From e9e79d5395b2e60a03811073e0aedfbd7fa0bc57 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Sat, 22 Oct 2016 20:54:55 +0800 Subject: ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-fennec.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot/dts/rk3288-fennec.dts') diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index 805c0d26770b..61d1c1028317 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -93,7 +93,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "okay"; @@ -111,7 +111,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = ; #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; @@ -345,7 +345,7 @@ &usbphy { pinctrl-names = "default"; pinctrl-0 = <&host_drv>; - vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; status = "okay"; }; -- cgit