From f7d46c5efee26349b49c13f9ebbfbd6aad8d1e71 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:14 +0300 Subject: dt-bindings: display/msm: split qcom, mdss bindings Split Mobile Display SubSystem (MDSS) root node bindings to the separate yaml file. Changes to the existing (txt) schema: - Added optional "vbif_nrt_phys" region used by msm8996 - Made "bus" and "vsync" clocks optional (they are not used by some platforms) - Added optional resets property referencing MDSS reset - Defined child nodes pointing to corresponding reference schema. - Dropped the "lut" clock. It was added to the schema by mistake (it is a part of mdp4 schema, not the mdss). Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508378/ Link: https://lore.kernel.org/r/20221024164225.3236654-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- .../devicetree/bindings/display/msm/mdp5.txt | 30 +--- .../devicetree/bindings/display/msm/qcom,mdss.yaml | 196 +++++++++++++++++++++ 2 files changed, 197 insertions(+), 29 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt index 43d11279c925..65d03c58dee6 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt @@ -2,37 +2,9 @@ Qualcomm adreno/snapdragon MDP5 display controller Description: -This is the bindings documentation for the Mobile Display Subsytem(MDSS) that -encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display +This is the bindings documentation for the MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996. -MDSS: -Required properties: -- compatible: - * "qcom,mdss" - MDSS -- reg: Physical base address and length of the controller's registers. -- reg-names: The names of register regions. The following regions are required: - * "mdss_phys" - * "vbif_phys" -- interrupts: The interrupt signal from MDSS. -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt -- clocks: device clocks. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. - * "iface" - * "bus" - * "vsync" -- #address-cells: number of address cells for the MDSS children. Should be 1. -- #size-cells: Should be 1. -- ranges: parent bus address space is the same as the child bus address space. - -Optional properties: -- clock-names: the following clocks are optional: - * "lut" - MDP5: Required properties: - compatible: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml new file mode 100644 index 000000000000..ba0460268731 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Mobile Display SubSystem (MDSS) + +maintainers: + - Dmitry Baryshkov + - Rob Clark + +description: + This is the bindings documentation for the Mobile Display Subsytem(MDSS) that + encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc. + +properties: + compatible: + enum: + - qcom,mdss + + reg: + minItems: 2 + maxItems: 3 + + reg-names: + minItems: 2 + items: + - const: mdss_phys + - const: vbif_phys + - const: vbif_nrt_phys + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + power-domains: + maxItems: 1 + description: | + The MDSS power domain provided by GCC + + clocks: + minItems: 1 + items: + - description: Display abh clock + - description: Display axi clock + - description: Display vsync clock + + clock-names: + minItems: 1 + items: + - const: iface + - const: bus + - const: vsync + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + resets: + items: + - description: MDSS_CORE reset + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-controller + - "#interrupt-cells" + - power-domains + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "^mdp@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + const: qcom,mdp5 + + "^dsi@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,dsi-phy-14nm + - qcom,dsi-phy-14nm-660 + - qcom,dsi-phy-14nm-8953 + - qcom,dsi-phy-20nm + - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-lp + + "^hdmi-phy@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,hdmi-phy-8084 + - qcom,hdmi-phy-8660 + - qcom,hdmi-phy-8960 + - qcom,hdmi-phy-8974 + - qcom,hdmi-phy-8996 + + "^hdmi-tx@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8660 + - qcom,hdmi-tx-8960 + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8996 + +additionalProperties: false + +examples: + - | + #include + #include + mdss@1a00000 { + compatible = "qcom,mdss"; + reg = <0x1a00000 0x1000>, + <0x1ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + }; +... -- cgit From 1db11fc37fdd903b7f4765b83ba5c9961be7ab56 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:15 +0300 Subject: dt-bindings: display/msm: add gcc-bus clock to dpu-smd845 Add gcc-bus clock required for the SDM845 DPU device tree node. This change was made in the commit 111c52854102 ("arm64: dts: qcom: sdm845: move bus clock to mdp node for sdm845 target"), but was not reflected in the schema. Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508379/ Link: https://lore.kernel.org/r/20221024164225.3236654-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index 7d1037373175..3cb2ae336996 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -84,6 +84,7 @@ patternProperties: clocks: items: + - description: Display GCC bus clock - description: Display ahb clock - description: Display axi clock - description: Display core clock @@ -91,6 +92,7 @@ patternProperties: clock-names: items: + - const: gcc-bus - const: iface - const: bus - const: core @@ -183,11 +185,12 @@ examples: <0x0aeb0000 0x2008>; reg-names = "mdp", "vbif"; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, <&dispcc DISP_CC_MDSS_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>, <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "core", "vsync"; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; interrupt-parent = <&mdss>; interrupts = <0>; -- cgit From 4116c9ad3a9d0ec4c6aa558b58472c51afff9c24 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:16 +0300 Subject: dt-bindings: display/msm: add interconnects property to qcom, mdss-smd845 Add interconnects required for the SDM845 MDSS device tree node. This change was made in the commit c8c61c09e38b ("arm64: dts: qcom: sdm845: Add interconnects property for display"), but was not reflected in the schema. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508380/ Link: https://lore.kernel.org/r/20221024164225.3236654-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index 3cb2ae336996..a87deea8e9bc 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -57,6 +57,16 @@ properties: ranges: true + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from mdp1 port to the data bus + + interconnect-names: + items: + - const: mdp0-mem + - const: mdp1-mem + resets: items: - description: MDSS_CORE reset -- cgit From c3d7f3e7bbab635d1846844b747bf7e01d1c339a Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:17 +0300 Subject: dt-bindings: display/msm: move common DPU properties to dpu-common.yaml Move properties common to all DPU DT nodes to the dpu-common.yaml. Note, this removes description of individual DPU port@ nodes. However such definitions add no additional value. The reg values do not correspond to hardware INTF indices. The driver discovers and binds these ports not paying any care for the order of these items. Thus just leave the reference to graph.yaml#/properties/ports and the description. Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508384/ Link: https://lore.kernel.org/r/20221024164225.3236654-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/dpu-common.yaml | 52 ++++++++++++++++++++++ .../bindings/display/msm/dpu-msm8998.yaml | 44 +----------------- .../bindings/display/msm/dpu-qcm2290.yaml | 39 +--------------- .../bindings/display/msm/dpu-sc7180.yaml | 43 +----------------- .../bindings/display/msm/dpu-sc7280.yaml | 43 +----------------- .../bindings/display/msm/dpu-sdm845.yaml | 44 +----------------- 6 files changed, 62 insertions(+), 203 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml new file mode 100644 index 000000000000..8ffbc30c6b7f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml @@ -0,0 +1,52 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU common properties + +maintainers: + - Krishna Manikandan + - Dmitry Baryshkov + - Rob Clark + +description: | + Common properties for QCom DPU display controller. + +properties: + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. + + patternProperties: + "^port@[0-9a-f]+$": + $ref: /schemas/graph.yaml#/properties/port + + # at least one port is required + required: + - port@0 + +required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml index 253665c693e6..200eeace1c71 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -61,8 +61,9 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + $ref: /schemas/display/msm/dpu-common.yaml# description: Node containing the properties of DPU. - additionalProperties: false + unevaluatedProperties: false properties: compatible: @@ -99,47 +100,6 @@ patternProperties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml index c5824e1d2382..d5f1d16b13d3 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml @@ -73,8 +73,9 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + $ref: /schemas/display/msm/dpu-common.yaml# description: Node containing the properties of DPU. - additionalProperties: false + unevaluatedProperties: false properties: compatible: @@ -107,42 +108,6 @@ patternProperties: - const: lut - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index 4890bc25f3fd..2ac10664d79a 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -72,8 +72,9 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + $ref: /schemas/display/msm/dpu-common.yaml# description: Node containing the properties of DPU. - additionalProperties: false + unevaluatedProperties: false properties: compatible: @@ -108,46 +109,6 @@ patternProperties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@2: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF0 (DP) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index 584d646021d5..4ca7bc7f0185 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -71,8 +71,9 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + $ref: /schemas/display/msm/dpu-common.yaml# description: Node containing the properties of DPU. - additionalProperties: false + unevaluatedProperties: false properties: compatible: @@ -106,46 +107,6 @@ patternProperties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF5 (EDP) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index a87deea8e9bc..de193ca11265 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -74,8 +74,9 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + $ref: /schemas/display/msm/dpu-common.yaml# description: Node containing the properties of DPU. - additionalProperties: false + unevaluatedProperties: false properties: compatible: @@ -108,47 +109,6 @@ patternProperties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - required: - compatible - reg -- cgit From 5a5c7b35f00f734b38f320ab95b0e571c1874e09 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:18 +0300 Subject: dt-bindings: display/msm: move common MDSS properties to mdss-common.yaml Move properties common to all MDSS DT nodes to the mdss-common.yaml. This extends qcom,msm8998-mdss schema to allow interconnect nodes, which will be added later, once msm8998 gains interconnect support. Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508385/ Link: https://lore.kernel.org/r/20221024164225.3236654-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/dpu-msm8998.yaml | 41 ++--------- .../bindings/display/msm/dpu-qcm2290.yaml | 51 ++----------- .../bindings/display/msm/dpu-sc7180.yaml | 50 ++----------- .../bindings/display/msm/dpu-sc7280.yaml | 50 ++----------- .../bindings/display/msm/dpu-sdm845.yaml | 54 ++------------ .../bindings/display/msm/mdss-common.yaml | 83 ++++++++++++++++++++++ 6 files changed, 111 insertions(+), 218 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/mdss-common.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml index 200eeace1c71..67791dbc3b5d 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -14,20 +14,13 @@ description: | sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree bindings of MDSS and DPU are mentioned for MSM8998 target. +$ref: /schemas/display/msm/mdss-common.yaml# + properties: compatible: items: - const: qcom,msm8998-mdss - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - clocks: items: - description: Display AHB clock @@ -40,23 +33,8 @@ properties: - const: bus - const: core - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - ranges: true + maxItems: 1 patternProperties: "^display-controller@[0-9a-f]+$": @@ -100,18 +78,7 @@ patternProperties: - const: core - const: vsync -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml index d5f1d16b13d3..42e676bdda4e 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml @@ -14,20 +14,13 @@ description: | sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS and DPU are mentioned for QCM2290 target. +$ref: /schemas/display/msm/mdss-common.yaml# + properties: compatible: items: - const: qcom,qcm2290-mdss - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - clocks: items: - description: Display AHB clock from gcc @@ -40,35 +33,14 @@ properties: - const: bus - const: core - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 - - ranges: true + maxItems: 2 interconnects: - items: - - description: Interconnect path specifying the port ids for data bus + maxItems: 1 interconnect-names: - const: mdp0-mem - - resets: - items: - - description: MDSS_CORE reset + maxItems: 1 patternProperties: "^display-controller@[0-9a-f]+$": @@ -108,18 +80,7 @@ patternProperties: - const: lut - const: vsync -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index 2ac10664d79a..99d6bbd45faf 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -14,20 +14,13 @@ description: | sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree bindings of MDSS and DPU are mentioned for SC7180 target. +$ref: /schemas/display/msm/mdss-common.yaml# + properties: compatible: items: - const: qcom,sc7180-mdss - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - clocks: items: - description: Display AHB clock from gcc @@ -40,34 +33,14 @@ properties: - const: ahb - const: core - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - ranges: true + maxItems: 1 interconnects: - items: - - description: Interconnect path specifying the port ids for data bus + maxItems: 1 interconnect-names: - const: mdp0-mem - - resets: - items: - - description: MDSS_CORE reset + maxItems: 1 patternProperties: "^display-controller@[0-9a-f]+$": @@ -109,18 +82,7 @@ patternProperties: - const: core - const: vsync -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index 4ca7bc7f0185..01ff88c06c51 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -14,19 +14,12 @@ description: | sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree bindings of MDSS and DPU are mentioned for SC7280. +$ref: /schemas/display/msm/mdss-common.yaml# + properties: compatible: const: qcom,sc7280-mdss - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - clocks: items: - description: Display AHB clock from gcc @@ -39,34 +32,14 @@ properties: - const: ahb - const: core - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - ranges: true + maxItems: 1 interconnects: - items: - - description: Interconnect path specifying the port ids for data bus + maxItems: 1 interconnect-names: - const: mdp0-mem - - resets: - items: - - description: MDSS_CORE reset + maxItems: 1 patternProperties: "^display-controller@[0-9a-f]+$": @@ -107,18 +80,7 @@ patternProperties: - const: core - const: vsync -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index de193ca11265..ae649bb6aa81 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -14,20 +14,13 @@ description: | sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree bindings of MDSS and DPU are mentioned for SDM845 target. +$ref: /schemas/display/msm/mdss-common.yaml# + properties: compatible: items: - const: qcom,sdm845-mdss - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - clocks: items: - description: Display AHB clock from gcc @@ -38,38 +31,14 @@ properties: - const: iface - const: core - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 - - ranges: true + maxItems: 2 interconnects: - items: - - description: Interconnect path from mdp0 port to the data bus - - description: Interconnect path from mdp1 port to the data bus + maxItems: 2 interconnect-names: - items: - - const: mdp0-mem - - const: mdp1-mem - - resets: - items: - - description: MDSS_CORE reset + maxItems: 2 patternProperties: "^display-controller@[0-9a-f]+$": @@ -109,18 +78,7 @@ patternProperties: - const: core - const: vsync -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml new file mode 100644 index 000000000000..2a476bd0215e --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/mdss-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display MDSS common properties + +maintainers: + - Krishna Manikandan + - Dmitry Baryshkov + - Rob Clark + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. + +properties: + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + maxItems: 3 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + minItems: 1 + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 + + ranges: true + + interconnects: + minItems: 1 + items: + - description: Interconnect path from mdp0 (or a single mdp) port to the data bus + - description: Interconnect path from mdp1 port to the data bus + + interconnect-names: + minItems: 1 + items: + - const: mdp0-mem + - const: mdp1-mem + + resets: + items: + - description: MDSS_CORE reset + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: true -- cgit From aba04b0db9154125b5b328e9435378c7ed332969 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:19 +0300 Subject: dt-bindings: display/msm: split dpu-sc7180 into DPU and MDSS parts In order to make the schema more readable, split dpu-sc7180 into the DPU and MDSS parts, each one describing just a single device binding. Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508386/ Link: https://lore.kernel.org/r/20221024164225.3236654-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/dpu-sc7180.yaml | 158 --------------------- .../bindings/display/msm/qcom,sc7180-dpu.yaml | 95 +++++++++++++ .../bindings/display/msm/qcom,sc7180-mdss.yaml | 125 ++++++++++++++++ 3 files changed, 220 insertions(+), 158 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml deleted file mode 100644 index 99d6bbd45faf..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ /dev/null @@ -1,158 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for SC7180 target - -maintainers: - - Krishna Manikandan - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for SC7180 target. - -$ref: /schemas/display/msm/mdss-common.yaml# - -properties: - compatible: - items: - - const: qcom,sc7180-mdss - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display AHB clock from dispcc - - description: Display core clock - - clock-names: - items: - - const: iface - - const: ahb - - const: core - - iommus: - maxItems: 1 - - interconnects: - maxItems: 1 - - interconnect-names: - maxItems: 1 - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - $ref: /schemas/display/msm/dpu-common.yaml# - description: Node containing the properties of DPU. - unevaluatedProperties: false - - properties: - compatible: - items: - - const: qcom,sc7180-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display hf axi clock - - description: Display ahb clock - - description: Display rotator