From af38a00378247a3dc29acf7b482586442b71fafb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 16 Apr 2014 14:53:19 -0300 Subject: ARM: dts: imx27: Place the usb phy nodes in the board dts files It is not a good approach to have the USB PHY nodes inside imx27.dtsi since the USB PHYs on mx27 are not internal to the SoC. Place the USB PHY nodes in the board dts files instead. Also, each board may have a different clock source for the USB PHY, so do not hardcode it. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts') diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index 8b4181b72596..0875327bea74 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -37,6 +37,20 @@ }; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy2: usbphy@2 { + compatible = "usb-nop-xceiv"; + reg = <0>; + vcc-supply = <®_5v0>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &cspi1 { @@ -268,14 +282,11 @@ dr_mode = "host"; phy_type = "ulpi"; vbus-supply = <®_5v0>; + fsl,usbphy = <&usbphy2>; disable-over-current; status = "okay"; }; -&usbphy2 { - vcc-supply = <®_5v0>; -}; - &weim { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_weim>; -- cgit