From ff82009fcc6ace774570107750f5af91c9081b0a Mon Sep 17 00:00:00 2001 From: Drew Fustini Date: Wed, 10 Jun 2020 13:02:58 +0200 Subject: ARM: dts: am33xx-l4: add gpio-ranges Add gpio-ranges properties to the gpio controller nodes. These gpio-ranges were created based on "Table 9-10. CONTROL_MODULE REGISTERS" in the "AM335x Technical Reference Manual" [0] and "Table 4-2. Pin Attributes" in the "AM335x Sitara Processor datasheet" [1]. A csv file with this data is available for reference [2]. These mappings are valid for all SoC's that are using am33xx-l4.dtsi. In addition, the only TI AM33xx parts that actually exist are [0]: AM3351, AM3352, AM3354, AM3356, AM3357, AM3358, AM3359 These gpio-ranges properties should be added as they describe the relationship between a gpio line and pin control register that exists in the hardware. For example, GPMC_A0 pin has mode 7 which is labeled gpio1_16. conf_gpmc_a0 register is at offset 840h which makes it pin 16. [0] https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf [1] http://www.ti.com/lit/ds/symlink/am3358.pdf [2] https://gist.github.com/pdp7/6ffaddc8867973c1c3e8612cfaf72020 [3] http://www.ti.com/processors/sitara-arm/am335x-cortex-a8/overview.html Signed-off-by: Drew Fustini Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx-l4.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch/arm/boot/dts/am33xx-l4.dtsi') diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 7ff11d6bf0f2..2c1ec066caeb 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -151,6 +151,18 @@ gpio0: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 82 8>, + <&am33xx_pinmux 8 52 4>, + <&am33xx_pinmux 12 94 4>, + <&am33xx_pinmux 16 71 2>, + <&am33xx_pinmux 18 135 1>, + <&am33xx_pinmux 19 108 2>, + <&am33xx_pinmux 21 73 1>, + <&am33xx_pinmux 22 8 2>, + <&am33xx_pinmux 26 10 2>, + <&am33xx_pinmux 28 74 1>, + <&am33xx_pinmux 29 81 1>, + <&am33xx_pinmux 30 28 2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1296,6 +1308,10 @@ gpio1: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 0 8>, + <&am33xx_pinmux 8 90 4>, + <&am33xx_pinmux 12 12 16>, + <&am33xx_pinmux 28 30 4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1698,6 +1714,9 @@ gpio2: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 34 18>, + <&am33xx_pinmux 18 77 4>, + <&am33xx_pinmux 22 56 10>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1731,6 +1750,11 @@ gpio3: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 66 5>, + <&am33xx_pinmux 5 98 2>, + <&am33xx_pinmux 7 75 2>, + <&am33xx_pinmux 13 141 1>, + <&am33xx_pinmux 14 100 8>; gpio-controller; #gpio-cells = <2>; interrupt-controller; -- cgit