From 4b877d4a35bf9c284b6992fdd9232718e9e921ee Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Tue, 6 Feb 2018 12:48:58 +0800 Subject: ARM: dts: sunxi: h3/h5: Add r_i2c pinmux node H3/H5 SoCs contain an I2C controller optionally available on the PL0 and PL1 pins. This patch adds pinmux configuration for this controller. Signed-off-by: Ondrej Jirman [Icenowy: change commit message, node name and function name] Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 1be1a02d6df2..92b8fa96e737 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -837,6 +837,11 @@ pins = "PL11"; function = "s_cir_rx"; }; + + r_i2c_pins: r-i2c { + pins = "PL0", "PL1"; + function = "s_i2c"; + }; }; }; }; -- cgit From 7824fcb38c1c9c9157ded239cdb78afe20115224 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Tue, 6 Feb 2018 12:48:59 +0800 Subject: ARM: dts: sunxi: h3/h5: Add r_i2c I2C controller Allwinner H3/H5 SoCs have an I2C controller at PL GPIO bank. Add support for it in the device tree. Signed-off-by: Ondrej Jirman [Icenowy: Change to use r_ccu and change pinmux node name] Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 92b8fa96e737..c3bff1105e5d 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -822,6 +822,19 @@ status = "disabled"; }; + r_i2c: i2c@1f02400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01f02400 0x400>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; + clocks = <&r_ccu CLK_APB0_I2C>; + resets = <&r_ccu RST_APB0_I2C>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; -- cgit From dceecd9134178e010345bb3b6653d237a88546dd Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 6 Feb 2018 12:49:00 +0800 Subject: ARM: dts: sun8i: h3: add operating-points-v2 table for CPU The CPU on Allwinner H3 can do dynamic frequency scaling. Add a DVFS table based on the one shipped with Allwinner's H3 SDK. The voltage-frequency relationship seems to be conservative, and Armbian has another DVFS table which uses lower voltage at a certain frequency. However, the official one is chosen for safety. Frequencies higher than 1008MHz are temporarily dropped in the table, as they may lead to over voltage on boards without proper regulator settings or over temperature on boards with proper regulator settings. They will be added back once regulator settings are ready and thermal sensor driver is merged. In order to satisfy all different regulators (SY8106A which is 50mV per level, SY8113B which have two states: 1.1V and 1.3V, and some board with non-tweakable regulators), all the OPPs are defined with a range which has the target value as the minimum allowed value, and 1.3V (the highest VDD-CPUX voltage suggested by the datasheet) as the maximum allowed value. It's proven to work well with a board with SY8113B. Signed-off-by: Icenowy Zheng Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-h3.dtsi | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 10da8ed7db81..41d57c76f290 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -43,32 +43,62 @@ #include "sunxi-h3-h5.dtsi" / { + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000 1040000 1300000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1100000 1100000 1300000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000 1200000 1300000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + operating-points-v2 = <&cpu0_opp_table>; }; }; -- cgit From 3c5f893e96af6d4fe6cc64c24ed7de7d4e3a2fa6 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 6 Feb 2018 12:49:01 +0800 Subject: ARM: dts: sun8i: h2+: add SY8113B regulator used by Orange Pi Zero board Orange Pi Zero board has a SY8113B regulator, which is controlled via GPIO and capable of outputing 1.1V when the PL6 GPIO is set to output 0 or 1.3V when the PL6 GPIO is set to input or output 1, and the output is the power supply of the ARM cores in H2+ SoC. Add the device tree node of this regulator and set the cpu's cpu-supply property to it. Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai [wens@csie.org: rename regulator node name and label] Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 0bc031fe4c56..84cd9c061227 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -89,6 +89,23 @@ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; }; + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + enable-active-high; + gpios-states = <1>; + states = <1100000 0 + 1300000 1>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; @@ -96,6 +113,10 @@ }; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci0 { status = "okay"; }; -- cgit From 1c72060511a46eee7166e4e3f6de689850bf5bcc Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 6 Feb 2018 12:49:02 +0800 Subject: ARM: dts: sun8i: h3: add SY8113B regulator used by Orange Pi One board Orange Pi One board has a SY8113B regulator, which is controlled via GPIO and capable of outputing 1.1V when the PL6 GPIO is set to output 0 or 1.3V when the PL6 GPIO is set to input or output 1, and the output is the power supply of the ARM cores in H3 SoC. Add the device tree node of this regulator and set the cpu's cpu-supply property to it. Signed-off-by: Icenowy Zheng [wens@csie.org: rename regulator node name and label] Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 3328fe583c9b..d56ac3951078 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -99,6 +99,27 @@ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; }; }; + + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + enable-active-high; + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; }; &de { -- cgit From e6e7b7c2c81e05c8774193da06348119583d4292 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 6 Feb 2018 12:49:04 +0800 Subject: ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VDD-CPUX voltage The VDD-CPUX voltage of ALL-H3-CC H3 ver should be 1.2V, not the 3.3V currently defined in the device tree. Fix the voltage in the device tree. Fixes: 6ca358645d4d ("ARM: dts: sun8i: h3: Add dts file for Libre Computer Board ALL-H3-CC H3 ver.") Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai Cc: # 4.16.x Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts index b20a710da7bc..1aa219c8fb44 100644 --- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -113,8 +113,8 @@ reg_vdd_cpux: vdd-cpux { compatible = "regulator-fixed"; regulator-name = "vdd-cpux"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; vin-supply = <®_vcc5v0>; -- cgit From ed582faff276afd43255544d2d133144113a3940 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 6 Feb 2018 12:49:05 +0800 Subject: ARM: dts: sun8i: h3: set the cpu-supply to VDD-CPUX on ALL-H3-CC H3 ver The ALL-H3-CC has a fixed VDD-CPUX voltage at 1.2V, which is supplied by a regulator. Set the CPU's cpu-supply property to the VDD-CPUX regulator. Signed-off-by: Icenowy Zheng [wens@csie.org: Fix device node ordering] Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts index 1aa219c8fb44..5971b8b0b768 100644 --- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -131,6 +131,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &de { status = "okay"; }; -- cgit From bceb1f25b8614e529cc74c5f2339e84f4d4a88ae Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 24 Apr 2018 19:34:18 +0800 Subject: ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VCC-1V2 regulator voltage The voltage of the VCC-1V2 regulator on the ALL-H3-CC H3 ver. should be 1.2V, not the 3.3V currently defined in the device tree. Fix the voltage in the device tree. Fixes: 6ca358645d4d ("ARM: dts: sun8i: h3: Add dts file for Libre Computer Board ALL-H3-CC H3 ver.") Cc: # 4.16.x Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts index 5971b8b0b768..db6b35bb65ff 100644 --- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -62,8 +62,8 @@ reg_vcc1v2: vcc1v2 { compatible = "regulator-fixed"; regulator-name = "vcc1v2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; vin-supply = <®_vcc5v0>; -- cgit From b8f4f1180726d53778771ebf8421bea13a63fc9b Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 24 Apr 2018 13:47:13 +0200 Subject: arm: dts: sun8i: h3: libretech-all-h3-cc: Move board definition to common dtsi Since the libretech-all-h3-cc can use either the H2+, H3 or H5, move the content of the dts file to a common dtsi file to be included by the H3 variant and in a following patch the H5 variant. By the way, update the SPDX licence tag position. Suggested-by: Corentin Labbe Signed-off-by: Neil Armstrong Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 210 +------------------- arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi | 215 +++++++++++++++++++++ 2 files changed, 216 insertions(+), 209 deletions(-) create mode 100644 arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts index db6b35bb65ff..a8b2f0f1c11d 100644 --- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -6,217 +6,9 @@ /dts-v1/; #include "sun8i-h3.dtsi" - -#include -#include +#include "sunxi-libretech-all-h3-cc.dtsi" / { model = "Libre Computer Board ALL-H3-CC H3"; compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3"; - - aliases { - ethernet0 = &emac; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - pwr_led { - label = "librecomputer:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - - status_led { - label = "librecomputer:blue:status"; - gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - power { - label = "power"; - linux,code = ; - gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ - }; - }; - - reg_vcc1v2: vcc1v2 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - enable-active-high; - }; - - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <®_vcc5v0>; - }; - - /* This represents the board's 5V input */ - reg_vcc5v0: vcc5v0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_vcc_dram: vcc-dram { - compatible = "regulator-fixed"; - regulator-name = "vcc-dram"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ - enable-active-high; - }; - - reg_vcc_io: vcc-io { - compatible = "regulator-fixed"; - regulator-name = "vcc-io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc3v3>; - gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ - }; - - reg_vdd_cpux: vdd-cpux { - compatible = "regulator-fixed"; - regulator-name = "vdd-cpux"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - enable-active-high; - }; -}; - -&codec { - allwinner,audio-routing = - "Line