From 35f5c69b456f21ec2cd494866fabbb310205f35f Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Fri, 16 May 2014 10:49:02 +0200 Subject: ARM: dts: kirkwood: add kirkwood-km_common DTSI files This file allows to factor the common parts between the various Keymile Kirkwood Designs. kirkwood-km_common configures the peripherals that are currently common to all our Kirkwood designs: PCIe, pinctrl, bitbang I2C, NAND Flash controller. The kirkwood-km_kirkwood file is then changed to include this common file. Signed-off-by: Valentin Longchamp Link: https://lkml.kernel.org/r/1400230143-15620-3-git-send-email-valentin.longchamp@keymile.com Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 38 +----------------------------- 1 file changed, 1 insertion(+), 37 deletions(-) (limited to 'arch/arm/boot/dts/kirkwood-km_kirkwood.dts') diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 61139bf30985..235bf382fff9 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -2,6 +2,7 @@ #include "kirkwood.dtsi" #include "kirkwood-98dx4122.dtsi" +#include "kirkwood-km_common.dtsi" / { model = "Keymile Kirkwood Reference Design"; @@ -11,43 +12,6 @@ device_type = "memory"; reg = <0x00000000 0x08000000>; }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; - pinctrl-names = "default"; - - pmx_i2c_gpio_sda: pmx-gpio-sda { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_i2c_gpio_scl: pmx-gpio-scl { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "ok"; - }; - }; - - i2c@0 { - compatible = "i2c-gpio"; - gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ - &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - }; -}; - -&nand { - status = "okay"; - chip-delay = <25>; }; &mdio { -- cgit