From 4f0b2563c4c0c67fc5b5e2369d5f62f91abc42e7 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Fri, 6 Oct 2017 18:59:52 +0100 Subject: ARM: dts: iwg20d-q7: Rework DT architecture MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since the same carrier board may host RZ/G1M and RZ/G1N based Systems on Module, the DT architecture for iwg20d-q7 needs better decoupling. This patch provides: * iwg20d-q7-common.dtsi - its purpose is to define the carrier board definitions, and its content is basically the same as the previous version of r8a7743-iwg20d-q7.dts, only it has no reference to the SoM .dtsi, and that's why the filename doesn't mention the SoC name any more. * r8a7743-iwg20d-q7.dts - its new purpose is to put together the SoM .dtsi (r8a7743-iwg20m.dtsi) and the carrier board .dtsi defined by this very patch, along with "model" and "compatible" properties. The final DT architecture to describe the board is now: r8a7743-iwg20d-q7.dts # Carrier Board + SoM ├── r8a7743-iwg20m.dtsi # SoM │   └── r8a7743.dtsi # SoC └── iwg20d-q7-common.dtsi # Carrier Board and maximizes the reuse of the definitions for the carrier board and for the SoM. Signed-off-by: Fabrizio Castro Signed-off-by: Chris Paterson Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 139 +------------------------------- 1 file changed, 2 insertions(+), 137 deletions(-) (limited to 'arch/arm/boot/dts/r8a7743-iwg20d-q7.dts') diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts index 0136864bc595..6aa6b7467704 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the iWave-RZG1M Qseven carrier board + * Device Tree Source for the iWave-RZ/G1M Qseven board * * Copyright (C) 2017 Renesas Electronics Corp. * @@ -10,144 +10,9 @@ /dts-v1/; #include "r8a7743-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" / { model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; - - aliases { - serial0 = &scif0; - ethernet0 = &avb; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = "serial0:115200n8"; - }; - - vcc_sdhi1: regulator-vcc-sdhi1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI1 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; -}; - -&pfc { - i2c2_pins: i2c2 { - groups = "i2c2"; - function = "i2c2"; - }; - - scif0_pins: scif0 { - groups = "scif0_data_d"; - function = "scif0"; - }; - - avb_pins: avb { - groups = "avb_mdio", "avb_gmii"; - function = "avb"; - }; - - sdhi1_pins: sd1 { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <3300>; - }; - - sdhi1_pins_uhs: sd1_uhs { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <1800>; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - usb1_pins: usb1 { - groups = "usb1"; - function = "usb1"; - }; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy3>; - phy-mode = "gmii"; - renesas,no-ether-link; - status = "okay"; - - phy3: ethernet-phy@3 { - reg = <3>; - micrel,led-mode = <1>; - }; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi1>; - vqmmc-supply = <&vccq_sdhi1>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - sd-uhs-sdr50; - status = "okay"; -}; - -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - rtc@68 { - compatible = "ti,bq32000"; - reg = <0x68>; - }; -}; - -&pci0 { - status = "okay"; - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; -}; - -&pci1 { - status = "okay"; - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; -}; - -&usbphy { - status = "okay"; }; -- cgit