From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/alpha/kernel/sys_eb64p.c | 256 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 256 insertions(+) create mode 100644 arch/alpha/kernel/sys_eb64p.c (limited to 'arch/alpha/kernel/sys_eb64p.c') diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c new file mode 100644 index 000000000000..61a79c354f0b --- /dev/null +++ b/arch/alpha/kernel/sys_eb64p.c @@ -0,0 +1,256 @@ +/* + * linux/arch/alpha/kernel/sys_eb64p.c + * + * Copyright (C) 1995 David A Rusling + * Copyright (C) 1996 Jay A Estabrook + * Copyright (C) 1998, 1999 Richard Henderson + * + * Code supporting the EB64+ and EB66. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "proto.h" +#include "irq_impl.h" +#include "pci_impl.h" +#include "machvec_impl.h" + + +/* Note mask bit is true for DISABLED irqs. */ +static unsigned int cached_irq_mask = -1; + +static inline void +eb64p_update_irq_hw(unsigned int irq, unsigned long mask) +{ + outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26)); +} + +static inline void +eb64p_enable_irq(unsigned int irq) +{ + eb64p_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq)); +} + +static void +eb64p_disable_irq(unsigned int irq) +{ + eb64p_update_irq_hw(irq, cached_irq_mask |= 1 << irq); +} + +static unsigned int +eb64p_startup_irq(unsigned int irq) +{ + eb64p_enable_irq(irq); + return 0; /* never anything pending */ +} + +static void +eb64p_end_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + eb64p_enable_irq(irq); +} + +static struct hw_interrupt_type eb64p_irq_type = { + .typename = "EB64P", + .startup = eb64p_startup_irq, + .shutdown = eb64p_disable_irq, + .enable = eb64p_enable_irq, + .disable = eb64p_disable_irq, + .ack = eb64p_disable_irq, + .end = eb64p_end_irq, +}; + +static void +eb64p_device_interrupt(unsigned long vector, struct pt_regs *regs) +{ + unsigned long pld; + unsigned int i; + + /* Read the interrupt summary registers */ + pld = inb(0x26) | (inb(0x27) << 8); + + /* + * Now, for every possible bit set, work through + * them and call the appropriate interrupt handler. + */ + while (pld) { + i = ffz(~pld); + pld &= pld - 1; /* clear least bit set */ + + if (i == 5) { + isa_device_interrupt(vector, regs); + } else { + handle_irq(16 + i, regs); + } + } +} + +static void __init +eb64p_init_irq(void) +{ + long i; + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET) + /* + * CABRIO SRM may not set variation correctly, so here we test + * the high word of the interrupt summary register for the RAZ + * bits, and hope that a true EB64+ would read all ones... + */ + if (inw(0x806) != 0xffff) { + extern struct alpha_machine_vector cabriolet_mv; + + printk("Detected Cabriolet: correcting HWRPB.\n"); + + hwrpb->sys_variation |= 2L << 10; + hwrpb_update_checksum(hwrpb); + + alpha_mv = cabriolet_mv; + alpha_mv.init_irq(); + return; + } +#endif /* GENERIC */ + + outb(0xff, 0x26); + outb(0xff, 0x27); + + init_i8259a_irqs(); + + for (i = 16; i < 32; ++i) { + irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL; + irq_desc[i].handler = &eb64p_irq_type; + } + + common_init_isa_dma(); + setup_irq(16+5, &isa_cascade_irqaction); +} + +/* + * PCI Fixup configuration. + * + * There are two 8 bit external summary registers as follows: + * + * Summary @ 0x26: + * Bit Meaning + * 0 Interrupt Line A from slot 0 + * 1 Interrupt Line A from slot 1 + * 2 Interrupt Line B from slot 0 + * 3 Interrupt Line B from slot 1 + * 4 Interrupt Line C from slot 0 + * 5 Interrupt line from the two ISA PICs + * 6 Tulip + * 7 NCR SCSI + * + * Summary @ 0x27 + * Bit Meaning + * 0 Interrupt Line C from slot 1 + * 1 Interrupt Line D from slot 0 + * 2 Interrupt Line D from slot 1 + * 3 RAZ + * 4 RAZ + * 5 RAZ + * 6 RAZ + * 7 RAZ + * + * The device to slot mapping looks like: + * + * Slot Device + * 5 NCR SCSI controller + * 6 PCI on board slot 0 + * 7 PCI on board slot 1 + * 8 Intel SIO PCI-ISA bridge chip + * 9 Tulip - DECchip 21040 Ethernet controller + * + * + * This two layered interrupt approach means that we allocate IRQ 16 and + * above for PCI interrupts. The IRQ relates to which bit the interrupt + * comes in on. This makes interrupt processing much easier. + */ + +static int __init +eb64p_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static char irq_tab[5][5] __initdata = { + /*INT INTA INTB INTC INTD */ + {16+7, 16+7, 16+7, 16+7, 16+7}, /* IdSel 5, slot ?, ?? */ + {16+0, 16+0, 16+2, 16+4, 16+9}, /* IdSel 6, slot ?, ?? */ + {16+1, 16+1, 16+3, 16+8, 16+10}, /* IdSel 7, slot ?, ?? */ + { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */ + {16+6, 16+6, 16+6, 16+6, 16+6}, /* IdSel 9, TULIP */ + }; + const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5; + return COMMON_TABLE_LOOKUP; +} + + +/* + * The System Vector + */ + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P) +struct alpha_machine_vector eb64p_mv __initmv = { + .vector_name = "EB64+", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_APECS_IO, + .machine_check = apecs_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, + + .nr_irqs = 32, + .device_interrupt = eb64p_device_interrupt, + + .init_arch = apecs_init_arch, + .init_irq = eb64p_init_irq, + .init_rtc = common_init_rtc, + .init_pci = common_init_pci, + .kill_arch = NULL, + .pci_map_irq = eb64p_map_irq, + .pci_swizzle = common_swizzle, +}; +ALIAS_MV(eb64p) +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66) +struct alpha_machine_vector eb66_mv __initmv = { + .vector_name = "EB66", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_LCA_IO, + .machine_check = lca_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, + + .nr_irqs = 32, + .device_interrupt = eb64p_device_interrupt, + + .init_arch = lca_init_arch, + .init_irq = eb64p_init_irq, + .init_rtc = common_init_rtc, + .init_pci = common_init_pci, + .pci_map_irq = eb64p_map_irq, + .pci_swizzle = common_swizzle, +}; +ALIAS_MV(eb66) +#endif -- cgit