From 0dde4b573eee57799a6b07bc46705377deb0bc00 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 28 Mar 2018 02:14:22 +0000 Subject: ASoC: doc: replace codec to component Now we can replace Codec to Component. Let's do it. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- Documentation/sound/soc/codec.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/soc/codec.rst b/Documentation/sound/soc/codec.rst index f87612b94812..58f625fe3d39 100644 --- a/Documentation/sound/soc/codec.rst +++ b/Documentation/sound/soc/codec.rst @@ -179,12 +179,12 @@ i.e. static int wm8974_mute(struct snd_soc_dai *dai, int mute) { - struct snd_soc_codec *codec = dai->codec; - u16 mute_reg = snd_soc_read(codec, WM8974_DAC) & 0xffbf; + struct snd_soc_component *component = dai->component; + u16 mute_reg = snd_soc_component_read32(component, WM8974_DAC) & 0xffbf; if (mute) - snd_soc_write(codec, WM8974_DAC, mute_reg | 0x40); + snd_soc_component_write(component, WM8974_DAC, mute_reg | 0x40); else - snd_soc_write(codec, WM8974_DAC, mute_reg); + snd_soc_component_write(component, WM8974_DAC, mute_reg); return 0; } -- cgit From aa0f18d762215163af12797b74baf014577668c2 Mon Sep 17 00:00:00 2001 From: Steven Eckhoff Date: Wed, 4 Apr 2018 16:49:52 -0500 Subject: ASoC: TSCS42xx: Add CCF support to get sysclk The TSCS42xx relies on set_sysclk to get a unique clock id and rate, which prevents it from being used with the simple-card. Remove set_sysclk callback Add CCF support to get clock id and rate Add clocks and clock-names to device tree binding Signed-off-by: Steven Eckhoff Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/tscs42xx.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/tscs42xx.txt b/Documentation/devicetree/bindings/sound/tscs42xx.txt index 2ac2f0996697..7eea32e9d078 100644 --- a/Documentation/devicetree/bindings/sound/tscs42xx.txt +++ b/Documentation/devicetree/bindings/sound/tscs42xx.txt @@ -8,9 +8,15 @@ Required Properties: - reg : <0x71> for analog mic <0x69> for digital mic + - clock-names: Must one of the following "mclk1", "xtal", "mclk2" + + - clocks: phandle of the clock that provides the codec sysclk + Example: wookie: codec@69 { compatible = "tempo,tscs42A2"; reg = <0x69>; + clock-names = "xtal"; + clocks = <&audio_xtal>; }; -- cgit From d59fb2856223219ccaa73bd2e96021f02ea5c266 Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Thu, 22 Mar 2018 14:12:33 +0800 Subject: ASoC: rt5668: add rt5668B codec driver This is the initial codec driver for rt5668b. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rt5668.txt | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rt5668.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/rt5668.txt b/Documentation/devicetree/bindings/sound/rt5668.txt new file mode 100644 index 000000000000..c88b96e7764b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt5668.txt @@ -0,0 +1,50 @@ +RT5668B audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt5668b" + +- reg : The I2C address of the device. + +Optional properties: + +- interrupts : The CODEC's interrupt output. + +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using GPIO2 pin as dmic1 data pin + 2: using GPIO5 pin as dmic1 data pin + +- realtek,dmic1-clk-pin + 0: using GPIO1 pin as dmic1 clock pin + 1: using GPIO3 pin as dmic1 clock pin + +- realtek,jd-src + 0: No JD is used + 1: using JD1 as JD source + +- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. + +Pins on the device (for linking into audio routes) for RT5668B: + + * DMIC L1 + * DMIC R1 + * IN1P + * HPOL + * HPOR + +Example: + +rt5668 { + compatible = "realtek,rt5668b"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = ; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; +}; -- cgit From 22d9f80904b4510296c133db15f8d3291292023b Mon Sep 17 00:00:00 2001 From: Kai Chieh Chuang Date: Wed, 25 Apr 2018 15:25:22 +0800 Subject: ASoC: mediatek: add documents for mt6797 Signed-off-by: KaiChieh Chuang Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/mt6797-afe-pcm.txt | 42 ++++++++++++++++++++++ .../devicetree/bindings/sound/mt6797-mt6351.txt | 14 ++++++++ 2 files changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mt6797-afe-pcm.txt create mode 100644 Documentation/devicetree/bindings/sound/mt6797-mt6351.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/mt6797-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt6797-afe-pcm.txt new file mode 100644 index 000000000000..0ae29de15bfd --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt6797-afe-pcm.txt @@ -0,0 +1,42 @@ +Mediatek AFE PCM controller for mt6797 + +Required properties: +- compatible = "mediatek,mt6797-audio"; +- reg: register location and size +- interrupts: should contain AFE interrupt +- power-domains: should define the power domain +- clocks: Must contain an entry for each entry in clock-names +- clock-names: should have these clock names: + "infra_sys_audio_clk", + "infra_sys_audio_26m", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_aud_intbus", + "top_sys_pll3_d4", + "top_sys_pll1_d4", + "top_clk26m_clk"; + +Example: + + afe: mt6797-afe-pcm@11220000 { + compatible = "mediatek,mt6797-audio"; + reg = <0 0x11220000 0 0x1000>; + interrupts = ; + power-domains = <&scpsys MT6797_POWER_DOMAIN_AUDIO>; + clocks = <&infrasys CLK_INFRA_AUDIO>, + <&infrasys CLK_INFRA_AUDIO_26M>, + <&infrasys CLK_INFRA_AUDIO_26M_PAD_TOP>, + <&topckgen CLK_TOP_MUX_AUDIO>, + <&topckgen CLK_TOP_MUX_AUD_INTBUS>, + <&topckgen CLK_TOP_SYSPLL3_D4>, + <&topckgen CLK_TOP_SYSPLL1_D4>, + <&clk26m>; + clock-names = "infra_sys_audio_clk", + "infra_sys_audio_26m", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_aud_intbus", + "top_sys_pll3_d4", + "top_sys_pll1_d4", + "top_clk26m_clk"; + }; diff --git a/Documentation/devicetree/bindings/sound/mt6797-mt6351.txt b/Documentation/devicetree/bindings/sound/mt6797-mt6351.txt new file mode 100644 index 000000000000..1d95a8840f19 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt6797-mt6351.txt @@ -0,0 +1,14 @@ +MT6797 with MT6351 CODEC + +Required properties: +- compatible: "mediatek,mt6797-mt6351-sound" +- mediatek,platform: the phandle of MT6797 ASoC platform +- mediatek,audio-codec: the phandles of MT6351 codec + +Example: + + sound { + compatible = "mediatek,mt6797-mt6351-sound"; + mediatek,audio-codec = <&mt6351_snd>; + mediatek,platform = <&afe>; + }; -- cgit From a74d51ba0e17ec9b6c4cc32cbf06eac32747fda2 Mon Sep 17 00:00:00 2001 From: Kai Chieh Chuang Date: Thu, 26 Apr 2018 10:41:44 +0800 Subject: ASoC: add mt6351 codec driver This patch adds the MediaTek MT6351 codec driver. MT6351 communicate with SoC through MediaTek PMIC wrapper. MT6351 use MediaTek proprietary audio interface. Signed-off-by: KaiChieh Chuang Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/mt6351.