linux/drivers/scsi, you basically have to do nothing special to use this -driver. Of course you have to choose to compile SCSI support and DC390(T) -support into your kernel or as module when configuring your kernel for -compiling. -NEW: You may as well compile this module outside your kernel, using the -supplied Makefile. - - If you got an old kernel (pre 2.1.127, pre 2.0.37p1) with an old version of - this driver: Get dc390-21125-20b.diff.gz or dc390-2036p21-20b1.diff.gz from - my web page and apply the patch. Apply further patches to upgrade to the - latest version of the driver. - - If you want to do it manually, you should copy the files (dc390.h, - tmscsim.h, tmscsim.c, scsiiom.c and README.tmscsim) from this directory to - linux/drivers/scsi. You have to recompile your kernel/module of course. - - You should apply the three patches included in dc390-120-kernel.diff - (Applying them: cd /usr/src; patch -p0 <~/dc390-120-kernel.diff) - The patches are against 2.1.125, so you might have to manually resolve - rejections when applying to another kernel version. - - The patches will update the kernel startup code to allow boot parameters to - be passed to the driver, update the Documentation and finally offer you the - possibility to omit the non-DC390 parts of the driver. - (By selecting "Omit support for non DC390" you basically disable the - emulation of a DC390 EEPROM for non DC390 adapters. This saves a few bytes - of memory.) - -If you got a very old kernel without the tmscsim driver (pre 2.0.31) -I recommend upgrading your kernel. However, if you don't want to, please -contact me to get the appropriate patches. - - -Upgrading a SCSI driver is always a delicate thing to do. The 2.0 driver has -proven stable on many systems, but it's still a good idea to take some -precautions. In an ideal world you would have a full backup of your disks. -The world isn't ideal and most people don't have full backups (me neither). -So take at least the following measures: -* make your kernel remount the FS read-only on detecting an error: - tune2fs -e remount-ro /dev/sd?? -* have copies of your SCSI disk's partition tables on some safe location: - dd if=/dev/sda of=/mnt/floppy/sda bs=512 count=1 - or just print it with: - fdisk -l | lpr -* make sure you are able to boot Linux (e.g. from floppy disk using InitRD) - if your SCSI disk gets corrupted. You can use - ftp://student.physik.uni-dortmund.de/pub/linux/kernel/bootdisk.gz - -One more warning: I used to overclock my PCI bus to 41.67 MHz. My Tekram -DC390F (Sym53c875) accepted this as well as my Millennium. But the Am53C974 -produced errors and started to corrupt my disks. So don't do that! A 37.50 -MHz PCI bus works for me, though, but I don't recommend using higher clocks -than the 33.33 MHz being in the PCI spec. - - -3.Features ----------- -- SCSI - * Tagged command queueing - * Sync speed up to 10 MHz - * Disconnection - * Multiple LUNs - -- General / Linux interface - * Support for up to 4 AM53C974 adapters. - * DC390 EEPROM usage or boot/module params - * Information via cat /proc/scsi/tmscsim/? - * Dynamically configurable by writing to /proc/scsi/tmscsim/? - * Dynamic allocation of resources - * SMP support: Locking on io_request lock (Linux 2.1/2.2) or adapter - specific locks (Linux 2.5?) - * Uniform source code for Linux-2.x.y - * Support for dyn. addition/removal of devices via add/remove-single-device - (Try: echo "scsi add-single-device C B T U" >/proc/scsi/scsi - C = Controller, B = Bus, T = Target SCSI ID, U = Unit SCSI LUN.) - Use with care! - * Try to use the partition table for the determination of the mapping - - -4. Configuration via /proc/scsi/tmscsim/? ------------------------------------------ -First of all look at the output of /proc/scsi/tmscsim/? by typing - cat /proc/scsi/tmscsim/? -The "?" should be replaced by the SCSI host number. (The shell might do this -for you.) -You will see some info regarding the adapter and, at the end, a listing of -the attached devices and their settings. - -Here's an example: -garloff@kurt:/home/garloff > cat /proc/scsi/tmscsim/0 -Tekram DC390/AM53C974 PCI SCSI Host Adapter, Driver Version 2.0e7 2000-11-28 -SCSI Host Nr 1, AM53C974 Adapter Nr 0 -IOPortBase 0xb000, IRQ 10 -MaxID 8, MaxLUN 8, AdapterID 6, SelTimeout 250 ms, DelayReset 1 s -TagMaxNum 16, Status 0x00, ACBFlag 0x00, GlitchEater 24 ns -Statistics: Cmnds 1470165, Cmnds not sent directly 0, Out of SRB conds 0 - Lost arbitrations 587, Sel. connected 0, Connected: No -Nr of attached devices: 4, Nr of DCBs: 4 -Map of attached LUNs: 01 00 00 03 01 00 00 00 -Idx ID LUN Prty Sync DsCn SndS TagQ NegoPeriod SyncSpeed SyncOffs MaxCmd -00 00 00 Yes Yes Yes Yes Yes 100 ns 10.0 M 