From 86687cc42e538558d659826c0e54779960d20f09 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 26 Jul 2021 14:30:29 +0200 Subject: ARM: ixp4xx: Delete Omicron boardfiles These boards are reported obsoleted by the manufacturer and no known community users exist. Cc: Richard Cochran Signed-off-by: Linus Walleij --- arch/arm/mach-ixp4xx/omixp-setup.c | 298 ------------------------------------- 1 file changed, 298 deletions(-) delete mode 100644 arch/arm/mach-ixp4xx/omixp-setup.c (limited to 'arch/arm/mach-ixp4xx/omixp-setup.c') diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c deleted file mode 100644 index 8f2b8c473d7a..000000000000 --- a/arch/arm/mach-ixp4xx/omixp-setup.c +++ /dev/null @@ -1,298 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-ixp4xx/omixp-setup.c - * - * omicron ixp4xx board setup - * Copyright (C) 2009 OMICRON electronics GmbH - * - * based nslu2-setup.c, ixdp425-setup.c: - * Copyright (C) 2003-2004 MontaVista Software, Inc. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#include "irqs.h" - -static struct resource omixp_flash_resources[] = { - { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, -}; - -static struct mtd_partition omixp_partitions[] = { - { - .name = "Recovery Bootloader", - .size = 0x00020000, - .offset = 0, - }, { - .name = "Calibration Data", - .size = 0x00020000, - .offset = 0x00020000, - }, { - .name = "Recovery FPGA", - .size = 0x00020000, - .offset = 0x00040000, - }, { - .name = "Release Bootloader", - .size = 0x00020000, - .offset = 0x00060000, - }, { - .name = "Release FPGA", - .size = 0x00020000, - .offset = 0x00080000, - }, { - .name = "Kernel", - .size = 0x00160000, - .offset = 0x000a0000, - }, { - .name = "Filesystem", - .size = 0x00C00000, - .offset = 0x00200000, - }, { - .name = "Persistent Storage", - .size = 0x00200000, - .offset = 0x00E00000, - }, -}; - -static struct flash_platform_data omixp_flash_data[] = { - { - .map_name = "cfi_probe", - .parts = omixp_partitions, - .nr_parts = ARRAY_SIZE(omixp_partitions), - }, { - .map_name = "cfi_probe", - .parts = NULL, - .nr_parts = 0, - }, -}; - -static struct platform_device omixp_flash_device[] = { - { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { - .platform_data = &omixp_flash_data[0], - }, - .resource = &omixp_flash_resources[0], - .num_resources = 1, - }, { - .name = "IXP4XX-Flash", - .id = 1, - .dev = { - .platform_data = &omixp_flash_data[1], - }, - .resource = &omixp_flash_resources[1], - .num_resources = 1, - }, -}; - -/* Swap UART's - These boards have the console on UART2. The following - * configuration is used: - * ttyS0 .. UART2 - * ttyS1 .. UART1 - * This way standard images can be used with the kernel that expect - * the console on ttyS0. - */ -static struct resource omixp_uart_resources[] = { - { - .start = IXP4XX_UART2_BASE_PHYS, - .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, { - .start = IXP4XX_UART1_BASE_PHYS, - .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct plat_serial8250_port omixp_uart_data[] = { - { - .mapbase = IXP4XX_UART2_BASE_PHYS, - .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, { - .mapbase = IXP4XX_UART1_BASE_PHYS, - .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, { - /* list termination */ - } -}; - -static struct platform_device omixp_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = omixp_uart_data, - .num_resources = 2, - .resource = omixp_uart_resources, -}; - -static struct gpio_led mic256_led_pins[] = { - { - .name = "LED-A", - .gpio = 7, - }, -}; - -static struct gpio_led_platform_data mic256_led_data = { - .num_leds = ARRAY_SIZE(mic256_led_pins), - .leds = mic256_led_pins, -}; - -static struct platform_device mic256_leds = { - .name = "leds-gpio", - .id = -1, - .dev.platform_data = &mic256_led_data, -}; - -/* Built-in 10/100 Ethernet MAC interfaces */ -static struct resource ixp425_npeb_resources[] = { - { - .start = IXP4XX_EthB_BASE_PHYS, - .end = IXP4XX_EthB_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource ixp425_npec_resources[] = { - { - .start = IXP4XX_EthC_BASE_PHYS, - .end = IXP4XX_EthC_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct eth_plat_info ixdp425_plat_eth[] = { - { - .phy = 0, - .rxq = 3, - .txreadyq = 20, - }, { - .phy = 1, - .rxq = 4, - .txreadyq = 21, - }, -}; - -static struct platform_device ixdp425_eth[] = { - { - .name = "ixp4xx_eth", - .id = IXP4XX_ETH_NPEB, - .dev.platform_data = ixdp425_plat_eth, - .num_resources = ARRAY_SIZE(ixp425_npeb_resources), - .resource = ixp425_npeb_resources, - }, { - .name = "ixp4xx_eth", - .id = IXP4XX_ETH_NPEC, - .dev.platform_data = ixdp425_plat_eth + 1, - .num_resources = ARRAY_SIZE(ixp425_npec_resources), - .resource = ixp425_npec_resources, - }, -}; - - -static struct platform_device *devixp_pldev[] __initdata = { - &omixp_uart, - &omixp_flash_device[0], - &ixdp425_eth[0], - &ixdp425_eth[1], -}; - -static struct platform_device *mic256_pldev[] __initdata = { - &omixp_uart, - &omixp_flash_device[0], - &mic256_leds, - &ixdp425_eth[0], - &ixdp425_eth[1], -}; - -static struct platform_device *miccpt_pldev[] __initdata = { - &omixp_uart, - &omixp_flash_device[0], - &omixp_flash_device[1], - &ixdp425_eth[0], - &ixdp425_eth[1], -}; - -static void __init omixp_init(void) -{ - ixp4xx_sys_init(); - - /* 16MiB Boot Flash */ - omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0); - omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0); - - /* 32 MiB Data Flash */ - omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2); - omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2); - - if (machine_is_devixp()) - platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev)); - else if (machine_is_miccpt()) - platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev)); - else if (machine_is_mic256()) - platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev)); -} - -#ifdef CONFIG_MACH_DEVIXP -MACHINE_START(DEVIXP, "Omicron DEVIXP") - .atag_offset = 0x100, - .map_io = ixp4xx_map_io, - .init_early = ixp4xx_init_early, - .init_irq = ixp4xx_init_irq, - .init_time = ixp4xx_timer_init, - .init_machine = omixp_init, - .restart = ixp4xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_MICCPT -MACHINE_START(MICCPT, "Omicron MICCPT") - .atag_offset = 0x100, - .map_io = ixp4xx_map_io, - .init_early = ixp4xx_init_early, - .init_irq = ixp4xx_init_irq, - .init_time = ixp4xx_timer_init, - .init_machine = omixp_init, -#if defined(CONFIG_PCI) - .dma_zone_size = SZ_64M, -#endif - .restart = ixp4xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_MIC256 -MACHINE_START(MIC256, "Omicron MIC256") - .atag_offset = 0x100, - .map_io = ixp4xx_map_io, - .init_early = ixp4xx_init_early, - .init_irq = ixp4xx_init_irq, - .init_time = ixp4xx_timer_init, - .init_machine = omixp_init, - .restart = ixp4xx_restart, -MACHINE_END -#endif -- cgit