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mt6351.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/mt6351.txt b/Documentation/devicetree/bindings/sound/mt6351.txt new file mode 100644 index 000000000000..7fb2cb99245e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt6351.txt @@ -0,0 +1,16 @@ +Mediatek MT6351 Audio Codec + +The communication between MT6351 and SoC is through Mediatek PMIC wrapper. +For more detail, please visit Mediatek PMIC wrapper documentation. + +Must be a child node of PMIC wrapper. + +Required properties: + +- compatible : "mediatek,mt6351-sound". + +Example: + +mt6351_snd { + compatible = "mediatek,mt6351-sound"; +}; -- cgit From eaeb4194de9c843742f421daa858f27e7c89a625 Mon Sep 17 00:00:00 2001 From: Ryder Lee Date: Wed, 25 Apr 2018 12:19:58 +0800 Subject: ASoC: mediatek: add MT7622 AFE compatible in documentation Add support for MT7622 AFE which shares the same binding with MT2701. Cc: devicetree@vger.kernel.org Signed-off-by: Ryder Lee Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt index e2f7f4951215..560762e0a168 100644 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -1,7 +1,9 @@ Mediatek AFE PCM controller for mt2701 Required properties: -- compatible = "mediatek,mt2701-audio"; +- compatible: should be one of the followings. + - "mediatek,mt2701-audio" + - "mediatek,mt7622-audio" - interrupts: should contain AFE and ASYS interrupts - interrupt-names: should be "afe" and "asys" - power-domains: should define the power domain -- cgit From e3976aa6fb409aea3cea812f6a0beebb545e5996 Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Fri, 27 Apr 2018 15:55:47 +0200 Subject: ASoC: tas6424: Add support for the standby pin The standby pin can be connected to a GPIO. In that case we have to drive it to the correct values for the TAS6424 to operate properly. Signed-off-by: Jean-Jacques Hiblot Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/ti,tas6424.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/ti,tas6424.txt b/Documentation/devicetree/bindings/sound/ti,tas6424.txt index 1c4ada0eef4e..df71e414dc5b 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas6424.txt +++ b/Documentation/devicetree/bindings/sound/ti,tas6424.txt @@ -6,6 +6,7 @@ Required properties: - compatible: "ti,tas6424" - TAS6424 - reg: I2C slave address - sound-dai-cells: must be equal to 0 + - standby-gpios: GPIO used to shut the TAS6424 down. Example: -- cgit From e969a6d222c9da87c6b5978674788faf5c58a07d Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Fri, 27 Apr 2018 15:55:48 +0200 Subject: ASoC: tas6424: Add support for the mute pin mute can be connected to GPIO. In that case we have to drive it to the correct value Signed-off-by: Jean-Jacques Hiblot Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/ti,tas6424.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/ti,tas6424.txt b/Documentation/devicetree/bindings/sound/ti,tas6424.txt index df71e414dc5b..eacb54f34188 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas6424.txt +++ b/Documentation/devicetree/bindings/sound/ti,tas6424.txt @@ -7,6 +7,7 @@ Required properties: - reg: I2C slave address - sound-dai-cells: must be equal to 0 - standby-gpios: GPIO used to shut the TAS6424 down. + - mute-gpios: GPIO used to mute all the outputs Example: -- cgit From f59094e0373768a0c762ff0958879b12ad8beb82 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 4 May 2018 16:12:00 -0300 Subject: ASoC: sgtl5000: Make the node name generic According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the binding example. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/sgtl5000.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 9a36c7e2a143..0f214457476f 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -39,7 +39,7 @@ VDDIO 1.8V 2.5V 3.3V Example: -codec: sgtl5000@a { +sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; #sound-dai-cells = <0>; -- cgit From d2b4d003239ec8b2c48900b777130aaa6e9caed4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 4 May 2018 16:12:01 -0300 Subject: ASoC: wm8962: Make the node name generic According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the binding example. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/wm8962.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/wm8962.txt b/Documentation/devicetree/bindings/sound/wm8962.txt index 7f82b59ec8f9..dcfa9a3369fd 100644 --- a/Documentation/devicetree/bindings/sound/wm8962.txt +++ b/Documentation/devicetree/bindings/sound/wm8962.txt @@ -24,7 +24,7 @@ Optional properties: Example: -codec: wm8962@1a { +wm8962: codec@1a { compatible = "wlf,wm8962"; reg = <0x1a>; -- cgit From 1dbec1f0f086bbcf811f34cf56af6ff749d10b59 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 4 May 2018 16:12:02 -0300 Subject: ASoC: wm8960: Make the node name generic According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the binding example. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/wm8960.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/wm8960.txt b/Documentation/devicetree/bindings/sound/wm8960.txt index 2deb8a3da9c5..6d29ac3750ee 100644 --- a/Documentation/devicetree/bindings/sound/wm8960.txt +++ b/Documentation/devicetree/bindings/sound/wm8960.txt @@ -23,7 +23,7 @@ Optional properties: Example: -codec: wm8960@1a { +wm8960: codec@1a { compatible = "wlf,wm8960"; reg = <0x1a>; -- cgit From 6a8f1a282348a47bcbb6c5418a86d271d1fb0ad2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 4 May 2018 16:12:03 -0300 Subject: ASoC: cs42xx8: Make the node name generic According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the binding example. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/cs42xx8.