15 16 -01 03 00 Yes Yes Yes Yes No 100 ns 10.0 M 15 01 -02 03 01 Yes Yes Yes Yes No 100 ns 10.0 M 15 01 -03 04 00 Yes Yes Yes Yes No 100 ns 10.0 M 15 01 - -Note that the settings MaxID and MaxLUN are not zero- but one-based, which -means that a setting MaxLUN=4, will result in the support of LUNs 0..3. This -is somehow inconvenient, but the way the mid-level SCSI code expects it to be. - -ACB and DCB are acronyms for Adapter Control Block and Device Control Block. -These are data structures of the driver containing information about the -adapter and the connected SCSI devices respectively. - -Idx is the device index (just a consecutive number for the driver), ID and -LUN are the SCSI ID and LUN, Prty means Parity checking, Sync synchronous -negotiation, DsCn Disconnection, SndS Send Start command on startup (not -used by the driver) and TagQ Tagged Command Queueing. NegoPeriod and -SyncSpeed are somehow redundant, because they are reciprocal values -(1 / 112 ns = 8.9 MHz). At least in theory. The driver is able to adjust the -NegoPeriod more accurate (4ns) than the SyncSpeed (1 / 25ns). I don't know -if certain devices will have problems with this discrepancy. Max. speed is -10 MHz corresp. to a min. NegoPeriod of 100 ns. -(The driver allows slightly higher speeds if the devices (Ultra SCSI) accept -it, but that's out of adapter spec, on your own risk and unlikely to improve -performance. You're likely to crash your disks.) -SyncOffs is the offset used for synchronous negotiations; max. is 15. -The last values are only shown, if Sync is enabled. (NegoPeriod is still -displayed in brackets to show the values which will be used after enabling -Sync.) -MaxCmd ist the number of commands (=tags) which can be processed at the same -time by the device. - -If you want to change a setting, you can do that by writing to -/proc/scsi/tmscsim/?. Basically you have to imitate the output of driver. -(Don't use the brackets for NegoPeriod on Sync disabled devices.) -You don't have to care about capitalisation. The driver will accept space, -tab, comma, = and : as separators. - -There are three kinds of changes: - -(1) Change driver settings: - You type the names of the parameters and the params following it. - Example: - echo "MaxLUN=8 seltimeout 200" >/proc/scsi/tmscsim/0 - - Note that you can only change MaxID, MaxLUN, AdapterID, SelTimeOut, - TagMaxNum, ACBFlag, GlitchEater and DelayReset. Don't change ACBFlag - unless you want to see what happens, if the driver hangs. - -(2) Change device settings: You write a config line to the driver. The Nr - must match the ID and LUN given. If you give "-" as parameter, it is - ignored and the corresponding setting won't be changed. - You can use "y" or "n" instead of "Yes" and "No" if you want to. - You don't need to specify a full line. The driver automatically performs - an INQUIRY on the device if necessary to check if it is capable to operate - with the given settings (Sync, TagQ). - Examples: - echo "0 0 0 y y y - y - 10 " >/proc/scsi/tmscsim/0 - echo "3 5 0 y n y " >/proc/scsi/tmscsim/0 - - To give a short explanation of the first example: - The first three numbers, "0 0 0" (Device index 0, SCSI ID 0, SCSI LUN 0), - select the device to which the following parameters apply. Note that it - would be sufficient to use the index or both SCSI ID and LUN, but I chose - to require all three to have a syntax similar to the output. - The following "y y y - y" enables Parity checking, enables Synchronous - transfers, Disconnection, leaves Send Start (not used) untouched and - enables Tagged Command Queueing for the selected device. The "-" skips - the Negotiation Period setting but the "10" sets the max sync. speed to - 10 MHz. It's useless to specify both NegoPeriod and SyncSpeed as - discussed above. The values used in this example will result in maximum - performance. - -(3) Special commands: You can force a SCSI bus reset, an INQUIRY command, the - removal or the addition of a device's DCB and a SCSI register dump. - This is only used for debugging when you meet problems. The parameter of - the INQUIRY and REMOVE commands is the device index as shown by the - output of /proc/scsi/tmscsim/? in the device listing in the first column - (Idx). ADD takes the SCSI ID and LUN. - Examples: - echo "reset" >/proc/scsi/tmscsim/0 - echo "inquiry 1" >/proc/scsi/tmscsim/0 - echo "remove 2" >/proc/scsi/tmscsim/1 - echo "add 2 3" >/proc/scsi/tmscsim/? - echo "dump" >/proc/scsi/tmscsim/0 - - Note that you will meet problems when you REMOVE a device's DCB with the - remove command if it contains partitions which are mounted. Only use it - after unmounting its partitions, telling the SCSI mid-level code to - remove it (scsi remove-single-device) and you really need a few bytes of - memory. - The ADD command allows you to configure a device before you tell the - mid-level code to try detection. - - -I'd suggest reviewing the output of /proc/scsi/tmscsim/? after changing -settings to see if everything changed as requested. - - -5. Configuration via boot/module parameters -------------------------------------------- -With the DC390, the driver reads its EEPROM settings and tries to use them. -But you may want to override the settings prior to being able to change the -driver configuration via /proc/scsi/tmscsim/?. -If you do have another AM53C974 based adapter, that's even the only -possibility to adjust settings before you are able to write to the -/proc/scsi/tmscsim/? pseudo-file, e.g. if you want to use another -adapter ID than 7. -(BTW, the log message "DC390: No EEPROM found!" is normal without a DC390.) -For this purpose, you can pass options to the driver before it is initialised -by using kernel or module parameters. See lilo(8) or modprobe(1) manual -pages on how to pass params to the kernel or a module. -[NOTE: Formerly, it was not possible to override the EEPROM supplied - settings of the DC390 with cmd line parameters. This has changed since - 2.0e7] - -The syntax of the params is much shorter than the syntax of the /proc/... -interface. This makes it a little bit more difficult to use. However, long -parameter lines have the risk to be misinterpreted and the length of kernel -parameters is limited. - -As the support for non-DC390 adapters works by simulating the values of the -DC390 EEPROM, the settings are given in a DC390 BIOS' way. - -Here's the syntax: -tmscsim=AdaptID,SpdIdx,DevMode,AdaptMode,TaggedCmnds,DelayReset - -Each of the parameters is a number, containing the described information: - -* AdaptID: The SCSI ID of the host adapter. Must be in the range 0..7 - Default is 7. - -* SpdIdx: The index of the maximum speed as in the DC390 BIOS. The values - 0..7 mean 10, 8.0, 6.7, 5.7, 5.0, 4.0, 3.1 and 2 MHz resp. Default is - 0 (10.0 MHz). - -* DevMode is a bit mapped value describing the per-device features. It - applies to all devices. (Sync, Disc and TagQ will only apply, if the - device supports it.) The meaning of the bits (* = default): - - Bit Val(hex) Val(dec) Meaning - *0 0x01 1 Parity check - *1 0x02 2 Synchronous Negotiation - *2 0x04 4 Disconnection - *3 0x08 8 Send Start command on startup. (Not used) - *4 0x10 16 Tagged Command Queueing - - As usual, the desired value is obtained by adding the wanted values. If - you want to enable all values, e.g., you would use 31(0x1f). Default is 31. - -* AdaptMode is a bit mapped value describing the enabled adapter features. - - Bit Val(hex) Val(dec) Meaning - *0 0x01 1 Support more than two drives. (Not used) - *1 0x02 2 Use DOS compatible mapping for HDs greater than 1GB. - *2 0x04 4 Reset SCSI Bus on startup. - *3 0x08 8 Active Negation: Improves SCSI Bus noise immunity. - 4 0x10 16 Immediate return on BIOS seek command. (Not used) - (*)5 0x20 32 Check for LUNs >= 1. - -* TaggedCmnds is a number indicating the maximum number of Tagged Commands. - It is the binary logarithm - 1 of the actual number. Max is 4 (32). - Value Number of Tagged Commands - 0 2 - 1 4 - 2 8 - *3 16 - 4 32 - -* DelayReset is the time in seconds (minus 0.5s), the adapter waits, after a - bus reset. Default is 1 (corresp. to 1.5s). - -Example: - modprobe tmscsim tmscsim=6,2,31 -would set the adapter ID to 6, max. speed to 6.7 MHz, enable all device -features and leave the adapter features, the number of Tagged Commands -and the Delay after a reset to the defaults. - -As you can see, you don't need to specify all of the six params. -If you want values to be ignored (i.e. the EEprom settings or the defaults -will be used), you may pass -2 (not 0!) at the corresponding position. - -The defaults (7,0,31,15,3,1) are aggressive to allow good performance. You -can use tmscsim=7,0,31,63,4,0 for maximum performance, if your SCSI chain -allows it. If you meet problems, you can use tmscsim=-1 which is a shortcut -for tmscsim=7,4,9,15,2,10. - - -6. Potential improvements -------------------------- -Most of the intended work on the driver has been done. Here are a few ideas -to further improve its usability: - -* Cleanly separate per-Target and per-LUN properties (DCB) -* More intelligent abort() routine -* Use new_eh code (Linux-2.1+) -* Have the mid-level (ML) code (and not the driver) handle more of the - various conditions. -* Command queueing in the driver: Eliminate Query list and use ML instead. -* More user friendly boot/module param syntax - -Further investigation on these problems: - -* Driver hangs with