Out", "LINEOUT", - "MIC1", "Mic", - "Mic", "MBIAS"; - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_vdd_cpux>; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { - status = "okay"; -}; - -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_vcc_io>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - /* VBUS on USB ports are always on */ - usb0_vbus-supply = <®_vcc5v0>; - usb1_vbus-supply = <®_vcc5v0>; - usb2_vbus-supply = <®_vcc5v0>; - usb3_vbus-supply = <®_vcc5v0>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi new file mode 100644 index 000000000000..f7ffdd6658a2 --- /dev/null +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Chen-Yu Tsai + */ + +#include +#include + +/ { + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "librecomputer:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status_led { + label = "librecomputer:blue:status"; + gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = ; + gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; + }; + + reg_vcc1v2: vcc1v2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v0>; + }; + + /* This represents the board's 5V input */ + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + enable-active-high; + }; + + reg_vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc-io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc3v3>; + gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ + }; + + reg_vdd_cpux: vdd-cpux { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc_io>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + /* VBUS on USB ports are always on */ + usb0_vbus-supply = <®_vcc5v0>; + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + usb3_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; -- cgit From 61bec3bb09260382258201a727e4eea151513961 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 24 Apr 2018 19:34:20 +0800 Subject: ARM: dts: sun8i: h2-plus: Sort dtb entries in Makefile The dtb entry for the Banana Pi M2 Zero in the device tree makefile somehow ended up in between two Orange Pi boards. Move it so the list is properly sorted. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7e2424957809..5c979ed6c77b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -992,8 +992,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a83t-bananapi-m3.dtb \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-a83t-tbs-a711.dtb \ - sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-bananapi-m2-zero.dtb \ + sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-beelink-x2.dtb \ -- cgit From 4068fc82b54e91d81c9cebf374a9121da1fcd1e5 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 24 Apr 2018 19:34:21 +0800 Subject: ARM: dts: sun8i: h2+: Add Libre Computer Board ALL-H3-CC H2+ ver. This patch adds a device tree file for the H2+ version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit 6ca358645d4d ("ARM: dts: sun8i: h3: Add dts file for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H2+ SoC, and has only two 2Gb DDR3 chips instead of four. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts | 13 +++++++++++++ 2 files changed, 14 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5c979ed6c77b..1064d3acb607 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -993,6 +993,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-a83t-tbs-a711.dtb \ sun8i-h2-plus-bananapi-m2-zero.dtb \ + sun8i-h2-plus-libretech-all-h3-cc.dtb \ sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ diff --git a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts new file mode 100644 index 000000000000..4db0d4bb65eb --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Chen-Yu Tsai + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-libretech-all-h3-cc.dtsi" + +/ { + model = "Libre Computer Board ALL-H3-CC H2+"; + compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus"; +}; -- cgit From 06139c822c5011ff79341000f44eca96151aac92 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Mon, 7 May 2018 20:29:42 +0800 Subject: ARM: dts: sun8i: h3: Add SY8106A regulator to Orange Pi PC Add SY8106A regulator to r_i2c bus and enable the r_i2c bus on Orange Pi PC, then set the power supply of the ARM cores to this regulator, in order to enable DVFS. Signed-off-by: Ondrej Jirman [Icenowy: Enable DVFS in this patch, slight changes and change commit message] Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index cea4d647ecbf..46240334128f 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -113,6 +113,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci0 { status = "okay"; }; @@ -182,6 +186,30 @@ }; }; +&r_i2c { + status = "okay"; + + reg_vdd_cpux: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "vdd-cpux"; + silergy,fixed-microvolt = <1200000>; + /* + * The datasheet uses 1.1V as the minimum value of VDD-CPUX, + * however both the Armbian DVFS table and the official one + * have operating points with voltage under 1.1V, and both + * DVFS table are known to work properly at the lowest + * operating point. + * + * Use 1.0V as the minimum voltage instead. + */ + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + &r_pio { leds_r_opc: led_pins { pins = "PL10"; -- cgit