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/cs42xx8.txt b/Documentation/devicetree/bindings/sound/cs42xx8.txt index f631fbca6284..8619a156d038 100644 --- a/Documentation/devicetree/bindings/sound/cs42xx8.txt +++ b/Documentation/devicetree/bindings/sound/cs42xx8.txt @@ -16,7 +16,7 @@ Required properties: Example: -codec: cs42888@48 { +cs42888: codec@48 { compatible = "cirrus,cs42888"; reg = <0x48>; clocks = <&codec_mclk 0>; -- cgit From d9f29e9ebe6ec7193c160ac3d38d5d1d6b55adda Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 8 May 2018 03:21:24 +0000 Subject: ASoC: convert platform explanation to component commit ef050bece1b55 ("ASoC: Remove platform code now everything is componentised") removed platform code, but it didn't care about platform documentation. This patch convert platform explanation to component Signed-off-by: Kuninori Morimoto Reviewed-by: Charles Keepax Signed-off-by: Mark Brown --- Documentation/sound/soc/platform.rst | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/soc/platform.rst b/Documentation/sound/soc/platform.rst index d5574904d981..cc817078daa6 100644 --- a/Documentation/sound/soc/platform.rst +++ b/Documentation/sound/soc/platform.rst @@ -23,30 +23,26 @@ The platform DMA driver optionally supports the following ALSA operations:- }; The platform driver exports its DMA functionality via struct -snd_soc_platform_driver:- +snd_soc_component_driver:- :: - struct snd_soc_platform_driver { - char *name; + struct snd_soc_component_driver { + const char *name; - int (*probe)(struct platform_device *pdev); - int (*remove)(struct platform_device *pdev); - int (*suspend)(struct platform_device *pdev, struct snd_soc_cpu_dai *cpu_dai); - int (*resume)(struct platform_device *pdev, struct snd_soc_cpu_dai *cpu_dai); + ... + int (*probe)(struct snd_soc_component *); + void (*remove)(struct snd_soc_component *); + int (*suspend)(struct snd_soc_component *); + int (*resume)(struct snd_soc_component *); /* pcm creation and destruction */ - int (*pcm_new)(struct snd_card *, struct snd_soc_codec_dai *, struct snd_pcm *); + int (*pcm_new)(struct snd_soc_pcm_runtime *); void (*pcm_free)(struct snd_pcm *); - /* - * For platform caused delay reporting. - * Optional. - */ - snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *, - struct snd_soc_dai *); - - /* platform stream ops */ - struct snd_pcm_ops *pcm_ops; + ... + const struct snd_pcm_ops *ops; + const struct snd_compr_ops *compr_ops; + ... }; Please refer to the ALSA driver documentation for details of audio DMA. -- cgit From e9e7a3bdcdf41efe9137dcf225b021e0b6fd2dc3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 8 May 2018 17:35:47 +0200 Subject: ASoC: rt5640: Add devicetree-bindings for dmic, jack-detect Add devicetree-bindings for the dmic, jack-detect source and overcurrent- detect threshold settings. The dmic bindings mirror the existing bindings for the rt5645. The jd-src and ovcd bindings mirror the existing bindings for the rt5651. Cc devicetree@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rt5640.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt index 57fe64643050..e40e4893eed8 100644 --- a/Documentation/devicetree/bindings/sound/rt5640.txt +++ b/Documentation/devicetree/bindings/sound/rt5640.txt @@ -22,6 +22,41 @@ Optional properties: - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using IN1P pin as dmic1 data pin + 2: using GPIO3 pin as dmic1 data pin + +- realtek,dmic2-data-pin + 0: dmic2 is not used + 1: using IN1N pin as dmic2 data pin + 2: using GPIO4 pin as dmic2 data pin + +- realtek,jack-detect-source + u32. Valid values: + 0: jack-detect is not used + 1: Use GPIO1 for jack-detect + 2: Use JD1_IN4P for jack-detect + 3: Use JD2_IN4N for jack-detect + 4: Use GPIO2 for jack-detect + 5: Use GPIO3 for jack-detect + 6: Use GPIO4 for jack-detect + +- realtek,jack-detect-not-inverted + bool. Normal jack-detect switches give an inverted signal, set this bool + in the rare case you've a jack-detect switch which is not inverted. + +- realtek,over-current-threshold-microamp + u32, micbias over-current detection threshold in µA, valid values are + 600, 1500 and 2000µA. + +- realtek,over-current-scale-factor + u32, micbias over-current detection scale-factor, valid values are: + 0: Scale current by 0.5 + 1: Scale current by 0.75 + 2: Scale current by 1.0 + 3: Scale current by 1.5 + Pins on the device (for linking into audio routes) for RT5639/RT5640: * DMIC1 -- cgit From 8675e8d3d1b413dc0e6165d2ce09de4335f7f57a Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 9 May 2018 13:56:12 +0100 Subject: soc: qcom dt-bindings: Add APR bus bindings This patch add dt bindings for Qualcomm APR (Asynchronous Packet Router) bus driver. This bus is used for communicating with DSP which provides audio and various other services to cpu. Signed-off-by: Srinivas Kandagatla Reviewed-by: Rob Herring Reviewed-by: Bjorn Andersson Reviewed-by: Banajit Goswami Signed-off-by: Mark Brown --- .../devicetree/bindings/soc/qcom/qcom,apr.txt | 84 ++++++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt new file mode 100644 index 000000000000..bcc612cc7423 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt @@ -0,0 +1,84 @@ +Qualcomm APR (Asynchronous Packet Router) binding + +This binding describes the Qualcomm APR. APR is a IPC protocol for +communication between Application processor and QDSP. APR is mainly +used for audio/voice services on the QDSP. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,apr-v", example "qcom,apr-v2" + +- reg + Usage: required + Value type: + Definition: Destination processor ID. + Possible values are : + 1 - APR simulator + 2 - PC + 3 - MODEM + 4 - ADSP + 5 - APPS + 6 - MODEM2 + 7 - APPS2 + += APR SERVICES +Each subnode of the APR node represents service tied to this apr. The name +of the nodes are not important. The properties of these nodes are defined +by the individual bindings for the specific service +- All APR services MUST contain the following property: + +- reg + Usage: required + Value type: + Definition: APR Service ID + Possible values are : + 3 - DSP Core Service + 4 - Audio Front End Service. + 5 - Voice Stream Manager Service. + 6 - Voice processing manager. + 7 - Audio Stream Manager Service. + 8 - Audio Device Manager Service. + 9 - Multimode voice manager. + 10 - Core voice stream. + 11 - Core voice processor. + 12 - Ultrasound stream manager. + 13 - Listen stream manager. + += EXAMPLE +The following example represents a QDSP based sound card on a MSM8996 device +which uses apr as communication between Apps and QDSP. + + apr@4 { + compatible = "qcom,apr-v2"; + reg = ; + + q6core@3 { + compatible = "qcom,q6core"; + reg = ; + }; + + q6afe@4 { + compatible = "qcom,q6afe"; + reg = ; + + dais { + #sound-dai-cells = <1>; + hdmi@1 { + reg = <1>; + }; + }; + }; + + q6asm@7 { + compatible = "qcom,q6asm"; + reg = ; + ... + }; + + q6adm@8 { + compatible = "qcom,q6adm"; + reg = ; + ... + }; + }; -- cgit From 8c943ef123669b0c4100d69039326696c1662d60 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 9 May 2018 13:56:14 +0100 Subject: ASoC: qdsp6: dt-bindings: Add q6core dt bindings This patch add DT bindings for Q6CORE DSP module. Signed-off-by: Srinivas Kandagatla Reviewed-and-tested-by: Rohit kumar Reviewed-by: Rob Herring Reviewed-by: Banajit Goswami Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/qcom,q6core.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6core.