From b2da116cbe46f55d34bcac3ae69206aeda5f11e1 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 4 Aug 2016 16:24:38 +0200 Subject: ARM: dts: add the core module clocks to Integrator/CP This adds the core and memory clocks to the Integrator/CP device tree. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/integratorcp.dts | 37 +++++++++++++++++++++++++++---------- 1 file changed, 27 insertions(+), 10 deletions(-) (limited to 'arch/arm/boot/dts/integratorcp.dts') diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index d43f15b4f79a..e8299590bb6a 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -58,20 +58,37 @@ core-module@10000000 { /* 24 MHz chrystal on the core module */ - xtal24mhz: xtal24mhz@24M { + cm24mhz: cm24mhz@24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - /* - * External oscillator on the core module, usually used - * to drive video circuitry. Driven from the 24MHz clock. - */ - auxosc: cm_aux_osc@25M { + /* Oscillator on the core module, clocks the CPU core */ + cmcore: cmosc@24M { + compatible = "arm,syscon-icst525-integratorcp-cm-core"; + #clock-cells = <0>; + lock-offset = <0x14>; + vco-offset = <0x08>; + clocks = <&cm24mhz>; + }; + + /* Oscillator on the core module, clocks the memory bus */ + cmmem: cmosc@24M { + compatible = "arm,syscon-icst525-integratorcp-cm-mem"; + #clock-cells = <0>; + lock-offset = <0x14>; + vco-offset = <0x08>; + clocks = <&cm24mhz>; + }; + + /* Auxilary oscillator on the core module, clocks the CLCD */ + auxosc: auxosc@24M { + compatible = "arm,syscon-icst525"; #clock-cells = <0>; - compatible = "arm,integrator-cm-auxosc"; - clocks = <&xtal24mhz>; + lock-offset = <0x14>; + vco-offset = <0x1c>; + clocks = <&cm24mhz>; }; /* The KMI clock is the 24 MHz oscillator divided to 8MHz */ @@ -80,7 +97,7 @@ compatible = "fixed-factor-clock"; clock-div = <3>; clock-mult = <1>; - clocks = <&xtal24mhz>; + clocks = <&cm24mhz>; }; /* The timer clock is the 24 MHz oscillator divided to 1MHz */ @@ -89,7 +106,7 @@ compatible = "fixed-factor-clock"; clock-div = <24>; clock-mult = <1>; - clocks = <&xtal24mhz>; + clocks = <&cm24mhz>; }; }; -- cgit From e3f617602103ef674aec417d52f0cff145fc0599 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 29 Aug 2016 11:30:18 +0200 Subject: ARM: integrator: move CP CLCD display to DTS The Integrator/CP CLCD VGA display can now be registered fully from the device tree. Delete the board file code and add the display definition to the DTS. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/integratorcp.dts | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/integratorcp.dts') diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index e8299590bb6a..03d8423d3a11 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -226,7 +226,42 @@ reg = <0xC0000000 0x1000>; interrupts = <22>; clocks = <&auxosc>, <&pclk>; - clock-names = "clcd", "apb_pclk"; + clock-names = "clcdclk", "apb_pclk"; + + port { + /* + * The VGA connected is implemented with a + * THS8134A triple DAC that can be run in 24bit + * or 16bit RGB mode. + */ + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <1 7 13>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + /* Standard 640x480 VGA timings */ + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <48>; + hfront-porch = <16>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <33>; + vfront-porch = <10>; + vsync-len = <2>; + }; + }; }; }; }; -- cgit