From 7045ff5a5322fa7461d7255c15ad1896bd659440 Mon Sep 17 00:00:00 2001
From: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Date: Tue, 17 Sep 2013 12:44:33 -0600
Subject: ARM: kirkwood: Move the nand node under the mbus node

There should be no nodes that are not children of the mbus. Move
the nand node under the mbus, and rework the board .dts files
to use an & reference to the nand node.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
 arch/arm/boot/dts/kirkwood-dnskw.dtsi | 76 +++++++++++++++++------------------
 1 file changed, 38 insertions(+), 38 deletions(-)

(limited to 'arch/arm/boot/dts/kirkwood-dnskw.dtsi')

diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index d544f77a4ca4..aefa375a550d 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -148,44 +148,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "okay";
-			chip-delay = <35>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
-			};
-		};
 	};
 
 	regulators {
@@ -220,6 +182,44 @@
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x500000>;
+	};
+
+	partition@600000 {
+		label = "ramdisk";
+		reg = <0x0600000 0x500000>;
+	};
+
+	partition@b00000 {
+		label = "image";
+		reg = <0x0b00000 0x6600000>;
+	};
+
+	partition@7100000 {
+		label = "mini firmware";
+		reg = <0x7100000 0xa00000>;
+	};
+
+	partition@7b00000 {
+		label = "config";
+		reg = <0x7b00000 0x500000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
-- 
cgit