From 724ba6751532055db75992fc6ae21c3e322e94a7 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 4 May 2023 18:38:52 -0500 Subject: ARM: dts: Move .dts files to vendor sub-directories The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar Acked-by: Michal Simek #Xilinx Acked-by: Krzysztof Kozlowski Acked-by: Neil Armstrong Acked-by: Paul Barker Acked-by: Tony Lindgren Acked-by: Gregory CLEMENT Acked-by: Heiko Stuebner Acked-by: Wei Xu #hisilicon Acked-by: Geert Uytterhoeven Acked-by: Nick Hawkins Acked-by: Baruch Siach Reviewed-by: Linus Walleij Reviewed-by: Andre Przywara Acked-by: Andre Przywara Reviewed-by: Claudiu Beznea Acked-by: Peter Rosin Acked-by: Jesper Nilsson Acked-by: Sudeep Holla Acked-by: Florian Fainelli #broadcom Acked-by: Manivannan Sadhasivam Reviewed-by: Jisheng Zhang Acked-by: Patrice Chotard Acked-by: Romain Perier Acked-by: Alexandre TORGUE Acked-by: Shawn Guo Acked-by: Kunihiko Hayashi Acked-by: Enric Balletbo i Serra Signed-off-by: Rob Herring --- arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 2405 ++++++++++++++++++++++++++++++ 1 file changed, 2405 insertions(+) create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974.dtsi (limited to 'arch/arm/boot/dts/qcom/qcom-msm8974.dtsi') diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi new file mode 100644 index 000000000000..21fae1f8966f --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi @@ -0,0 +1,2405 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + + CPU0: cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; + }; + + CPU1: cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; + }; + + CPU2: cpu@2 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; + }; + + CPU3: cpu@3 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + qcom,saw = <&saw_l2>; + }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8974", "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + pmu { + compatible = "qcom,krait-pmu"; + interrupts = ; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_region: mpss@8000000 { + reg = <0x08000000 0x5100000>; + no-map; + }; + + mba_region: mba@d100000 { + reg = <0x0d100000 0x100000>; + no-map; + }; + + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0xa00000>; + no-map; + }; + + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; + }; + + venus_region: memory@f500000 { + reg = <0x0f500000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; + }; + + tz_region: memory@fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; + }; + + rfsa_mem: memory@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; + + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupt-parent = <&intc>; + interrupts = ; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = ; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupt-parent = <&intc>; + interrupts = ; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-2 = <&apcs 8 9>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + adsp_smsm: adsp@2 { + reg = <2>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + }; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + clock-frequency = <19200000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = , + ; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = ; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = ; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = ; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = ; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = ; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = ; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + saw0: power-controller@f9089000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + + saw1: power-controller@f9099000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + + saw2: power-controller@f90a9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw3: power-controller@f90b9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw_l2: power-controller@f9012000 { + compatible = "qcom,saw2"; + reg = <0xf9012000 0x1000>; + regulator; + }; + + acc0: power-manager@f9088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; + }; + + acc1: power-manager@f9098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; + }; + + acc2: power-manager@f90a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; + }; + + acc3: power-manager@f90b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; + }; + + sdhc_1: mmc@f9824900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc", "core"; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + bus-width = <8>; + non-removable; + + status = "disabled"; + }; + + sdhc_3: mmc@f9864900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc", "core"; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_AHB_CLK>, + <&gcc GCC_SDCC3_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + bus-width = <4>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + sdhc_2: mmc@f98a4900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc", "core"; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + bus-width = <4>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; + status = "disabled"; + }; + + blsp1_i2c1: i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@f9924000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart1: serial@f995d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995d000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_default>; + pinctrl-1 = <&blsp2_uart1_sleep>; + status = "disabled"; + }; + + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_uart4: