From 3103405f0a570b5472560ed094e562cba9d33028 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 12 Aug 2016 18:18:58 -0700 Subject: dt-binding: remoteproc: Introduce Qualcomm WCNSS loader binding The document defines the binding for a component that loads firmware for and boots the Qualcomm WCNSS core. Acked-by: Rob Herring Signed-off-by: Bjorn Andersson Signed-off-by: Bjorn Andersson --- .../bindings/remoteproc/qcom,wcnss-pil.txt | 132 +++++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt new file mode 100644 index 000000000000..0d2361ebe3d7 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt @@ -0,0 +1,132 @@ +Qualcomm WCNSS Peripheral Image Loader + +This document defines the binding for a component that loads and boots firmware +on the Qualcomm WCNSS core. + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,riva-pil", + "qcom,pronto-v1-pil", + "qcom,pronto-v2-pil" + +- reg: + Usage: required + Value type: + Definition: must specify the base address and size of the CCU, DXE and + PMU register blocks + +- reg-names: + Usage: required + Value type: + Definition: must be "ccu", "dxe", "pmu" + +- interrupts-extended: + Usage: required + Value type: + Definition: must list the watchdog and fatal IRQs and may specify the + ready, handover and stop-ack IRQs + +- interrupt-names: + Usage: required + Value type: + Definition: should be "wdog", "fatal", optionally followed by "ready", + "handover", "stop-ack" + +- vddmx-supply: +- vddcx-supply: +- vddpx-supply: + Usage: required + Value type: + Definition: reference to the regulators to be held on behalf of the + booting of the WCNSS core + +- qcom,smem-states: + Usage: optional + Value type: + Definition: reference to the SMEM state used to indicate to WCNSS that + it should shut down + +- qcom,smem-state-names: + Usage: optional + Value type: + Definition: should be "stop" + +- memory-region: + Usage: required + Value type: + Definition: reference to reserved-memory node for the remote processor + see ../reserved-memory/reserved-memory.txt + += SUBNODES +A single subnode of the WCNSS PIL describes the attached rf module and its +resource dependencies. + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,wcn3620", + "qcom,wcn3660", + "qcom,wcn3680" + +- clocks: + Usage: required + Value type: + Definition: should specify the xo clock and optionally the rf clock + +- clock-names: + Usage: required + Value type: + Definition: should be "xo", optionally followed by "rf" + +- vddxo-supply: +- vddrfa-supply: +- vddpa-supply: +- vdddig-supply: + Usage: required + Value type: + Definition: reference to the regulators to be held on behalf of the + booting of the WCNSS core + += EXAMPLE +The following example describes the resources needed to boot control the WCNSS, +with attached WCN3680, as it is commonly found on MSM8974 boards. + +pronto@fb204000 { + compatible = "qcom,pronto-v2-pil"; + reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + interrupts-extended = <&intc 0 149 1>, + <&wcnss_smp2p_slave 0 0>, + <&wcnss_smp2p_slave 1 0>, + <&wcnss_smp2p_slave 2 0>, + <&wcnss_smp2p_slave 3 0>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + memory-region = <&wcnss_region>; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + iris { + compatible = "qcom,wcn3680"; + + clocks = <&rpmcc RPM_CXO_CLK_SRC>, <&rpmcc RPM_CXO_A2>; + clock-names = "xo", "rf"; + + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; +}; -- cgit From 433c0e04bc06da6d049c691a9ef238d61edb841c Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Sun, 2 Oct 2016 17:46:38 -0700 Subject: remoteproc: Split driver and consumer dereferencing In order to be able to lock a rproc driver implementations only when used by a client, we must differ between the dereference operation of a client and the implementation itself. This patch brings no functional change. Signed-off-by: Bjorn Andersson --- Documentation/remoteproc.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/remoteproc.txt b/Documentation/remoteproc.txt index ef0219fa4bb4..f07597482351 100644 --- a/Documentation/remoteproc.txt +++ b/Documentation/remoteproc.txt @@ -101,9 +101,9 @@ int dummy_rproc_example(struct rproc *my_rproc) On success, the new rproc is returned, and on failure, NULL. Note: _never_ directly deallocate @rproc, even if it was not registered - yet. Instead, when you need to unroll rproc_alloc(), use rproc_put(). + yet. Instead, when you need to unroll rproc_alloc(), use rproc_free(). - void rproc_put(struct rproc *rproc) + void rproc_free(struct rproc *rproc) - Free an rproc handle that was allocated by rproc_alloc. This function essentially unrolls rproc_alloc(), by decrementing the rproc's refcount. It doesn't directly free rproc; that would happen @@ -131,7 +131,7 @@ int dummy_rproc_example(struct rproc *my_rproc) has completed successfully. After rproc_del() returns, @rproc is still valid, and its - last refcount should be decremented by calling rproc_put(). + last refcount should be decremented by calling rproc_free(). Returns 0 on success and -EINVAL if @rproc isn't valid. -- cgit