From c809801d4ceb5185b1c670562a94aef6defe9a70 Mon Sep 17 00:00:00 2001
From: Archit Taneja <architt@codeaurora.org>
Date: Fri, 23 Sep 2016 12:03:07 +0530
Subject: arm: dts: qcom: apq8064-ifc6410: Add HDMI support

Add HDMI support on IFC6410. Populate the regulators required by HDMI-TX
and PHY. Establish the link between the MDP4 DTV encoder and HDMI. Create
a generic micro HDMI connector DT node. The msm drm driver doesn't parse
for HDMI connectors in DT, but it will do so later.

Cc: devicetree@vger.kernel.org

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 74 ++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

(limited to 'arch/arm/boot/dts/qcom-apq8064-ifc6410.dts')

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 2eeb0904eaa7..3d37cab3b9a9 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -43,6 +43,17 @@
 		};
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
 	soc {
 		pinctrl@800000 {
 			card_detect: card_detect {
@@ -64,6 +75,25 @@
 					bias-disable;
 				};
 			};
+
+			hdmi_pinctrl: hdmi-pinctrl {
+				mux {
+					pins = "gpio70", "gpio71", "gpio72";
+					function = "hdmi";
+				};
+
+				pinconf_ddc {
+					pins = "gpio70", "gpio71";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				pinconf_hpd {
+					pins = "gpio72";
+					bias-pull-down;
+					drive-strength = <16>;
+				};
+			};
 		};
 
 		rpm@108000 {
@@ -329,5 +359,49 @@
 				mmc-pwrseq = <&sdcc4_pwrseq>;
 			};
 		};
+
+		hdmi-tx@4a00000 {
+			status = "okay";
+
+			core-vdda-supply = <&pm8921_hdmi_switch>;
+			hdmi-mux-supply = <&ext_3p3v>;
+
+			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pinctrl>;
+
+			ports {
+				port@0 {
+					endpoint {
+						remote-endpoint = <&mdp_dtv_out>;
+					};
+				};
+
+				port@1 {
+					endpoint {
+						remote-endpoint = <&hdmi_con>;
+					};
+				};
+			};
+		};
+
+		hdmi-phy@4a00400 {
+			status = "okay";
+
+			core-vdda-supply = <&pm8921_hdmi_switch>;
+		};
+
+		mdp@5100000 {
+			status = "okay";
+
+			ports {
+				port@3 {
+					endpoint {
+						remote-endpoint = <&hdmi_in>;
+					};
+				};
+			};
+		};
 	};
 };
-- 
cgit