clock - - description: Display lut clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: bus - - const: iface - - const: rot - - const: lut - - const: core - - const: vsync - -unevaluatedProperties: false - -examples: - - | - #include - #include - #include - #include - #include - - display-subsystem@ae00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,sc7180-mdss"; - reg = <0xae00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc MDSS_GDSC>; - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "ahb", "core"; - - interrupts = ; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; - - iommus = <&apps_smmu 0x800 0x2>; - ranges; - - display-controller@ae01000 { - compatible = "qcom,sc7180-dpu"; - reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; - - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_ROT_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", "iface", "rot", "lut", "core", - "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - power-domains = <&rpmhpd SC7180_CX>; - operating-points-v2 = <&mdp_opp_table>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@2 { - reg = <2>; - dpu_intf0_out: endpoint { - remote-endpoint = <&dp_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml new file mode 100644 index 000000000000..bd590a6b5b96 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7180 target + +maintainers: + - Krishna Manikandan + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,sc7180-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display ahb clock + - description: Display rotator clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: iface + - const: rot + - const: lut + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml new file mode 100644 index 000000000000..103cfd60c61b --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7180 Display MDSS + +maintainers: + - Krishna Manikandan + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SC7180 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sc7180-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 1 + + interconnect-names: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7180-dpu + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7180-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x800 0x2>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + }; +... -- cgit From 2c44a9936636b8fb33aff9ea6ee9da5b372f8dfb Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:20 +0300 Subject: dt-bindings: display/msm: split dpu-sc7280 into DPU and MDSS parts In order to make the schema more readable, split dpu-sc7280 into the DPU and MDSS parts, each one describing just a single device binding. Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508387/ Link: https://lore.kernel.org/r/20221024164225.3236654-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/dpu-sc7280.yaml | 162 --------------------- .../bindings/display/msm/qcom,sc7280-dpu.yaml | 98 +++++++++++++ .../bindings/display/msm/qcom,sc7280-mdss.yaml | 130 +++++++++++++++++ 3 files changed, 228 insertions(+), 162 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml deleted file mode 100644 index 01ff88c06c51..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ /dev/null @@ -1,162 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for SC7280 - -maintainers: - - Krishna Manikandan - -description: | - Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for SC7280. - -$ref: /schemas/display/msm/mdss-common.yaml# - -properties: - compatible: - const: qcom,sc7280-mdss - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display AHB clock from dispcc - - description: Display core clock - - clock-names: - items: - - const: iface - - const: ahb - - const: core - - iommus: - maxItems: 1 - - interconnects: - maxItems: 1 - - interconnect-names: - maxItems: 1 - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - $ref: /schemas/display/msm/dpu-common.yaml# - description: Node containing the properties of DPU. - unevaluatedProperties: false - - properties: - compatible: - const: qcom,sc7280-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display hf axi clock - - description: Display sf axi clock - - description: Display ahb clock - - description: Display lut clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: bus - - const: nrt_bus - - const: iface - - const: lut - - const: core - - const: vsync - -unevaluatedProperties: false - -examples: - - | - #include - #include - #include - #include - #include - - display-subsystem@ae00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,sc7280-mdss"; - reg = <0xae00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", - "ahb", - "core"; - - interrupts = ; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; - - iommus = <&apps_smmu 0x900 0x402>; - ranges; - - display-controller@ae01000 { - compatible = "qcom,sc7280-dpu"; - reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; - - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&gcc GCC_DISP_SF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", - "nrt_bus", - "iface", - "lut", - "core", - "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&mdp_opp_table>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf5_out: endpoint { - remote-endpoint = <&edp_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml new file mode 100644 index 000000000000..924059b387b6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7280 + +maintainers: + - Krishna Manikandan + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sc7280-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml new file mode 100644 index 000000000000..d4ac2d5d13fb --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 Display MDSS + +maintainers: + - Krishna Manikandan + +description: + Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SC7280. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sc7280-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 1 + + interconnect-names: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7280-dpu + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7280-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x900 0x402>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + }; + }; +... -- cgit From 2abfd6a2873f1f7ad9e309fa2735fe096adc9d67 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:21 +0300 Subject: dt-bindings: display/msm: split dpu-sdm845 into DPU and MDSS parts In order to make the schema more readable, split dpu-sdm845 into the DPU and MDSS parts, each one describing just a single device binding. Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508382/ Link: https://lore.kernel.org/r/20221024164225.3236654-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/dpu-sdm845.yaml | 148 --------------------- .../bindings/display/msm/qcom,sdm845-dpu.yaml | 90 +++++++++++++ .../bindings/display/msm/qcom,sdm845-mdss.yaml | 117 ++++++++++++++++ 3 files changed, 207 insertions(+), 148 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml deleted file mode 100644 index ae649bb6aa81..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ /dev/null @@ -1,148 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for SDM845 target - -maintainers: - - Krishna Manikandan - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for SDM845 target. - -$ref: /schemas/display/msm/mdss-common.yaml# - -properties: - compatible: - items: - - const: qcom,sdm845-mdss - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display core clock - - clock-names: - items: - - const: iface - - const: core - - iommus: - maxItems: 2 - - interconnects: - maxItems: 2 - - interconnect-names: - maxItems: 2 - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - $ref: /schemas/display/msm/dpu-common.yaml# - description: Node containing the properties of DPU. - unevaluatedProperties: false - - properties: - compatible: - items: - - const: qcom,sdm845-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display GCC bus clock - - description: Display ahb clock - - description: Display axi clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: gcc-bus - - const: iface - - const: bus - - const: core - - const: vsync - -unevaluatedProperties: false - -examples: - - | - #include - #include - #include - #include - - display-subsystem@ae00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,sdm845-mdss"; - reg = <0x0ae00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc MDSS_GDSC>; - - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "core"; - - interrupts = ; - interrupt-controller; - #interrupt-cells = <1>; - - iommus = <&apps_smmu 0x880 0x8>, - <&apps_smmu 0xc80 0x8>; - ranges; - - display-controller@ae01000 { - compatible = "qcom,sdm845-dpu"; - reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&mdp_opp_table>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml new file mode 100644 index 000000000000..5719b45f2860 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SDM845 target + +maintainers: + - Krishna Manikandan + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,sdm845-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display GCC bus clock + - description: Display ahb clock + - description: Display axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: gcc-bus + - const: iface + - const: bus + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml new file mode 100644 index 000000000000..47fe66f4da54 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM845 Display MDSS + +maintainers: + - Krishna Manikandan + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SDM845 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sdm845-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: core + + iommus: + maxItems: 2 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sdm845-dpu + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sdm845-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + }; +... -- cgit From 9410872ff04062924d15569b22ceb4e341c1b049 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:22 +0300 Subject: dt-bindings: display/msm: split dpu-msm8998 into DPU and MDSS parts In order to make the schema more readable, split dpu-msm8998 into the DPU and MDSS parts, each one describing just a single device binding. Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508388/ Link: https://lore.kernel.org/r/20221024164225.3236654-10-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/dpu-msm8998.yaml | 150 --------------------- .../bindings/display/msm/qcom,msm8998-dpu.yaml | 95 +++++++++++++ .../bindings/display/msm/qcom,msm8998-mdss.yaml | 115 ++++++++++++++++ 3 files changed, 210 insertions(+), 150 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml deleted file mode 100644 index 67791dbc3b5d..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml +++ /dev/null @@ -1,150 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for MSM8998 target - -maintainers: - - AngeloGioacchino Del Regno - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for MSM8998 target. - -$ref: /schemas/display/msm/mdss-common.yaml# - -properties: - compatible: - items: - - const: qcom,msm8998-mdss - - clocks: - items: - - description: Display AHB clock - - description: Display AXI clock - - description: Display core clock - - clock-names: - items: - - const: iface - - const: bus - - const: core - - iommus: - maxItems: 1 - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - $ref: /schemas/display/msm/dpu-common.yaml# - description: Node containing the properties of DPU. - unevaluatedProperties: false - - properties: - compatible: - items: - - const: qcom,msm8998-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for regdma register set - - description: Address offset and size for vbif register set - - description: Address offset and size for non-realtime vbif register set - - reg-names: - items: - - const: mdp - - const: regdma - - const: vbif - - const: vbif_nrt - - clocks: - items: - - description: Display ahb clock - - description: Display axi clock - - description: Display mem-noc clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: iface - - const: bus - - const: mnoc - - const: core - - const: vsync - -unevaluatedProperties: false - -examples: - - | - #include - #include - #include - - mdss: display-subsystem@c900000 { - compatible = "qcom,msm8998-mdss"; - reg = <0x0c900000 0x1000>; - reg-names = "mdss"; - - clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - #address-cells = <1>; - #interrupt-cells = <1>; - #size-cells = <1>; - - interrupts = ; - interrupt-controller; - iommus = <&mmss_smmu 0>; - - power-domains = <&mmcc MDSS_GDSC>; - ranges; - - display-controller@c901000 { - compatible = "qcom,msm8998-dpu"; - reg = <0x0c901000 0x8f000>, - <0x0c9a8e00 0xf0>, - <0x0c9b0000 0x2008>, - <0x0c9b8000 0x1040>; - reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; - - clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MNOC_AHB_CLK>, - <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "mnoc", "core", "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmpd MSM8998_VDDMX>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml new file mode 100644 index 000000000000..b02adba36e9e --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for MSM8998 target + +maintainers: + - AngeloGioacchino Del Regno + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,msm8998-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for regdma register set + - description: Address offset and size for vbif register set + - description: Address offset and size for non-realtime vbif register set + + reg-names: + items: + - const: mdp + - const: regdma + - const: vbif + - const: vbif_nrt + + clocks: + items: + - description: Display ahb clock + - description: Display axi clock + - description: Display mem-noc clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: mnoc + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include + #include + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml new file mode 100644 index 000000000000..192a832ef808 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8998 Display MDSS + +maintainers: + - AngeloGioacchino Del Regno + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for MSM8998 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,msm8998-mdss + + clocks: + items: + - description: Display AHB clock + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,msm8998-dpu + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + display-subsystem@c900000 { + compatible = "qcom,msm8998-mdss"; + reg = <0x0c900000 0x1000>; + reg-names = "mdss"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + #address-cells = <1>; + #interrupt-cells = <1>; + #size-cells = <1>; + + interrupts = ; + interrupt-controller; + iommus = <&mmss_smmu 0>; + + power-domains = <&mmcc MDSS_GDSC>; + ranges; + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + }; +... -- cgit From 06097b13ef97a5e55dd4131a8a05c5af1aad2ad3 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:23 +0300 Subject: dt-bindings: display/msm: split dpu-qcm2290 into DPU and MDSS parts In order to make the schema more readable, split dpu-qcm2290 into the DPU and MDSS parts, each one describing just a single device binding. Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508383/ Link: https://lore.kernel.org/r/20221024164225.3236654-11-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/dpu-qcm2290.yaml | 148 --------------------- .../bindings/display/msm/qcom,qcm2290-dpu.yaml | 84 ++++++++++++ .../bindings/display/msm/qcom,qcm2290-mdss.yaml | 117 ++++++++++++++++ 3 files changed, 201 insertions(+), 148 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml deleted file mode 100644 index 42e676bdda4e..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ /dev/null @@ -1,148 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-qcm2290.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for QCM2290 target - -maintainers: - - Loic Poulain - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS - and DPU are mentioned for QCM2290 target. - -$ref: /schemas/display/msm/mdss-common.yaml# - -properties: - compatible: - items: - - const: qcom,qcm2290-mdss - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display AXI clock - - description: Display core clock - - clock-names: - items: - - const: iface - - const: bus - - const: core - - iommus: - maxItems: 2 - - interconnects: - maxItems: 1 - - interconnect-names: - maxItems: 1 - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - $ref: /schemas/display/msm/dpu-common.yaml# - description: Node containing the properties of DPU. - unevaluatedProperties: false - - properties: - compatible: - items: - - const: qcom,qcm2290-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display AXI clock from gcc - - description: Display AHB clock from dispcc - - description: Display core clock from dispcc - - description: Display lut clock from dispcc - - description: Display vsync clock from dispcc - - clock-names: - items: - - const: bus - - const: iface - - const: core - - const: lut - - const: vsync - -unevaluatedProperties: false - -examples: - - | - #include - #include - #include - #include - #include - - mdss: mdss@5e00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,qcm2290-mdss"; - reg = <0x05e00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc MDSS_GDSC>; - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - interrupts = ; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; - - iommus = <&apps_smmu 0x420 0x2>, - <&apps_smmu 0x421 0x0>; - ranges; - - mdss_mdp: display-controller@5e01000 { - compatible = "qcom,qcm2290-dpu"; - reg = <0x05e01000 0x8f000>, - <0x05eb0000 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", "iface", "core", "lut", "vsync"; - - operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmpd QCM2290_VDDCX>; - - interrupt-parent = <&mdss>; - interrupts = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml new file mode 100644 index 000000000000..a7b382f01b56 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for QCM2290 target + +maintainers: + - Loic Poulain + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,qcm2290-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display AXI clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock from dispcc + - description: Display lut clock from dispcc + - description: Display vsync clock from dispcc + + clock-names: + items: + - const: bus + - const: iface + - const: core + - const: lut + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml new file mode 100644 index 000000000000..419989d6279e --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QCM220 Display MDSS + +maintainers: + - Loic Poulain + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS + are mentioned for QCM2290 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,qcm2290-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 2 + + interconnects: + maxItems: 1 + + interconnect-names: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,qcm2290-dpu + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + mdss@5e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qcm2290-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + }; +... -- cgit From 4b32e46638c2969c1e2b50b02dd2a23bf7033052 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:24 +0300 Subject: dt-bindings: display/msm: add missing device nodes to mdss-* schemas Add missing device nodes (DSI, PHYs, DP/eDP) to the existing MDSS schemas. Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508391/ Link: https://lore.kernel.org/r/20221024164225.3236654-12-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/qcom,msm8998-mdss.yaml | 153 +++++++++++ .../bindings/display/msm/qcom,qcm2290-mdss.yaml | 81 ++++++ .../bindings/display/msm/qcom,sc7180-mdss.yaml | 179 +++++++++++++ .../bindings/display/msm/qcom,sc7280-mdss.yaml | 292 +++++++++++++++++++++ .../bindings/display/msm/qcom,sdm845-mdss.yaml | 153 +++++++++++ 5 files changed, 858 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml index 192a832ef808..cf52ff77a41a 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml @@ -43,11 +43,24 @@ patternProperties: compatible: const: qcom,msm8998-dpu + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm-8998 + unevaluatedProperties: false examples: - | #include + #include #include #include @@ -111,5 +124,145 @@ examples: }; }; }; + + dsi@c994000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0c994000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd MSM8998_VDDCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@c994400 { + compatible = "qcom,dsi-phy-10nm-8998"; + reg = <0x0c994400 0x200>, + <0x0c994600 0x280>, + <0x0c994a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + vdds-supply = <&pm8998_l1>; + }; + + dsi@c996000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0c996000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_BYTE1_INTF_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd MSM8998_VDDCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@c996400 { + compatible = "qcom,dsi-phy-10nm-8998"; + reg = <0x0c996400 0x200>, + <0x0c996600 0x280>, + <0x0c996a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + vdds-supply = <&pm8998_l1>; + }; }; ... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml index 419989d6279e..d6f043a4b08d 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -49,12 +49,25 @@ patternProperties: compatible: const: qcom,qcm2290-dpu + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-ctrl-6g-qcm2290 + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-14nm-2290 + unevaluatedProperties: false examples: - | #include #include + #include #include #include #include @@ -113,5 +126,73 @@ examples: }; }; }; + + dsi@5e94000 { + compatible = "qcom,dsi-ctrl-6g-qcm2290"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + vcca-supply = <&vreg_dsi_phy>; + }; }; ... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml index 103cfd60c61b..13e396d61a51 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml @@ -49,12 +49,31 @@ patternProperties: compatible: const: qcom,sc7180-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7180-dp + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm + unevaluatedProperties: false examples: - | #include #include + #include #include #include #include @@ -121,5 +140,165 @@ examples: }; }; }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + phys = <&dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + displayport-controller@ae90000 { + compatible = "qcom,sc7180-dp"; + + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; }; ... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml index d4ac2d5d13fb..a3de1744ba11 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml @@ -48,12 +48,39 @@ patternProperties: compatible: const: qcom,sc7280-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7280-dp + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^edp@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7280-edp + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + enum: + - qcom,sc7280-dsi-phy-7nm + - qcom,sc7280-edp-phy + unevaluatedProperties: false examples: - | #include #include + #include #include #include #include @@ -124,6 +151,271 @@ examples: remote-endpoint = <&edp_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + phys = <&mdss_dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi_phy: phy@ae94400 { + compatible = "qcom,sc7280-dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + vdds-supply = <&vreg_dsi_supply>; + }; + + edp@aea0000 { + compatible = "qcom,sc7280-edp"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hot_plug_det>; + + reg = <0xaea0000 0x200>, + <0xaea0200 0x200>, + <0xaea0400 0xc00>, + <0xaea1000 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <14>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; + + phys = <&mdss_edp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&edp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dpu_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_edp_out: endpoint { }; + }; + }; + + edp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_edp_phy: phy@aec2a00 { + compatible = "qcom,sc7280-edp-phy"; + + reg = <0xaec2a00 0x19c>, + <0xaec2200 0xa0>, + <0xaec2600 0xa0>, + <0xaec2000 0x1c0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_EDP_CLKREF_EN>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + }; + + displayport-controller@ae90000 { + compatible = "qcom,sc7280-dp"; + + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml index 47fe66f4da54..31ca6f99fc22 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml @@ -47,12 +47,25 @@ patternProperties: compatible: const: qcom,sdm845-dpu + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm + unevaluatedProperties: false examples: - | #include #include + #include #include #include @@ -113,5 +126,145 @@ examples: }; }; }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; }; ... -- cgit From 4e78a58ad34e8d7c7fbd26205056d3baaf0b5e98 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 24 Oct 2022 19:42:25 +0300 Subject: dt-bindings: display/msm: add support for the display on SM8250 Add DPU and MDSS schemas to describe MDSS and DPU blocks on the Qualcomm SM8250 platform. Reviewed-by: Rob Herring Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/508397/ Link: https://lore.kernel.org/r/20221024164225.3236654-13-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/mdss-common.yaml | 4 +- .../bindings/display/msm/qcom,sm8250-dpu.yaml | 92 ++++++ .../bindings/display/msm/qcom,sm8250-mdss.yaml | 330 +++++++++++++++++++++ 3 files changed, 424 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml index 2a476bd0215e..27d7242657b2 100644 --- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml @@ -27,11 +27,11 @@ properties: clocks: minItems: 2 - maxItems: 3 + maxItems: 4 clock-names: minItems: 2 - maxItems: 3 + maxItems: 4 interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml new file mode 100644 index 