From ec4c6c57af576e10c70547b782db04eb3602f5f4 Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Sun, 4 Nov 2018 16:50:34 -0500 Subject: ARM: dts: qcom: msm8974-hammerhead: add WiFi support This patch adds WiFi support to the LG Nexus 5 (hammerhead) phone. Signed-off-by: Jonathan Marek [masneyb@onstation.org: Enabled wlan_regulator_pin and wlan_sleep_clk_pin] Signed-off-by: Brian Masney Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) (limited to 'arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts') diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 51444c53fc72..5cf9c7e20f2e 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -220,6 +220,20 @@ }; }; }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; }; &soc { @@ -242,6 +256,20 @@ }; }; + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + i2c3_pins: i2c3 { mux { pins = "gpio10", "gpio11"; @@ -283,6 +311,32 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhci@f98a4900 { + status = "ok"; + + max-frequency = <100000000>; + bus-width = <4>; + non-removable; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; + }; + gpio-keys { compatible = "gpio-keys"; input-name = "gpio-keys"; @@ -371,6 +425,22 @@ bias-pull-up; power-source = ; }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = ; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio17"; + function = "normal"; + + bias-disable; + power-source = ; + }; }; }; }; -- cgit From fb143fcbb9ad361004f2818e9dcb52b2556bfec1 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Wed, 31 Oct 2018 20:11:49 -0400 Subject: ARM: dts: qcom: msm8974-hammerhead: add USB OTG support Add the device tree bindings for USB OTG support. Driver was tested using on a LG Nexus 5 (hammerhead) phone. This patch is based on work from Jonathan Marek and from the other msm8974 devices. Signed-off-by: Brian Masney Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) (limited to 'arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts') diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 5cf9c7e20f2e..b3b04736a159 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -270,6 +270,16 @@ }; }; + i2c1_pins: i2c1 { + mux { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c3_pins: i2c3 { mux { pins = "gpio10", "gpio11"; @@ -396,6 +406,24 @@ }; }; + i2c@f9923000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; + }; + }; + i2c@f9925000 { status = "ok"; pinctrl-names = "default"; @@ -413,6 +441,31 @@ amstaos,proximity-diodes = <0>; }; }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; }; &spmi_bus { @@ -441,6 +494,13 @@ bias-disable; power-source = ; }; + + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; + }; }; }; }; -- cgit