From efedc4893b0549b83ee678e428e18e4fa505bc4c Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Thu, 14 Jul 2016 16:50:17 +0200 Subject: ARM: dts: at91: move isi definition to at91sam9g25ek The ISI is only present on the at91sam9g25, move the definition to the at91sam9g25ek board dts to avoid warnings. Solves the following warning for other 9x5ek boards: Warning (unit_address_vs_reg): Node /ahb/apb/isi@f8048000 has a unit name, but no reg property Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91sam9x5ek.dtsi | 33 --------------------------------- 1 file changed, 33 deletions(-) (limited to 'arch/arm/boot/dts/at91sam9x5ek.dtsi') diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 52425a4ca97e..696b8ba064a6 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -60,18 +60,6 @@ status = "okay"; }; - isi: isi@f8048000 { - status = "disabled"; - port { - isi_0: endpoint@0 { - remote-endpoint = <&ov2640_0>; - bus-width = <8>; - vsync-active = <1>; - hsync-active = <1>; - }; - }; - }; - i2c0: i2c@f8010000 { status = "okay"; @@ -79,27 +67,6 @@ compatible = "wm8731"; reg = <0x1a>; }; - - ov2640: camera@0x30 { - compatible = "ovti,ov2640"; - reg = <0x30>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; - resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; - pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; - clocks = <&pck0>; - clock-names = "xvclk"; - assigned-clocks = <&pck0>; - assigned-clock-rates = <25000000>; - status = "disabled"; - - port { - ov2640_0: endpoint { - remote-endpoint = <&isi_0>; - bus-width = <8>; - }; - }; - }; }; adc0: adc@f804c000 { -- cgit