000000000000..9ff8a265c85f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 Display DPU + +maintainers: + - Dmitry Baryshkov + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8250-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display hf axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + display-controller@ae01000 { + compatible = "qcom,sm8250-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml new file mode 100644 index 000000000000..0d3be5386b3f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml @@ -0,0 +1,330 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 Display MDSS + +maintainers: + - Dmitry Baryshkov + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SM8250 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm8250-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: nrt_bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8250-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-7nm + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + #include + + display-subsystem@ae00000 { + compatible = "qcom,sm8250-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8250-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... -- cgit From 2387771f45042ca05eeeeca2e802a65910c499cf Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Sat, 24 Sep 2022 15:18:59 +0300 Subject: dt-bindings: display/msm: Add QCM2290 DSI phy QCM2290 platform uses the 14nm DSI PHY driver. Signed-off-by: Loic Poulain Signed-off-by: Dmitry Baryshkov Acked-by: Rob Herring Patchwork: https://patchwork.freedesktop.org/patch/504579/ Link: https://lore.kernel.org/r/20220924121900.222711-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov --- Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 1342d74ecfe0..819de5ce0bc9 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - qcom,dsi-phy-14nm + - qcom,dsi-phy-14nm-2290 - qcom,dsi-phy-14nm-660 - qcom,dsi-phy-14nm-8953 -- cgit From bac4ccce72f750ff015994d85fbe622df90d60f3 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 3 Nov 2022 02:13:02 +0300 Subject: dt-bindings: display/msm/dsi-controller-main: allow defining opp-table Allow defining DSI OPP table inside the DSI controller node. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Dmitry Baryshkov --- Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 3b609c19e0bc..c37dd9503da0 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -80,6 +80,9 @@ properties: operating-points-v2: true + opp-table: + type: object + ports: $ref: "/schemas/graph.yaml#/properties/ports" description: | -- cgit From c54155622c29297560a0840640e2d7431add2cb3 Mon Sep 17 00:00:00 2001 From: Bryan O'Donoghue Date: Wed, 7 Sep 2022 01:00:55 +0100 Subject: dt-bindings: msm: dsi-controller-main: Drop redundant phy-names Adding in msm8939 which is based msm8916 dtsi I stumbled across a binding check complaining about the phy name for msm8916 which we were reusing for msm8939. The currently inconsistent upstream dtsi naming of "dsi" and "dsi-phy" is not captured in the yaml for this driver. The driver however doesn't care about the name of DSI phy, hence the yaml check is redundant. Both Krzysztof and Rob suggested we could drop the phy-names entirely if it really isn't a dependency. So, drop the inconsistent and unnecessary phy-names field from the yaml. Signed-off-by: Bryan O'Donoghue Signed-off-by: Dmitry Baryshkov --- Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index c37dd9503da0..f2c143730a55 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -49,6 +49,7 @@ properties: maxItems: 1 phy-names: + deprecated: true const: dsi "#address-cells": true @@ -134,7 +135,6 @@ required: - clocks - clock-names - phys - - phy-names - assigned-clocks - assigned-clock-parents - power-domains -- cgit From b93bdff44a85777c97d33159a2b4bff08f4d0e07 Mon Sep 17 00:00:00 2001 From: Adam Skladowski Date: Thu, 24 Nov 2022 01:16:31 +0100 Subject: dt-bindings: display/msm: add support for SM6115 Add DPU and MDSS schemas to describe MDSS and DPU blocks on the Qualcomm SM6115 platform. Configuration for DSI/PHY is shared with QCM2290 so compatibles are reused. Lack of dsi phy supply in example is intended due to fact on qcm2290, sm6115 and sm6125 this phy is supplied via power domain, not regulator. Signed-off-by: Adam Skladowski Reviewed-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/512872/ Link: https://lore.kernel.org/r/20221124001708.25720-2-a39.skl@gmail.com Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/qcom,sm6115-dpu.yaml | 94 +++++++++++ .../bindings/display/msm/qcom,sm6115-mdss.yaml | 182 +++++++++++++++++++++ 2 files changed, 276 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml new file mode 100644 index 000000000000..4a39a3031409 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SM6115 target + +maintainers: + - Dmitry Baryshkov + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm6115-dpu + + reg: + items: + - description: MDP register set + - description: VBIF register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display AXI + - description: Display AHB + - description: Display core + - description: Display lut + - description: Display rotator + - description: Display vsync + + clock-names: + items: + - const: bus + - const: iface + - const: core + - const: lut + - const: rot + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + display-controller@5e01000 { + compatible = "qcom,sm6115-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "rot", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml new file mode 100644 index 000000000000..a86d7f53fa84 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 Display MDSS + +maintainers: + - Dmitry Baryshkov + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS + are mentioned for SM6115 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm6115-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + iommus: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6115-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-ctrl-6g-qcm2290 + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-14nm-2290 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + mdss@5e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sm6115-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6115-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "rot", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,dsi-ctrl-6g-qcm2290"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + phys = <&dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + }; + }; +... -- cgit