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt new file mode 100644 index 000000000000..7f36ff8bec18 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt @@ -0,0 +1,21 @@ +Qualcomm ADSP Core service binding + +Q6CORE is one of the APR audio service on Q6DSP. +Please refer to qcom,apr.txt for details of the common apr service bindings +used by the apr service device. + +- but must contain the following property: + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,q6core-v.". + Or "qcom,q6core" where the version number can be queried + from DSP. + example "qcom,q6core-v2.0" + += EXAMPLE +q6core@3 { + compatible = "qcom,q6core"; + reg = ; +}; -- cgit From 6ad2ef6530bcb9ab838975c1587c527bed422fbe Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 9 May 2018 13:56:15 +0100 Subject: ASoC: qdsp6: dt-bindings: Add q6afe dt bindings This patch add DT bindings for AFE (Audio Frontend) DSP module. Signed-off-by: Srinivas Kandagatla Reviewed-and-tested-by: Rohit kumar Reviewed-by: Rob Herring Reviewed-by: Banajit Goswami Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/qcom,q6afe.txt | 104 +++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6afe.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt new file mode 100644 index 000000000000..14335a08b963 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt @@ -0,0 +1,104 @@ +Qualcomm Audio Front End (Q6AFE) binding + +AFE is one of the APR audio service on Q6DSP +Please refer to qcom,apr.txt for details of the common apr service bindings +used by all apr services. Must contain the following properties. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,q6afe-v." + Or "qcom,q6afe" where the version number can be queried + from DSP. + example "qcom,q6afe" + += AFE DAIs (Digial Audio Interface) +"dais" subnode of the AFE node. It represents afe dais, each afe dai is a +subnode of "dais" representing board specific dai setup. +"dais" node should have following properties followed by dai children. + +- #sound-dai-cells + Usage: required + Value type: + Definition: Must be 1 + +- #address-cells + Usage: required + Value type: + Definition: Must be 1 + +- #size-cells + Usage: required + Value type: + Definition: Must be 0 + +== AFE DAI is subnode of "dais" and represent a dai, it includes board specific +configuration of each dai. Must contain the following properties. + +- reg + Usage: required + Value type: + Definition: Must be dai id + +- qcom,sd-lines + Usage: required for mi2s interface + Value type: + Definition: Must be list of serial data lines used by this dai. + should be one or more of the 1-4 sd lines. + += EXAMPLE + +q6afe@4 { + compatible = "qcom,q6afe"; + reg = ; + + dais { + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + hdmi@1 { + reg = <1>; + }; + + prim-mi2s-rx@16 { + reg = <16>; + qcom,sd-lines = <1 3>; + }; + + prim-mi2s-tx@17 { + reg = <17>; + qcom,sd-lines = <2>; + }; + + sec-mi2s-rx@18 { + reg = <18>; + qcom,sd-lines = <1 4>; + }; + + sec-mi2s-tx@19 { + reg = <19>; + qcom,sd-lines = <2>; + }; + + tert-mi2s-rx@20 { + reg = <20>; + qcom,sd-lines = <2 4>; + }; + + tert-mi2s-tx@21 { + reg = <21>; + qcom,sd-lines = <1>; + }; + + quat-mi2s-rx@22 { + reg = <22>; + qcom,sd-lines = <1>; + }; + + quat-mi2s-tx@23 { + reg = <23>; + qcom,sd-lines = <2>; + }; + }; +}; -- cgit From 364b8768182abc40603dca05cbe2bea0a0a851a0 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 9 May 2018 13:56:16 +0100 Subject: ASoC: qdsp6: dt-bindings: Add q6adm dt bindings This patch add DT bindings for ADM (Audio Device Manager) DSP module. This module implements mixer controls to setup the connections between AFE ports and ASM streams. Signed-off-by: Srinivas Kandagatla Reviewed-and-tested-by: Rohit kumar Reviewed-by: Rob Herring Reviewed-by: Banajit Goswami Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/qcom,q6adm.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6adm.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt new file mode 100644 index 000000000000..cb709e5dbc44 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt @@ -0,0 +1,33 @@ +Qualcomm Audio Device Manager (Q6ADM) binding + +Q6ADM is one of the APR audio service on Q6DSP. +Please refer to qcom,apr.txt for details of the coommon apr service bindings +used by the apr service device. + +- but must contain the following property: + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,q6adm-v.". + Or "qcom,q6adm" where the version number can be queried + from DSP. + example "qcom,q6adm-v2.0" + + += ADM routing +"routing" subnode of the ADM node represents adm routing specific configuration + +- #sound-dai-cells + Usage: required + Value type: + Definition: Must be 0 + += EXAMPLE +q6adm@8 { + compatible = "qcom,q6adm"; + reg = ; + q6routing: routing { + #sound-dai-cells = <0>; + }; +}; -- cgit From 0e17e9820319c012c80ebba0a6df07d6a3a03ab3 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 9 May 2018 13:56:17 +0100 Subject: ASoC: qdsp6: dt-bindings: Add q6asm dt bindings This patch add DT bindings for ASM (Audio Stream Manager) DSP module. Signed-off-by: Srinivas Kandagatla Reviewed-and-tested-by: Rohit kumar Reviewed-by: Rob Herring Reviewed-by: Banajit Goswami Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/qcom,q6asm.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6asm.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt new file mode 100644 index 000000000000..2178eb91146f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt @@ -0,0 +1,33 @@ +Qualcomm Audio Stream Manager (Q6ASM) binding + +Q6ASM is one of the APR audio service on Q6DSP. +Please refer to qcom,apr.txt for details of the common apr service bindings +used by the apr service device. + +- but must contain the following property: + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,q6asm-v.". + Or "qcom,q6asm" where the version number can be queried + from DSP. + example "qcom,q6asm-v2.0" + += ASM DAIs (Digial Audio Interface) +"dais" subnode of the ASM node represents dai specific configuration + +- #sound-dai-cells + Usage: required + Value type: + Definition: Must be 1 + += EXAMPLE + +q6asm@7 { + compatible = "qcom,q6asm"; + reg = ; + q6asmdai: dais { + #sound-dai-cells = <1>; + }; +}; -- cgit From 74f24d8728ef12276d58e3d73283cc1d76db7507 Mon Sep 17 00:00:00 2001 From: Marco Felsch Date: Thu, 17 May 2018 15:55:18 +0200 Subject: ASoC: ssm2305: Add amplifier driver The ssm2305 is a simple Class-D audio amplifier. A application can turn on/off the device by a gpio. It's also possible to hardwire the shutdown pin. Tested on a i.MX6 based custom board. Signed-off-by: Marco Felsch Reviewed-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/adi,ssm2305.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/adi,ssm2305.