From a02875c4cbd6f3d2f33d70cc158a19ef02d4b84f Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 26 Aug 2022 11:39:20 +0300 Subject: ARM: at91: pm: fix self-refresh for sama7g5 It has been discovered that on some parts, from time to time, self-refresh procedure doesn't work as expected. Debugging and investigating it proved that disabling AC DLL introduce glitches in RAM controllers which leads to unexpected behavior. This is confirmed as a hardware bug. DLL bypass disables 3 DLLs: 2 DX DLLs and AC DLL. Thus, keep only DX DLLs disabled. This introduce 6mA extra current consumption on VDDCORE when switching to any ULP mode or standby mode but the self-refresh procedure still works. Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5") Suggested-by: Frederic Schumacher Signed-off-by: Claudiu Beznea Tested-by: Cristian Birsan Link: https://lore.kernel.org/r/20220826083927.3107272-3-claudiu.beznea@microchip.com --- arch/arm/mach-at91/pm_suspend.S | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) (limited to 'arch/arm/mach-at91') diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index abe4ced33eda..ffed4d949042 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -172,9 +172,15 @@ sr_ena_2: /* Put DDR PHY's DLL in bypass mode for non-backup modes. */ cmp r7, #AT91_PM_BACKUP beq sr_ena_3 - ldr tmp1, [r3, #DDR3PHY_PIR] - orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP - str tmp1, [r3, #DDR3PHY_PIR] + + /* Disable DX DLLs. */ + ldr tmp1, [r3, #DDR3PHY_DX0DLLCR] + orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX0DLLCR] + + ldr tmp1, [r3, #DDR3PHY_DX1DLLCR] + orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX1DLLCR] sr_ena_3: /* Power down DDR PHY data receivers. */ @@ -221,10 +227,14 @@ sr_ena_3: bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0 str tmp1, [r3, #DDR3PHY_DSGCR] - /* Take DDR PHY's DLL out of bypass mode. */ - ldr tmp1, [r3, #DDR3PHY_PIR] - bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP - str tmp1, [r3, #DDR3PHY_PIR] + /* Enable DX DLLs. */ + ldr tmp1, [r3, #DDR3PHY_DX0DLLCR] + bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX0DLLCR] + + ldr tmp1, [r3, #DDR3PHY_DX1DLLCR] + bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX1DLLCR] /* Enable quasi-dynamic programming. */ mov tmp1, #0 -- cgit