From e691f9282a89e24a8e87cdb91a181c6283ee5124 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 20 Oct 2021 14:36:12 +0300 Subject: ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch In the new behavior, the sja1105 driver expects there to be explicit RGMII delays present on the fixed-link ports, otherwise it will complain that it falls back to legacy behavior, which is to apply RGMII delays incorrectly derived from the phy-mode string. In this case, the legacy behavior of the driver is to not apply delays in any direction (mostly because the SJA1105T can't do that, so this board uses PCB traces). To preserve that but also silence the driver, use explicit delays of 0 ns. The delay information from the phy-mode is ignored by new kernels (it's still RGMII as long as it's "rgmii*" something), and the explicit {rx,tx}-internal-delay-ps properties are ignored by old kernels, so the change works both ways. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a-tsn.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot/dts/ls1021a-tsn.dts') diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts index ff0ffb22768b..1ea32fff4120 100644 --- a/arch/arm/boot/dts/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -91,6 +91,8 @@ /* Internal port connected to eth2 */ ethernet = <&enet2>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; reg = <4>; fixed-link { -- cgit