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2305.txt b/Documentation/devicetree/bindings/sound/adi,ssm2305.txt new file mode 100644 index 000000000000..a9c9d83c8a30 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,ssm2305.txt @@ -0,0 +1,14 @@ +Analog Devices SSM2305 Speaker Amplifier +======================================== + +Required properties: + - compatible : "adi,ssm2305" + - shutdown-gpios : The gpio connected to the shutdown pin. + The gpio signal is ACTIVE_LOW. + +Example: + +ssm2305: analog-amplifier { + compatible = "adi,ssm2305"; + shutdown-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; +}; -- cgit From 9ff3036a60837b6ee0b7f70180f39ac29deb8cc2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 19 May 2018 22:12:52 -0300 Subject: ASoC: fsl: Mark 'big-endian' property as optional Currently the 'big-endian' property is listed as required, which is not correct. i.MX SoCs do not need such property, so move it under 'Optional properties' entry instead. Also, fsl-sai.txt incorrectly referenced 'FTM_PWM registers', so change it to 'SAI registers', which is the intended description. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/fsl,asrc.txt | 10 ++++++---- Documentation/devicetree/bindings/sound/fsl,esai.txt | 2 ++ Documentation/devicetree/bindings/sound/fsl,spdif.txt | 2 ++ Documentation/devicetree/bindings/sound/fsl-sai.txt | 8 +++++--- 4 files changed, 15 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt index f5a14115b459..1d4d9f938689 100644 --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt @@ -31,14 +31,16 @@ Required properties: it. This property is optional depending on the SoC design. - - big-endian : If this property is absent, the little endian mode - will be in use as default. Otherwise, the big endian - mode will be in use for all the device registers. - - fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends. - fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends. +Optional properties: + + - big-endian : If this property is absent, the little endian mode + will be in use as default. Otherwise, the big endian + mode will be in use for all the device registers. + Example: asrc: asrc@2034000 { diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index cacd18bb9ba6..5b9914367610 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -42,6 +42,8 @@ Required properties: means all the settings for Receiving would be duplicated from Transmition related registers. +Optional properties: + - big-endian : If this property is absent, the native endian mode will be in use as default, or the big endian mode will be in use for all the device registers. diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt index 38cfa7573441..8b324f82a782 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -33,6 +33,8 @@ Required properties: it. This property is optional depending on the SoC design. +Optional properties: + - big-endian : If this property is absent, the native endian mode will be in use as default, or the big endian mode will be in use for all the device registers. diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 740b467adf7d..dd9e59738e08 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -28,9 +28,6 @@ Required properties: pinctrl-names. See ../pinctrl/pinctrl-bindings.txt for details of the property values. - - big-endian : Boolean property, required if all the FTM_PWM - registers are big-endian rather than little-endian. - - lsb-first : Configures whether the LSB or the MSB is transmitted first for the fifo data. If this property is absent, the MSB is transmitted first as default, or the LSB @@ -48,6 +45,11 @@ Required properties: receive data by following their own bit clocks and frame sync clocks separately. +Optional properties: + + - big-endian : Boolean property, required if all the SAI + registers are big-endian rather than little-endian. + Optional properties (for mx6ul): - fsl,sai-mclk-direction-output: This is a boolean property. If present, -- cgit From be64027d18b163b971756af18d520cde6d21bb9f Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 May 2018 13:56:09 +0100 Subject: ASoC: qdsp6: dt-bindings: Add apq8096 machine bindings Add devicetree bindings documentation file for Qualcomm apq8096 sound card. Signed-off-by: Srinivas Kandagatla Reviewed-by: Rob Herring Reviewed-by: Banajit Goswami Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/qcom,apq8096.txt | 109 +++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8096.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt new file mode 100644 index 000000000000..aa54e49fc8a2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt @@ -0,0 +1,109 @@ +* Qualcomm Technologies APQ8096 ASoC sound card driver + +This binding describes the APQ8096 sound card, which uses qdsp for audio. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,apq8096-sndcard" + +- qcom,audio-routing: + Usage: Optional + Value type: + Definition: A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names could be power supplies, MicBias + of codec and the jacks on the board: + Valid names include: + + Board Connectors: + "Headphone Left" + "Headphone Right" + "Earphone" + "Line Out1" + "Line Out2" + "Line Out3" + "Line Out4" + "Analog Mic1" + "Analog Mic2" + "Analog Mic3" + "Analog Mic4" + "Analog Mic5" + "Analog Mic6" + "Digital Mic2" + "Digital Mic3" + + Audio pins and MicBias on WCD9335 Codec: + "MIC_BIAS1 + "MIC_BIAS2" + "MIC_BIAS3" + "MIC_BIAS4" + "AMIC1" + "AMIC2" + "AMIC3" + "AMIC4" + "AMIC5" + "AMIC6" + "AMIC6" + "DMIC1" + "DMIC2" + "DMIC3" += dailinks +Each subnode of sndcard represents either a dailink, and subnodes of each +dailinks would be cpu/codec/platform dais. + +- link-name: + Usage: required + Value type: + Definition: User friendly name for dai link + += CPU, PLATFORM, CODEC dais subnodes +- cpu: + Usage: required + Value type: + Definition: cpu dai sub-node + +- codec: + Usage: Optional + Value type: + Definition: codec dai sub-node + +- platform: + Usage: Optional + Value type: + Definition: platform dai sub-node + +- sound-dai: + Usage: required + Value type: + Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node. + +Example: + +audio { + compatible = "qcom,apq8096-sndcard"; + qcom,model = "DB820c"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afe HDMI_RX>; + }; + + platform { + sound-dai = <&q6adm>; + }; + + codec { + sound-dai = <&hdmi 0>; + }; + }; +}; -- cgit From 34f5897c59d19ac1b97fd4030b430ac4658c722c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 20 May 2018 09:53:41 -0300 Subject: ASoC: codec: wolfson: Make the node name generic According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the bindings examples. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/wm8510.txt | 2 +- Documentation/devicetree/bindings/sound/wm8523.txt | 2 +- Documentation/devicetree/bindings/sound/wm8524.txt | 2 +- Documentation/devicetree/bindings/sound/wm8580.txt | 2 +- Documentation/devicetree/bindings/sound/wm8711.txt | 2 +- Documentation/devicetree/bindings/sound/wm8728.txt | 2 +- Documentation/devicetree/bindings/sound/wm8731.txt | 2 +- Documentation/devicetree/bindings/sound/wm8737.txt | 2 +- Documentation/devicetree/bindings/sound/wm8741.txt | 2 +- Documentation/devicetree/bindings/sound/wm8750.txt | 2 +- Documentation/devicetree/bindings/sound/wm8753.txt | 2 +- Documentation/devicetree/bindings/sound/wm8770.txt | 2 +- Documentation/devicetree/bindings/sound/wm8776.txt | 2 +- Documentation/devicetree/bindings/sound/wm8804.txt | 2 +- Documentation/devicetree/bindings/sound/wm8903.txt | 2 +- Documentation/devicetree/bindings/sound/wm8994.txt | 2 +- 16 files changed, 16 insertions(+), 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/wm8510.txt b/Documentation/devicetree/bindings/sound/wm8510.txt index fa1a32b85577..e6b6cc041f89 100644 --- a/Documentation/devicetree/bindings/sound/wm8510.txt +++ b/Documentation/devicetree/bindings/sound/wm8510.txt @@ -12,7 +12,7 @@ Required properties: Example: -codec: wm8510@1a { +wm8510: codec@1a { compatible = "wlf,wm8510"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8523.txt b/Documentation/devicetree/bindings/sound/wm8523.txt index 04746186b283..f3a6485f4b8a 100644 --- a/Documentation/devicetree/bindings/sound/wm8523.txt +++ b/Documentation/devicetree/bindings/sound/wm8523.txt @@ -10,7 +10,7 @@ Required properties: Example: -codec: wm8523@1a { +wm8523: codec@1a { compatible = "wlf,wm8523"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8524.txt b/Documentation/devicetree/bindings/sound/wm8524.txt index 0f0553563fc1..f6c0c263b135 100644 --- a/Documentation/devicetree/bindings/sound/wm8524.txt +++ b/Documentation/devicetree/bindings/sound/wm8524.txt @@ -10,7 +10,7 @@ Required properties: Example: -codec: wm8524 { +wm8524: codec { compatible = "wlf,wm8524"; wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8580.txt b/Documentation/devicetree/bindings/sound/wm8580.txt index 78fce9b14954..ff3f9f5f2111 100644 --- a/Documentation/devicetree/bindings/sound/wm8580.txt +++ b/Documentation/devicetree/bindings/sound/wm8580.txt @@ -10,7 +10,7 @@ Required properties: Example: -codec: wm8580@1a { +wm8580: codec@1a { compatible = "wlf,wm8580"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8711.txt b/Documentation/devicetree/bindings/sound/wm8711.txt index 8ed9998cd23c..c30a1387c4bf 100644 --- a/Documentation/devicetree/bindings/sound/wm8711.txt +++ b/Documentation/devicetree/bindings/sound/wm8711.txt @@ -12,7 +12,7 @@ Required properties: Example: -codec: wm8711@1a { +wm8711: codec@1a { compatible = "wlf,wm8711"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8728.txt b/Documentation/devicetree/bindings/sound/wm8728.txt index a8b5c3668e60..a3608b4c78b9 100644 --- a/Documentation/devicetree/bindings/sound/wm8728.txt +++ b/Documentation/devicetree/bindings/sound/wm8728.txt @@ -12,7 +12,7 @@ Required properties: Example: -codec: wm8728@1a { +wm8728: codec@1a { compatible = "wlf,wm8728"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8731.txt b/Documentation/devicetree/bindings/sound/wm8731.txt index 236690e99b87..f660d9bb0e69 100644 --- a/Documentation/devicetree/bindings/sound/wm8731.txt +++ b/Documentation/devicetree/bindings/sound/wm8731.txt @@ -12,7 +12,7 @@ Required properties: Example: -codec: wm8731@1a { +wm8731: codec@1a { compatible = "wlf,wm8731"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8737.txt b/Documentation/devicetree/bindings/sound/wm8737.txt index 4bc2cea3b140..eda1ec6a7563 100644 --- a/Documentation/devicetree/bindings/sound/wm8737.txt +++ b/Documentation/devicetree/bindings/sound/wm8737.txt @@ -12,7 +12,7 @@ Required properties: Example: -codec: wm8737@1a { +wm8737: codec@1a { compatible = "wlf,wm8737"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8741.txt b/Documentation/devicetree/bindings/sound/wm8741.txt index a13315408719..b69e196c741c 100644 --- a/Documentation/devicetree/bindings/sound/wm8741.txt +++ b/Documentation/devicetree/bindings/sound/wm8741.txt @@ -21,7 +21,7 @@ Optional properties: Example: -codec: wm8741@1a { +wm8741: codec@1a { compatible = "wlf,wm8741"; reg = <0x1a>; diff --git a/Documentation/devicetree/bindings/sound/wm8750.txt b/Documentation/devicetree/bindings/sound/wm8750.txt index 8db239fd5ecd..682f221f6f38 100644 --- a/Documentation/devicetree/bindings/sound/wm8750.txt +++ b/Documentation/devicetree/bindings/sound/wm8750.txt @@ -12,7 +12,7 @@ Required properties: Example: -codec: wm8750@1a { +wm8750: codec@1a { compatible = "wlf,wm8750"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8753.txt b/Documentation/devicetree/bindings/sound/wm8753.txt index 8eee61282105..eca9e5a825a9 100644 --- a/Documentation/devicetree/bindings/sound/wm8753.txt +++ b/Documentation/devicetree/bindings/sound/wm8753.txt @@ -34,7 +34,7 @@ Pins on the device (for linking into audio routes): Example: -codec: wm8753@1a { +wm8753: codec@1a { compatible = "wlf,wm8753"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8770.txt b/Documentation/devicetree/bindings/sound/wm8770.txt index 866e00ca150b..cac762a1105d 100644 --- a/Documentation/devicetree/bindings/sound/wm8770.txt +++ b/Documentation/devicetree/bindings/sound/wm8770.txt @@ -10,7 +10,7 @@ Required properties: Example: -codec: wm8770@1 { +wm8770: codec@1 { compatible = "wlf,wm8770"; reg = <1>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8776.txt b/Documentation/devicetree/bindings/sound/wm8776.txt index 3b9ca49abc2b..01173369c3ed 100644 --- a/Documentation/devicetree/bindings/sound/wm8776.txt +++ b/Documentation/devicetree/bindings/sound/wm8776.txt @@ -12,7 +12,7 @@ Required properties: Example: -codec: wm8776@1a { +wm8776: codec@1a { compatible = "wlf,wm8776"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8804.txt b/Documentation/devicetree/bindings/sound/wm8804.txt index 6fd124b16496..2c1641c17a91 100644 --- a/Documentation/devicetree/bindings/sound/wm8804.txt +++ b/Documentation/devicetree/bindings/sound/wm8804.txt @@ -19,7 +19,7 @@ Optional properties: Example: -codec: wm8804@1a { +wm8804: codec@1a { compatible = "wlf,wm8804"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8903.txt b/Documentation/devicetree/bindings/sound/wm8903.txt index afc51caf1137..6371c2434afe 100644 --- a/Documentation/devicetree/bindings/sound/wm8903.txt +++ b/Documentation/devicetree/bindings/sound/wm8903.txt @@ -57,7 +57,7 @@ Pins on the device (for linking into audio routes): Example: -codec: wm8903@1a { +wm8903: codec@1a { compatible = "wlf,wm8903"; reg = <0x1a>; interrupts = < 347 >; diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt index 68c4e8d96bed..4a9dead1b7d3 100644 --- a/Documentation/devicetree/bindings/sound/wm8994.txt +++ b/Documentation/devicetree/bindings/sound/wm8994.txt @@ -59,7 +59,7 @@ Optional properties: Example: -codec: wm8994@1a { +wm8994: codec@1a { compatible = "wlf,wm8994"; reg = <0x1a>; -- cgit From 520a76f855e570c11fd042dd2ab4712ce33fb3a0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 20 May 2018 12:22:48 -0300 Subject: ASoC: codec: realtek: Make the node name generic "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the bindings examples. