From b331b8ef86f07276a9acb78f10bd5538a29d5546 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Sun, 25 Apr 2021 23:41:18 -0300 Subject: dt-bindings: net: convert rockchip-dwmac to json-schema Convert Rockchip dwmac controller dt-bindings to YAML. Signed-off-by: Ezequiel Garcia Reviewed-by: David Wu Signed-off-by: David S. Miller --- .../devicetree/bindings/net/rockchip-dwmac.txt | 76 ------------- .../devicetree/bindings/net/rockchip-dwmac.yaml | 120 +++++++++++++++++++++ 2 files changed, 120 insertions(+), 76 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/rockchip-dwmac.txt create mode 100644 Documentation/devicetree/bindings/net/rockchip-dwmac.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt deleted file mode 100644 index 3b71da7e8742..000000000000 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ /dev/null @@ -1,76 +0,0 @@ -Rockchip SoC RK3288 10/100/1000 Ethernet driver(GMAC) - -The device node has following properties. - -Required properties: - - compatible: should be "rockchip,-gamc" - "rockchip,px30-gmac": found on PX30 SoCs - "rockchip,rk3128-gmac": found on RK312x SoCs - "rockchip,rk3228-gmac": found on RK322x SoCs - "rockchip,rk3288-gmac": found on RK3288 SoCs - "rockchip,rk3328-gmac": found on RK3328 SoCs - "rockchip,rk3366-gmac": found on RK3366 SoCs - "rockchip,rk3368-gmac": found on RK3368 SoCs - "rockchip,rk3399-gmac": found on RK3399 SoCs - "rockchip,rv1108-gmac": found on RV1108 SoCs - - reg: addresses and length of the register sets for the device. - - interrupts: Should contain the GMAC interrupts. - - interrupt-names: Should contain the interrupt names "macirq". - - rockchip,grf: phandle to the syscon grf used to control speed and mode. - - clocks: <&cru SCLK_MAC>: clock selector for main clock, from PLL or PHY. - <&cru SCLK_MAC_PLL>: PLL clock for SCLK_MAC - <&cru SCLK_MAC_RX>: clock gate for RX - <&cru SCLK_MAC_TX>: clock gate for TX - <&cru SCLK_MACREF>: clock gate for RMII referce clock - <&cru SCLK_MACREF_OUT> clock gate for RMII reference clock output - <&cru ACLK_GMAC>: AXI clock gate for GMAC - <&cru PCLK_GMAC>: APB clock gate for GMAC - - clock-names: One name for each entry in the clocks property. - - phy-mode: See ethernet.txt file in the same directory. - - pinctrl-names: Names corresponding to the numbered pinctrl states. - - pinctrl-0: pin-control mode. can be <&rgmii_pins> or <&rmii_pins>. - - clock_in_out: For RGMII, it must be "input", means main clock(125MHz) - is not sourced from SoC's PLL, but input from PHY; For RMII, "input" means - PHY provides the reference clock(50MHz), "output" means GMAC provides the - reference clock. - - snps,reset-gpio gpio number for phy reset. - - snps,reset-active-low boolean flag to indicate if phy reset is active low. - - assigned-clocks: main clock, should be <&cru SCLK_MAC>; - - assigned-clock-parents = parent of main clock. - can be <&ext_gmac> or <&cru SCLK_MAC_PLL>. - -Optional properties: - - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default. - - rx_delay: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default. - - phy-supply: phandle to a regulator if the PHY needs one - -Example: - -gmac: ethernet@ff290000 { - compatible = "rockchip,rk3288-gmac"; - reg = <0xff290000 0x10000>; - interrupts = ; - interrupt-names = "macirq"; - rockchip,grf = <&grf>; - clocks = <&cru SCLK_MAC>, - <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, - <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, - <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; - clock-names = "stmmaceth", - "mac_clk_rx", "mac_clk_tx", - "clk_mac_ref", "clk_mac_refout", - "aclk_mac", "pclk_mac"; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins /*&rmii_pins*/>; - - clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; - snps,reset-active-low; - - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - tx_delay = <0x30>; - rx_delay = <0x10>; - -}; diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml new file mode 100644 index 000000000000..5acddb6171bf --- /dev/null +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/rockchip-dwmac.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Rockchip 10/100/1000 Ethernet driver(GMAC) + +maintainers: + - David Wu + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - rockchip,px30-gmac + - rockchip,rk3128-gmac + - rockchip,rk3228-gmac + - rockchip,rk3288-gmac + - rockchip,rk3328-gmac + - rockchip,rk3366-gmac + - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rv1108-gmac + required: + - compatible + +allOf: + - $ref: "snps,dwmac.yaml#" + +properties: + compatible: + items: + - enum: + - rockchip,px30-gmac + - rockchip,rk3128-gmac + - rockchip,rk3228-gmac + - rockchip,rk3288-gmac + - rockchip,rk3328-gmac + - rockchip,rk3366-gmac + - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rv1108-gmac + + clocks: + minItems: 5 + maxItems: 8 + + clock-names: + contains: + enum: + - stmmaceth + - mac_clk_tx + - mac_clk_rx + - aclk_mac + - pclk_mac + - clk_mac_ref + - clk_mac_refout + - clk_mac_speed + + clock_in_out: + description: + For RGMII, it must be "input", means main clock(125MHz) + is not sourced from SoC's PLL, but input from PHY. + For RMII, "input" means PHY provides the reference clock(50MHz), + "output" means GMAC provides the reference clock. + $ref: /schemas/types.yaml#/definitions/string + enum: [input, output] + + rockchip,grf: + description: The phandle of the syscon node for the general register file. + $ref: /schemas/types.yaml#/definitions/phandle + + tx_delay: + description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default. + $ref: /schemas/types.yaml#/definitions/uint32 + + rx_delay: + description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default. + $ref: /schemas/types.yaml#/definitions/uint32 + + phy-supply: + description: PHY regulator + +required: + - compatible + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + + gmac: ethernet@ff290000 { + compatible = "rockchip,rk3288-gmac"; + reg = <0xff290000 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, + <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + + rockchip,grf = <&grf>; + phy-mode = "rgmii"; + clock_in_out = "input"; + tx_delay = <0x30>; + rx_delay = <0x10>; + }; -- cgit