From d641c3d5870db37709f9536054122255f007058c Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 31 May 2013 09:27:05 -0700 Subject: ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeup Using the gpio-keys bindings, configure the user button on Beagle boards. Since the user button is enabled as a wakeup source, also ensure the GPIO pin is mux'd correctly and has IO ring wakeups enabled, so it can also wakeup from off mode. Special thanks to Florian Vaussard for suggesting the preprocessor feature. Cc: Florian Vaussard Signed-off-by: Kevin Hilman Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap3-beagle.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm/boot/dts/omap3-beagle.dts') diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 0b6dbfa62c95..eb7e02a01a0b 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -71,6 +71,26 @@ reset-supply = <&hsusb2_reset>; vcc-supply = <&hsusb2_power>; }; + + gpio_keys { + compatible = "gpio-keys"; + + user { + label = "user"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + linux,code = <0x114>; + gpio-key,wakeup; + }; + + }; +}; + +&omap3_pmx_wkup { + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + 0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ + >; + }; }; &omap3_pmx_core { @@ -154,3 +174,8 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; +}; -- cgit