sync readcdda (xcdroast) (most probably VIA PCI error) - -Known problems: -Please see http://www.garloff.de/kurt/linux/dc390/problems.html - -* Changing the parameters of multi-lun by the tmscsim/? interface will - cause problems, cause these settings are mostly per Target and not per LUN - and should be updated accordingly. To be fixed for 2.0d24. -* CDRs (eg Yam CRW4416) not recognized, because some buggy devices don't - recover from a SCSI reset in time. Use a higher delay or don't issue - a SCSI bus reset on driver initialization. See problems page. - For the CRW4416S, this seems to be solved with firmware 1.0g (reported by - Jean-Yves Barbier). -* TEAC CD-532S not being recognized. (Works with 1.11). -* Scanners (eg. Astra UMAX 1220S) don't work: Disable Sync Negotiation. - If this does not help, try echo "INQUIRY t" >/proc/scsi/tmscsim/? (t - replaced by the dev index of your scanner). You may try to reset your SCSI - bus afterwards (echo "RESET" >/proc/scsi/tmscsim/?). - The problem seems to be solved as of 2.0d18, thanks to Andreas Rick. -* If there is a valid partition table, the driver will use it for determining - the mapping. If there's none, a reasonable mapping (Symbios-like) will be - assumed. Other operating systems may not like this mapping, though - it's consistent with the BIOS' behaviour. Old DC390 drivers ignored the - partition table and used a H/S = 64/32 or 255/63 translation. So if you - want to be compatible to those, use this old mapping when creating - partition tables. Even worse, on bootup the DC390 might complain if other - mappings are found, so auto rebooting may fail. -* In some situations, the driver will get stuck in an abort loop. This is a - bad interaction between the Mid-Layer of Linux' SCSI code and the driver. - Try to disable DsCn, if you meet this problem. Please contact me for - further debugging. - - -7. Bug reports, debugging and updates -------------------------------------- -Whenever you have problems with the driver, you are invited to ask the -author for help. However, I'd suggest reading the docs and trying to solve -the problem yourself, first. -If you find something, which you believe to be a bug, please report it to me. -Please append the output of /proc/scsi/scsi, /proc/scsi/tmscsim/? and -maybe the DC390 log messages to the report. - -Bug reports should be send to me (Kurt Garloff ) as well -as to the linux-scsi list (), as sometimes bugs -are caused by the SCSI mid-level code. - -I will ask you for some more details and probably I will also ask you to -enable some of the DEBUG options in the driver (tmscsim.c:DC390_DEBUGXXX -defines). The driver will produce some data for the syslog facility then. -Beware: If your syslog gets written to a SCSI disk connected to your -AM53C974, the logging might produce log output again, and you might end -having your box spending most of its time doing the logging. - -The latest version of the driver can be found at: - http://www.garloff.de/kurt/linux/dc390/ - ftp://ftp.suse.com/pub/people/garloff/linux/dc390/ - - -8. Acknowledgements -------------------- -Thanks to Linus Torvalds, Alan Cox, the FSF people, the XFree86 team and -all the others for the wonderful OS and software. -Thanks to C.L. Huang and Philip Giang (Tekram) for the initial driver -release and support. -Thanks to Doug Ledford, Gérard Roudier for support with SCSI coding. -Thanks to a lot of people (espec. Chiaki Ishikawa, Andreas Haumer, Hubert -Tonneau) for intensively testing the driver (and even risking data loss -doing this during early revisions). -Recently, SuSE GmbH, Nuernberg, FRG, has been paying me for the driver -development and maintenance. Special thanks! - - -9. Copyright ------------- - This driver is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; version 2 of the License. - If you want to use any later version of the GNU GPL, you will probably - be allowed to, but you have to ask me and Tekram - before. - -------------------------------------------------------------------------- -Written by Kurt Garloff 1998/06/11 -Last updated 2000/11/28, driver revision 2.0e7 -$Id: README.tmscsim,v 2.25.2.7 2000/12/20 01:07:12 garloff Exp $ -- cgit From 114c1aa210494a02c26aa33f793e5b641df01989 Mon Sep 17 00:00:00 2001 From: Stanislav Nijnikov Date: Thu, 1 Mar 2018 12:48:06 +0200 Subject: scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries Read from these files will return the integer value of the chosen power management level now. Separate entries were added to show the target UFS device and UIC link states. The description of the possible power managements levels was added to the ABI file. The on-write behaviour of these entries wasn't changed. [mkp: