From 59f0ce1a3ebb9288fc8c1400aa503e923621161e Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 23 May 2016 16:38:00 -0700 Subject: ARM: dts: Enable SRAB switch and GMACs on 5301x DTS Add the Switch Register Access Block which is a special piece of hardware allowing us to perform indirect read/writes towards the integrated BCM5301X Ethernet switch. We also add the 4 Gigabit MAC Device Tree nodes within the brcm,bus-axi bus node to get proper binding between the BCMA instantiated core and the Device Tree nodes. We will need that to be able to reference Ethernet Device Tree nodes in a future patch adding the switch ports layout. Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm/boot/dts/bcm5301x.dtsi') diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 7d4d29bf0ed3..9fb565841004 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -239,6 +239,22 @@ status = "disabled"; }; }; + + gmac0: ethernet@24000 { + reg = <0x24000 0x800>; + }; + + gmac1: ethernet@25000 { + reg = <0x25000 0x800>; + }; + + gmac2: ethernet@26000 { + reg = <0x26000 0x800>; + }; + + gmac3: ethernet@27000 { + reg = <0x27000 0x800>; + }; }; lcpll0: lcpll0@1800c100 { @@ -260,6 +276,17 @@ "sata2"; }; + srab: srab@18007000 { + compatible = "brcm,bcm5301x-srab"; + reg = <0x18007000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + /* ports are defined in board DTS */ + }; + nand: nand@18028000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; -- cgit