From db7be2cb87ae65e2d033a9f61f7fb94bce505177 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Wed, 6 Oct 2021 11:53:55 +0200 Subject: ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151 Referring to the note under USBH reset and clocks chapter of RM0436, "In order to access USBH_OHCI registers it is necessary to activate the USB clocks by enabling the PLL controlled by USBPHYC" (ck_usbo_48m). The point is, when USBPHYC PLL is not enabled, OHCI register access freezes the resume from STANDBY. It is the case when dual USBH is enabled, instead of OTG + single USBH. When OTG is probed, as ck_usbo_48m is USBO clock parent, then USBPHYC PLL is enabled and OHCI register access is OK. This patch adds ck_usbo_48m (provided by USBPHYC PLL) as clock of USBH OHCI, thus USBPHYC PLL will be enabled and OHCI register access will be OK. Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/stm32mp151.dtsi') diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 6992a4b0ba79..f693a7d24247 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1452,7 +1452,7 @@ usbh_ohci: usb@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; - clocks = <&rcc USBH>; + clocks = <&rcc USBH>, <&usbphyc>; resets = <&rcc USBH_R>; interrupts = ; status = "disabled"; -- cgit