typo] Signed-off-by: Stanislav Nijnikov Acked-by: Adrian Hunter Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 67 ++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 07f1c2f8dbfc..83735f79e572 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -802,3 +802,70 @@ Description: This file shows the The amount of physical memory needed the particular logical unit. The full information about the attribute could be found at UFS specifications 2.1. The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl +Date: September 2014 +Contact: Subhash Jadavani +Description: This entry could be used to set or show the UFS device + runtime power management level. The current driver + implementation supports 6 levels with next target states: + 0 - an UFS device will stay active, an UIC link will + stay active + 1 - an UFS device will stay active, an UIC link will + hibernate + 2 - an UFS device will moved to sleep, an UIC link will + stay active + 3 - an UFS device will moved to sleep, an UIC link will + hibernate + 4 - an UFS device will be powered off, an UIC link will + hibernate + 5 - an UFS device will be powered off, an UIC link will + be powered off + +What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state +Date: February 2018 +Contact: Subhash Jadavani +Description: This entry shows the target power mode of an UFS device + for the chosen runtime power management level. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state +Date: February 2018 +Contact: Subhash Jadavani +Description: This entry shows the target state of an UFS UIC link + for the chosen runtime power management level. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl +Date: September 2014 +Contact: Subhash Jadavani +Description: This entry could be used to set or show the UFS device + system power management level. The current driver + implementation supports 6 levels with next target states: + 0 - an UFS device will stay active, an UIC link will + stay active + 1 - an UFS device will stay active, an UIC link will + hibernate + 2 - an UFS device will moved to sleep, an UIC link will + stay active + 3 - an UFS device will moved to sleep, an UIC link will + hibernate + 4 - an UFS device will be powered off, an UIC link will + hibernate + 5 - an UFS device will be powered off, an UIC link will + be powered off + +What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state +Date: February 2018 +Contact: Subhash Jadavani +Description: This entry shows the target power mode of an UFS device + for the chosen system power management level. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state +Date: February 2018 +Contact: Subhash Jadavani +Description: This entry shows the target state of an UFS UIC link + for the chosen system power management level. + The file is read only. -- cgit From ad448378825f5746c5fa37718724bc8f4e7b6945 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 20 Mar 2018 15:07:38 +0200 Subject: scsi: ufs: Add support for Auto-Hibernate Idle Timer UFS host controllers may support an autonomous power management feature called the Auto-Hibernate Idle Timer. The timer is set to the number of microseconds of idle time before the UFS host controller will autonomously put the link into Hibernate state. That will save power at the expense of increased latency. Any access to the host controller interface registers will automatically put the link out of Hibernate state. So once configured, the feature is transparent to the driver. Expose the Auto-Hibernate Idle Timer value via SysFS to allow users to choose between power efficiency or lower latency. Set a default value of 150 ms. Signed-off-by: Adrian Hunter Acked-by: Stanislav Nijnikov Signed-off-by: Martin K. Petersen --- Documentation/ABI/testing/sysfs-driver-ufs | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 83735f79e572..016724ec26d5 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -1,3 +1,17 @@ +What: /sys/bus/*/drivers/ufshcd/*/auto_hibern8 +Date: March 2018 +Contact: linux-scsi@vger.kernel.org +Description: + This file contains the auto-hibernate idle timer setting of a + UFS host controller. A value of '0' means auto-hibernate is not + enabled. Otherwise the value is the number of microseconds of + idle time before the UFS host controller will autonomously put + the link into hibernate state. That will save power at the + expense of increased latency. Note that the hardware supports + 10-bit values with a power-of-ten multiplier which allows a + maximum value of 102300000. Refer to the UFS Host Controller + Interface specification for more details. + What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type Date: February 2018 Contact: Stanislav Nijnikov -- cgit