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rt274.txt | 2 +- Documentation/devicetree/bindings/sound/rt5514.txt | 2 +- Documentation/devicetree/bindings/sound/rt5616.txt | 2 +- Documentation/devicetree/bindings/sound/rt5645.txt | 2 +- Documentation/devicetree/bindings/sound/rt5651.txt | 2 +- Documentation/devicetree/bindings/sound/rt5663.txt | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/rt274.txt b/Documentation/devicetree/bindings/sound/rt274.txt index e9a6178c78cf..791a1bd767b9 100644 --- a/Documentation/devicetree/bindings/sound/rt274.txt +++ b/Documentation/devicetree/bindings/sound/rt274.txt @@ -26,7 +26,7 @@ Pins on the device (for linking into audio routes) for RT274: Example: -codec: rt274@1c { +rt274: codec@1c { compatible = "realtek,rt274"; reg = <0x1c>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt index 4f33b0d96afe..b25ed08c7a5a 100644 --- a/Documentation/devicetree/bindings/sound/rt5514.txt +++ b/Documentation/devicetree/bindings/sound/rt5514.txt @@ -32,7 +32,7 @@ Pins on the device (for linking into audio routes) for I2C: Example: -codec: rt5514@57 { +rt5514: codec@57 { compatible = "realtek,rt5514"; reg = <0x57>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5616.txt b/Documentation/devicetree/bindings/sound/rt5616.txt index e41085818559..540a4bf252e4 100644 --- a/Documentation/devicetree/bindings/sound/rt5616.txt +++ b/Documentation/devicetree/bindings/sound/rt5616.txt @@ -26,7 +26,7 @@ Pins on the device (for linking into audio routes) for RT5616: Example: -codec: rt5616@1b { +rt5616: codec@1b { compatible = "realtek,rt5616"; reg = <0x1b>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt index 7cee1f518f59..a03f9a872a71 100644 --- a/Documentation/devicetree/bindings/sound/rt5645.txt +++ b/Documentation/devicetree/bindings/sound/rt5645.txt @@ -69,4 +69,4 @@ codec: rt5650@1a { realtek,dmic-en = "true"; realtek,en-jd-func = "true"; realtek,jd-mode = <3>; -}; \ No newline at end of file +}; diff --git a/Documentation/devicetree/bindings/sound/rt5651.txt b/Documentation/devicetree/bindings/sound/rt5651.txt index b85221864cec..a41199a5cd79 100644 --- a/Documentation/devicetree/bindings/sound/rt5651.txt +++ b/Documentation/devicetree/bindings/sound/rt5651.txt @@ -50,7 +50,7 @@ Pins on the device (for linking into audio routes) for RT5651: Example: -codec: rt5651@1a { +rt5651: codec@1a { compatible = "realtek,rt5651"; reg = <0x1a>; realtek,dmic-en = "true"; diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index 497bcfc58b71..23386446c63d 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -47,7 +47,7 @@ Pins on the device (for linking into audio routes) for RT5663: Example: -codec: rt5663@12 { +rt5663: codec@12 { compatible = "realtek,rt5663"; reg = <0x12>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; -- cgit From 09b83d107d8ac70ff8b0c368182e36a6e06b8cf4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 18 May 2018 12:18:59 +0200 Subject: ALSA: hda/conexant - Add hp-mic-fix model string Add "hp-mic-fix" model string for Conexant codecs so that user can test the quirk without recompiling. Signed-off-by: Takashi Iwai --- Documentation/sound/hd-audio/models.rst | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst index 1fee5a4f6660..7c2d37571af0 100644 --- a/Documentation/sound/hd-audio/models.rst +++ b/Documentation/sound/hd-audio/models.rst @@ -263,6 +263,8 @@ hp-dock HP dock support mute-led-gpio Mute LED control via GPIO +hp-mic-fix + Fix for headset mic pin on HP boxes STAC9200 ======== -- cgit From f274baa49be67dd8a9f318cd95da6ef9f565d06b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 27 May 2018 13:01:17 +0200 Subject: ALSA: usb-audio: Allow non-vmalloc buffer for PCM buffers Currently, USB-audio driver allocates the PCM buffer via vmalloc(), as this serves merely as an intermediate buffer that is copied to each URB transfer buffer. This works well in general on x86, but on some archs this may result in cache coherency issues when mmap is used. OTOH, it works also on such arch unless mmap is used. This patch is a step for mitigating the inconvenience; a new module option "use_vmalloc" is provided so that user can choose to allocate the DMA coherent buffer instead of the existing vmalloc buffer. The drawback is that it'd be the standard dma_alloc_coherent() calls and the system would require contiguous pages on non-x86 archs. Note that it's a global option and not dynamically switchable since the buffer is pre-allocated at the probe time. In theory, it's possible to be switchable, but it'd be trickier and racier. As default use_vmalloc option is set to true, so that the old behavior is kept. For allowing the coherent mmap on ARM or MIPS, pass use_vmalloc=0 option explicitly. Reported-and-tested-by: Daniel Danzberger Signed-off-by: Takashi Iwai --- Documentation/sound/alsa-configuration.rst | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst index aed6b4fb8e46..b1052e18292d 100644 --- a/Documentation/sound/alsa-configuration.rst +++ b/Documentation/sound/alsa-configuration.rst @@ -2224,6 +2224,13 @@ quirk_alias Quirk alias list, pass strings like ``0123abcd:5678beef``, which applies the existing quirk for the device 5678:beef to a new device 0123:abcd. +use_vmalloc + Use vmalloc() for allocations of the PCM buffers (default: yes). + For architectures with non-coherent memory like ARM or MIPS, the + mmap access may give inconsistent results with vmalloc'ed + buffers. If mmap is used on such architectures, turn off this + option, so that the DMA-coherent buffers are allocated and used + instead. This module supports multiple devices, autoprobe and hotplugging. -- cgit From ad7a9b34fa532b95a7eae1a1708408a4e435a71c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 29 May 2018 11:18:28 +0100 Subject: ASoC: qdsp6: dt-bindings: Add q6afe tdm dt binding This patch adds bindings required for TDM ports on AFE. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/qcom,q6afe.txt | 68 ++++++++++++++++++++++ 1 file changed, 68 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt index 14335a08b963..bdbf87df8c0b 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt @@ -46,6 +46,53 @@ configuration of each dai. Must contain the following properties. Definition: Must be list of serial data lines used by this dai. should be one or more of the 1-4 sd lines. + - qcom,tdm-sync-mode: + Usage: required for tdm interface + Value type: + Definition: Synchronization mode. + 0 - Short sync bit mode + 1 - Long sync mode + 2 - Short sync slot mode + + - qcom,tdm-sync-src: + Usage: required for tdm interface + Value type: + Definition: Synchronization source. + 0 - External source + 1 - Internal source + + - qcom,tdm-data-out: + Usage: required for tdm interface + Value type: + Definition: Data out signal to drive with other masters. + 0 - Disable + 1 - Enable + + - qcom,tdm-invert-sync: + Usage: required for tdm interface + Value type: + Definition: Invert the sync. + 0 - Normal + 1 - Invert + + - qcom,tdm-data-delay: + Usage: required for tdm interface + Value type: + Definition: Number of bit clock to delay data + with respect to sync edge. + 0 - 0 bit clock cycle + 1 - 1 bit clock cycle + 2 - 2 bit clock cycle + + - qcom,tdm-data-align: + Usage: required for tdm interface + Value type: + Definition: Indicate how data is packed + within the slot. For example, 32 slot width in case of + sample bit width is 24. + 0 - MSB + 1 - LSB + = EXAMPLE q6afe@4 { @@ -61,6 +108,27 @@ q6afe@4 { reg = <1>; }; + tdm@24 { + reg = <24>; + qcom,tdm-sync-mode = <1>: + qcom,tdm-sync-src = <1>; + qcom,tdm-data-out = <0>; + qcom,tdm-invert-sync = <1>; + qcom,tdm-data-delay = <1>; + qcom,tdm-data-align = <0>; + + }; + + tdm@25 { + reg = <25>; + qcom,tdm-sync-mode = <1>: + qcom,tdm-sync-src = <1>; + qcom,tdm-data-out = <0>; + qcom,tdm-invert-sync = <1>; + qcom,tdm-data-delay <1>: + qcom,tdm-data-align = <0>; + }; + prim-mi2s-rx@16 { reg = <16>; qcom,sd-lines = <1 3>; -- cgit From 969cc0528e0efdfdeaa5bbc0ab707d8a7819a8ec Mon Sep 17 00:00:00 2001 From: Cyrille Pitchen Date: Fri, 25 May 2018 15:34:25 +0300 Subject: ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S controller This patch adds DT bindings for the new Atmel I2S controller embedded inside sama5d2x SoCs. Signed-off-by: Cyrille Pitchen Signed-off-by: Codrin Ciubotariu Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/atmel-i2s.txt | 47 ++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/atmel-i2s.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt new file mode 100644 index 000000000000..735368b8a73f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel-i2s.txt @@ -0,0 +1,47 @@ +* Atmel I2S controller + +Required properties: +- compatible: Should be "atmel,sama5d2-i2s". +- reg: Should be the physical base address of the controller and the + length of memory mapped region. +- interrupts: Should contain the interrupt for the controller. +- dmas: Should be one per channel name listed in the dma-names property, + as described in atmel-dma.txt and dma.txt files. +- dma-names: Two dmas have to be defined, "tx" and "rx". + This IP also supports one shared channel for both rx and tx; + if this mode is used, one "rx-tx" name must be used. +- clocks: Must contain an entry for each entry in clock-names. + Please refer to clock-bindings.txt. +- clock-names: Should be one of each entry matching the clocks phandles list: + - "pclk" (peripheral clock) Required. + - "gclk" (generated clock) Optional (1). + - "aclk" (Audio PLL clock) Optional (1). + - "muxclk" (I2S mux clock) Optional (1). + +Optional properties: +- pinctrl-0: Should specify pin control groups used for this controller. +- princtrl-names: Should contain only one value - "default". + + +(1) : Only the peripheral clock is required. The generated clock, the Audio + PLL clock adn the I2S mux clock are optional and should only be set + together, when Master Mode is required. + +Example: + + i2s@f8050000 { + compatible = "atmel,sama5d2-i2s"; + reg = <0xf8050000 0x300>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>; + dma-names = "tx", "rx"; + clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>; + clock-names = "pclk", "gclk", "aclk", "muxclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s0_default>; + }; -- cgit From e9be4ffd4f40fcb18209dc5120233f2d11a24b6a Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 30 May 2018 21:45:56 +0200 Subject: ASoC: simple-card: set cpu dai clk in hw_params The simple-card driver currently accepts a clock node in the cpu dai sub-node and only uses it as an alternative to the 'system-clock-frequency' property to get the current frequency. This patch adds another use of the passed clock node. If mclk-fs is specified, the clocks in cpu and codec dai sub-nodes will be set to the calculated rate (stream rate * mclk_fs) in hw_params. This allows platforms to pass tuneable clocks as phandle that will automatically be set to the right rates. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/simple-card.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index 17c13e74667d..a4c72d09cd45 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -86,6 +86,11 @@ Optional CPU/CODEC subnodes properties: in dai startup() and disabled with clk_disable_unprepare() in dai shutdown(). + If a clock is specified and a + multiplication factor is given with + mclk-fs, the clock will be set to the + calculated mclk frequency when the + stream starts. - system-clock-direction-out : specifies clock direction as 'out' on initialization. It is useful for some aCPUs with fixed clocks. -- cgit From 0e725b483bbed3c6178c3928fd9b62dadc2eb240 Mon Sep 17 00:00:00 2001 From: Steven Eckhoff Date: Thu, 31 May 2018 15:24:07 -0500 Subject: ASoC: TSCS454: Add Support Currently there is no support for Tempo Semiconductor's TSCS454 CODEC. Add support for it. Signed-off-by: Steven Eckhoff Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/tscs454.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tscs454.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/tscs454.txt b/Documentation/devicetree/bindings/sound/tscs454.txt new file mode 100644 index 000000000000..3ba3e2d2c206 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tscs454.txt @@ -0,0 +1,23 @@ +TSCS454 Audio CODEC + +Required Properties: + + - compatible : "tempo,tscs454" + + - reg : <0x69> + + - clock-names: Must one of the following "xtal", "mclk1", "mclk2" + + - clocks: phandle of the clock that provides the codec sysclk + + Note: If clock is not provided then bit clock is assumed + +Example: + +redwood: codec@69 { + #sound-dai-cells = <1>; + compatible = "tempo,tscs454"; + reg = <0x69>; + clock-names = "mclk1"; + clocks = <&audio_mclk>; +}; -- cgit