From c7861adbe37f576931650ad8ef805e0c47564b9a Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 12 Apr 2019 02:23:14 +0300 Subject: ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus. But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC are pointing towards the same internal PCS. Therefore nobody is controlling the internal PCS of eTSEC0. Upon initial ndo_open, the SGMII link is ok by virtue of U-boot initialization. But upon an ifdown/ifup sequence, the code path from ndo_open -> init_phy -> gfar_configure_serdes does not get executed for the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII link remains down for eTSEC0. On the LS1021A-TWR board, to signal this failure condition, the PHY driver keeps printing '803x_aneg_done: SGMII link is not ok'. Also, it changes compatible of mdio0 to "fsl,etsec2-mdio" to match mdio1 device. Fixes: 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR") Signed-off-by: Vladimir Oltean Reviewed-by: Claudiu Manoil Acked-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a-twr.dts | 9 ++++++++- arch/arm/boot/dts/ls1021a.dtsi | 11 ++++++++++- 2 files changed, 18 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 97e1fb7ea932..9b1fe99d55b1 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -145,7 +145,7 @@ }; &enet0 { - tbi-handle = <&tbi1>; + tbi-handle = <&tbi0>; phy-handle = <&sgmii_phy2>; phy-connection-type = "sgmii"; status = "okay"; @@ -225,6 +225,13 @@ sgmii_phy2: ethernet-phy@2 { reg = <0x2>; }; + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { tbi1: tbi-phy@1f { reg = <0x1f>; device_type = "tbi-phy"; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index b4f2723ecd86..89eab1fd1f7f 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -701,7 +701,7 @@ }; mdio0: mdio@2d24000 { - compatible = "gianfar"; + compatible = "fsl,etsec2-mdio"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; @@ -709,6 +709,15 @@ <0x0 0x2d10030 0x0 0x4>; }; + mdio1: mdio@2d64000 { + compatible = "fsl,etsec2-mdio"; + device_type = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2d64000 0x0 0x4000>, + <0x0 0x2d50030 0x0 0x4>; + }; + ptp_clock@2d10e00 { compatible = "fsl,etsec-ptp"; reg = <0x0 0x2d10e00 0x0 0xb0>; -- cgit