serial@f9960000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf9960000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart4_default>; + status = "disabled"; + }; + + blsp2_i2c2: i2c@f9964000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9964000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c5: i2c@f9967000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c6: i2c@f9968000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb: usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x200>, + <0xf9a55200 0x200>; + interrupts = ; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <75000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs1_phy: phy-0 { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + usb_hs2_phy: phy-1 { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>; + reset-names = "phy", "por"; + status = "disabled"; + }; + }; + }; + + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + pronto: remoteproc@fb204000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_region>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3680"; + + clocks = <&rpmcc RPM_SMD_CXO_A2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = ; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + status = "disabled"; + + qcom,mmio = <&pronto>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = , + ; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + + sram@fc190000 { + compatible = "qcom,msm8974-rpm-stats"; + reg = <0xfc190000 0x10000>; + }; + + etf@fc307000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc307000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merger_out>; + }; + }; + }; + }; + + tpiu@fc318000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xfc318000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; + }; + }; + }; + + funnel@fc31a000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc31a000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - not-connected + * 1 - connected trought funnel to Multimedia CPU + * 2 - connected to Wireless CPU + * 3 - not-connected + * 4 - not-connected + * 6 - not-connected + * 7 - connected to STM + */ + port@5 { + reg = <5>; + funnel1_in5: endpoint { + remote-endpoint = <&kpss_out>; + }; + }; + }; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merger_in1>; + }; + }; + }; + }; + + funnel@fc31b000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc31b000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - connected trought funnel to Audio, Modem and + * Resource and Power Manager CPU's + * 2...7 - not-connected + */ + port@1 { + reg = <1>; + merger_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + }; + + out-ports { + port { + merger_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + }; + + replicator@fc31c000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0xfc31c000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etr@fc322000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc322000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; + }; + }; + }; + + etm@fc33c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33c000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&kpss_in0>; + }; + }; + }; + }; + + etm@fc33d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33d000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&kpss_in1>; + }; + }; + }; + }; + + etm@fc33e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33e000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&kpss_in2>; + }; + }; + }; + }; + + etm@fc33f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33f000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&kpss_in3>; + }; + }; + }; + }; + + /* KPSS funnel, only 4 inputs are used */ + funnel@fc345000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc345000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + kpss_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + kpss_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + kpss_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + kpss_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + kpss_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; + }; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x4000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>; + clock-names = "xo", + "sleep_clk"; + }; + + rpm_msg_ram: sram@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + + bimc: interconnect@fc380000 { + reg = <0xfc380000 0x6a000>; + compatible = "qcom,msm8974-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + snoc: interconnect@fc460000 { + reg = <0xfc460000 0x4000>; + compatible = "qcom,msm8974-snoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + pnoc: interconnect@fc468000 { + reg = <0xfc468000 0x4000>; + compatible = "qcom,msm8974-pnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + ocmemnoc: interconnect@fc470000 { + reg = <0xfc470000 0x4000>; + compatible = "qcom,msm8974-ocmemnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; + }; + + mmssnoc: interconnect@fc478000 { + reg = <0xfc478000 0x4000>; + compatible = "qcom,msm8974-mmssnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&mmcc MMSS_S0_AXI_CLK>, + <&mmcc MMSS_S0_AXI_CLK>; + }; + + cnoc: interconnect@fc480000 { + reg = <0xfc480000 0x4000>; + compatible = "qcom,msm8974-cnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + tsens: thermal-sensor@fc4a9000 { + compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1"; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_use_backup>, + <&tsens_mode_backup>, + <&tsens_base1_backup>, <&tsens_base2_backup>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>, + <&tsens_s10_p1>, <&tsens_s10_p2>, + <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>, + <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>, + <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>, + <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>, + <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>, + <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>, + <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>, + <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>, + <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>, + <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>, + <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>; + nvmem-cell-names = "mode", + "base1", "base2", + "use_backup", + "mode_backup", + "base1_backup", "base2_backup", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2", + "s10_p1", "s10_p2", + "s0_p1_backup", "s0_p2_backup", + "s1_p1_backup", "s1_p2_backup", + "s2_p1_backup", "s2_p2_backup", + "s3_p1_backup", "s3_p2_backup", + "s4_p1_backup", "s4_p2_backup", + "s5_p1_backup", "s5_p2_backup", + "s6_p1_backup", "s6_p2_backup", + "s7_p1_backup", "s7_p2_backup", + "s8_p1_backup", "s8_p2_backup", + "s9_p1_backup", "s9_p2_backup", + "s10_p1_backup", "s10_p2_backup"; + #qcom,sensors = <11>; + interrupts = ; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + qfprom: qfprom@fc4bc000 { + compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@d0 { + reg = <0xd0 0x1>; + bits = <0 8>; + }; + + tsens_s0_p1: s0-p1@d1 { + reg = <0xd1 0x1>; + bits = <0 6>; + }; + + tsens_s1_p1: s1-p1@d2 { + reg = <0xd1 0x2>; + bits = <6 6>; + }; + + tsens_s2_p1: s2-p1@d2 { + reg = <0xd2 0x2>; + bits = <4 6>; + }; + + tsens_s3_p1: s3-p1@d3 { + reg = <0xd3 0x1>; + bits = <2 6>; + }; + + tsens_s4_p1: s4-p1@d4 { + reg = <0xd4 0x1>; + bits = <0 6>; + }; + + tsens_s5_p1: s5-p1@d4 { + reg = <0xd4 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@d5 { + reg = <0xd5 0x2>; + bits = <4 6>; + }; + + tsens_s7_p1: s7-p1@d6 { + reg = <0xd6 0x1>; + bits = <2 6>; + }; + + tsens_s8_p1: s8-p1@d7 { + reg = <0xd7 0x1>; + bits = <0 6>; + }; + + tsens_mode: mode@d7 { + reg = <0xd7 0x1>; + bits = <6 2>; + }; + + tsens_s9_p1: s9-p1@d8 { + reg = <0xd8 0x1>; + bits = <0 6>; + }; + + tsens_s10_p1: s10_p1@d8 { + reg = <0xd8 0x2>; + bits = <6 6>; + }; + + tsens_base2: base2@d9 { + reg = <0xd9 0x2>; + bits = <4 8>; + }; + + tsens_s0_p2: s0-p2@da { + reg = <0xda 0x2>; + bits = <4 6>; + }; + + tsens_s1_p2: s1-p2@db { + reg = <0xdb 0x1>; + bits = <2 6>; + }; + + tsens_s2_p2: s2-p2@dc { + reg = <0xdc 0x1>; + bits = <0 6>; + }; + + tsens_s3_p2: s3-p2@dc { + reg = <0xdc 0x2>; + bits = <6 6>; + }; + + tsens_s4_p2: s4-p2@dd { + reg = <0xdd 0x2>; + bits = <4 6>; + }; + + tsens_s5_p2: s5-p2@de { + reg = <0xde 0x2>; + bits = <2 6>; + }; + + tsens_s6_p2: s6-p2@df { + reg = <0xdf 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@e0 { + reg = <0xe0 0x1>; + bits = <0 6>; + }; + + tsens_s8_p2: s8-p2@e0 { + reg = <0xe0 0x2>; + bits = <6 6>; + }; + + tsens_s9_p2: s9-p2@e1 { + reg = <0xe1 0x2>; + bits = <4 6>; + }; + + tsens_s10_p2: s10_p2@e2 { + reg = <0xe2 0x2>; + bits = <2 6>; + }; + + tsens_s5_p2_backup: s5-p2_backup@e3 { + reg = <0xe3 0x2>; + bits = <0 6>; + }; + + tsens_mode_backup: mode_backup@e3 { + reg = <0xe3 0x1>; + bits = <6 2>; + }; + + tsens_s6_p2_backup: s6-p2_backup@e4 { + reg = <0xe4 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2_backup: s7-p2_backup@e4 { + reg = <0xe4 0x2>; + bits = <6 6>; + }; + + tsens_s8_p2_backup: s8-p2_backup@e5 { + reg = <0xe5 0x2>; + bits = <4 6>; + }; + + tsens_s9_p2_backup: s9-p2_backup@e6 { + reg = <0xe6 0x2>; + bits = <2 6>; + }; + + tsens_s10_p2_backup: s10_p2_backup@e7 { + reg = <0xe7 0x1>; + bits = <0 6>; + }; + + tsens_base1_backup: base1_backup@440 { + reg = <0x440 0x1>; + bits = <0 8>; + }; + + tsens_s0_p1_backup: s0-p1_backup@441 { + reg = <0x441 0x1>; + bits = <0 6>; + }; + + tsens_s1_p1_backup: s1-p1_backup@442 { + reg = <0x441 0x2>; + bits = <6 6>; + }; + + tsens_s2_p1_backup: s2-p1_backup@442 { + reg = <0x442 0x2>; + bits = <4 6>; + }; + + tsens_s3_p1_backup: s3-p1_backup@443 { + reg = <0x443 0x1>; + bits = <2 6>; + }; + + tsens_s4_p1_backup: s4-p1_backup@444 { + reg = <0x444 0x1>; + bits = <0 6>; + }; + + tsens_s5_p1_backup: s5-p1_backup@444 { + reg = <0x444 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1_backup: s6-p1_backup@445 { + reg = <0x445 0x2>; + bits = <4 6>; + }; + + tsens_s7_p1_backup: s7-p1_backup@446 { + reg = <0x446 0x1>; + bits = <2 6>; + }; + + tsens_use_backup: use_backup@447 { + reg = <0x447 0x1>; + bits = <5 3>; + }; + + tsens_s8_p1_backup: s8-p1_backup@448 { + reg = <0x448 0x1>; + bits = <0 6>; + }; + + tsens_s9_p1_backup: s9-p1_backup@448 { + reg = <0x448 0x2>; + bits = <6 6>; + }; + + tsens_s10_p1_backup: s10_p1_backup@449 { + reg = <0x449 0x2>; + bits = <4 6>; + }; + + tsens_base2_backup: base2_backup@44a { + reg = <0x44a 0x2>; + bits = <2 8>; + }; + + tsens_s0_p2_backup: s0-p2_backup@44b { + reg = <0x44b 0x3>; + bits = <2 6>; + }; + + tsens_s1_p2_backup: s1-p2_backup@44c { + reg = <0x44c 0x1>; + bits = <0 6>; + }; + + tsens_s2_p2_backup: s2-p2_backup@44c { + reg = <0x44c 0x2>; + bits = <6 6>; + }; + + tsens_s3_p2_backup: s3-p2_backup@44d { + reg = <0x44d 0x2>; + bits = <4 6>; + }; + + tsens_s4_p2_backup: s4-p2_backup@44e { + reg = <0x44e 0x1>; + bits = <2 6>; + }; + }; + + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + bam_dmux_dma: dma-controller@fc834000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xfc834000 0x7000>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + }; + + remoteproc_mss: remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&modem_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + }; + + smd-edge { + interrupts = ; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon"; + reg = <0xfd484000 0x2000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@fd4a0000 { + compatible = "qcom,tcsr-msm8974", "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; + + sdc1_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd-pins { + pins = "gpio54"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + rx-pins { + pins = "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-up; + }; + + tx-pins { + pins = "gpio4"; + function = "blsp_uart2"; + drive-strength = <4>; + bias-disable; + }; + }; + + blsp2_uart1_default: blsp2-uart1-default-state { + tx-rts-pins { + pins = "gpio41", "gpio44"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts-pins { + pins = "gpio42", "gpio43"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp2_uart1_sleep: blsp2-uart1-sleep-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart4_default: blsp2-uart4-default-state { + tx-rts-pins { + pins = "gpio53", "gpio56"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts-pins { + pins = "gpio54", "gpio55"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP1_I2C4 info is missing */ + + /* BLSP1_I2C5 info is missing */ + + blsp1_i2c6_default: blsp1-i2c6-default-state { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + + /* BLSP2_I2C1 info is missing */ + + blsp2_i2c2_default: blsp2-i2c2-default-state { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C3 info is missing */ + + /* BLSP2_I2C4 info is missing */ + + blsp2_i2c5_default: blsp2-i2c5-default-state { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep-state { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c6_default: blsp2-i2c6-default-state { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-pull-up; + }; + + cci_default: cci-default-state { + cci_i2c0_default: cci-i2c0-default-pins { + pins = "gpio19", "gpio20"; + function = "cci_i2c0"; + drive-strength = <2>; + bias-disable; + }; + + cci_i2c1_default: cci-i2c1-default-pins { + pins = "gpio21", "gpio22"; + function = "cci_i2c1"; + drive-strength = <2>; + bias-disable; + }; + }; + + cci_sleep: cci-sleep-state { + cci_i2c0_sleep: cci-i2c0-sleep-pins { + pins = "gpio19", "gpio20"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cci_i2c1_sleep: cci-i2c1-sleep-pins { + pins = "gpio21", "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + spi8_default: spi8_default-state { + mosi-pins { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso-pins { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs-pins { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk-pins { + pins = "gpio48"; + function = "blsp_spi8"; + }; + }; + }; + + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfd8c0000 0x6000>; + clocks = <&xo_board>, + <&gcc GCC_MMSS_GPLL0_CLK_SRC>, + <&gcc GPLL0_VOTE>, + <&gcc GPLL1_VOTE>, + <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "mmss_gpll0_vote", + "gpll0_vote", + "gpll1_vote", + "gfx3d_clk_src", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll", + "edp_link_clk", + "edp_vco_div"; + }; + + mdss: display-subsystem@fd900000 { + compatible = "qcom,mdss"; + reg = <0xfd900000 0x100>, <0xfd924000 0x1000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "vsync"; + + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: display-controller@fd900000 { + compatible = "qcom,msm8974-mdp5", "qcom,mdp5"; + reg = <0xfd900100 0x22000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>; + interconnect-names = "mdp0-mem"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@fd922800 { + compatible = "qcom,msm8974-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0xfd922800 0x1f8>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&mdss_dsi0_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@fd922a00 { + compatible = "qcom,dsi-phy-28nm-hpm"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x280>, + <0xfd922d80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@fd922e00 { + compatible = "qcom,msm8974-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0xfd922e00 0x1f8>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&mdss_dsi1_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@fd923000 { + compatible = "qcom,dsi-phy-28nm-hpm"; + reg = <0xfd923000 0xd4>, + <0xfd923100 0x280>, + <0xfd923380 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + cci: cci@fda0c000 { + compatible = "qcom,msm8974-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfda0c000 0x1000>; + interrupts = ; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci_default>; + pinctrl-1 = <&cci_sleep>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.1", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = ; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", "ocmem"; + + // iommus = <&gpu_iommu 0>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + + sram@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + ranges = <0 0xfec00000 0x180000>; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + + remoteproc_adsp: remoteproc@fe200000 { + compatible = "qcom,msm8974-adsp-pil"; + reg = <0xfe200000 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = ; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + label = "lpass"; + }; + }; + + imem: sram@fe805000 { + compatible = "qcom,msm8974-imem", "syscon", "simple-mfd"; + reg = <0xfe805000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <19200000>; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; -- cgit