From f7519d8c8290765a9408a52db4ba4a368ff72ca5 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 22:54:18 +0100 Subject: ARM: OMAP1: ams-delta: register latch dependent devices later In preparation to converting Amstrad Delta on-board latches to basic_mmio_gpio devices, registration of platform devices which depend on latches and will require initialization of their GPIO pins first, should be moved out of .machine_init down to late_initcall level, as the gpio-generic driver is not available until device_initcall time. The latch reset operation, which will be replaced with GPIO initialization, must also be moved to late_initcall for the same reason. Since there was already another, separate arch_initcall function for setting up one of those latch dependent devices, the on-board modem device, reuse that function, i.e., rename it to a name that matches the new purpose, extend with other device setup relocated from .machine_init, and move down to the late_initcall level. While being at it, add missing gpio_free() in case the modem platform device registration fails. Thanks to Tony Lindgren who suggested this approach instead of shifting up the gpio-generic driver initialization. In addition, defer registration of the Amstrad Delta ASoC and serio devices, done from their device driver files, until late_initcall time, as those drivers will depend on their GPIO pins already requested from the board late_init() function until updated to register their GPIO pins themselves. Signed-off-by: Janusz Krzysztofik Acked-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) (limited to 'arch/arm/mach-omap1/board-ams-delta.c') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index b0f15d234a12..50987c91690f 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -275,11 +275,14 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { }; static struct platform_device *ams_delta_devices[] __initdata = { - &ams_delta_nand_device, &ams_delta_kp_device, + &ams_delta_camera_device, +}; + +static struct platform_device *late_devices[] __initdata = { + &ams_delta_nand_device, &ams_delta_lcd_device, &ams_delta_led_device, - &ams_delta_camera_device, }; static void __init ams_delta_init(void) @@ -307,9 +310,6 @@ static void __init ams_delta_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - /* Clear latch2 (NAND, LCD, modem enable) */ - ams_delta_latch2_write(~0, 0); - omap1_usb_init(&ams_delta_usb_config); omap1_set_camera_info(&ams_delta_camera_platform_data); #ifdef CONFIG_LEDS_TRIGGERS @@ -345,13 +345,18 @@ static struct platform_device ams_delta_modem_device = { }, }; -static int __init ams_delta_modem_init(void) +static int __init late_init(void) { int err; if (!machine_is_ams_delta()) return -ENODEV; + /* Clear latch2 (NAND, LCD, modem enable) */ + ams_delta_latch2_write(~0, 0); + + platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); + omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); @@ -367,9 +372,16 @@ static int __init ams_delta_modem_init(void) AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); - return platform_device_register(&ams_delta_modem_device); + err = platform_device_register(&ams_delta_modem_device); + if (err) + goto gpio_free; + return 0; + +gpio_free: + gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + return err; } -arch_initcall(ams_delta_modem_init); +late_initcall(late_init); static void __init ams_delta_map_io(void) { -- cgit From 937eb4bb00588571f223eade260f9b509bf223ab Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 03:24:21 +0100 Subject: ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio Once ready, ams-delta specific device drivers currently calling custom ams_delta_latch[12]_write() functions can be updated to call generic gpio_set_value() instead, which will make them less platform dependent. Even more, some custom ams-delta only drivers can perhaps be dropped from the tree after converting selected ams-delta platform devices to follow generic GPIO based device models. The latch_gpios[] table is initially filled with all latch1 and latch2 GPIO pins in order to register and initialize them from the board file until those are handled by respective existing device drivers (leds, nand, lcd, serio, asoc, serial). That table will get almost empty after the transision process is completed, holding only pins not used by any drivers / connected to unused devices, in order to initialize them from the board file for power saving purposes. The new ams_delta_latch_write() function is a unified replacement for those removed ams_delta_latch[12]_write(), and serves as a temporary wrapper over gpio_set_value(), providing the old API for those not yet updated device drivers, and will be removed after all custom drivers are converted or replaced. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 237 +++++++++++++++++++++++++++++----- 1 file changed, 207 insertions(+), 30 deletions(-) (limited to 'arch/arm/mach-omap1/board-ams-delta.c') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 50987c91690f..cff2711dc259 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include #include #include #include @@ -40,9 +41,6 @@ #include -static u8 ams_delta_latch1_reg; -static u16 ams_delta_latch2_reg; - static const unsigned int ams_delta_keymap[] = { KEY(0, 0, KEY_F1), /* Advert */ @@ -121,39 +119,32 @@ static const unsigned int ams_delta_keymap[] = { KEY(7, 3, KEY_LEFTCTRL), /* Vol down */ }; -void ams_delta_latch1_write(u8 mask, u8 value) -{ - ams_delta_latch1_reg &= ~mask; - ams_delta_latch1_reg |= value; - *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg; -} - -void ams_delta_latch2_write(u16 mask, u16 value) -{ - ams_delta_latch2_reg &= ~mask; - ams_delta_latch2_reg |= value; - *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; -} +#define LATCH1_PHYS 0x01000000 +#define LATCH1_VIRT 0xEA000000 +#define MODEM_PHYS 0x04000000 +#define MODEM_VIRT 0xEB000000 +#define LATCH2_PHYS 0x08000000 +#define LATCH2_VIRT 0xEC000000 static struct map_desc ams_delta_io_desc[] __initdata = { /* AMS_DELTA_LATCH1 */ { - .virtual = AMS_DELTA_LATCH1_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), + .virtual = LATCH1_VIRT, + .pfn = __phys_to_pfn(LATCH1_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_LATCH2 */ { - .virtual = AMS_DELTA_LATCH2_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), + .virtual = LATCH2_VIRT, + .pfn = __phys_to_pfn(LATCH2_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_MODEM */ { - .virtual = AMS_DELTA_MODEM_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), + .virtual = MODEM_VIRT, + .pfn = __phys_to_pfn(MODEM_PHYS), .length = 0x01000000, .type = MT_DEVICE } @@ -173,6 +164,190 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = { { OMAP_TAG_LCD, &ams_delta_lcd_config }, }; +static struct resource latch1_resources[] __initconst = { + [0] = { + .name = "dat", + .start = LATCH1_PHYS, + .end = LATCH1_PHYS + (AMS_DELTA_LATCH1_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +static struct bgpio_pdata latch1_pdata __initconst = { + .base = AMS_DELTA_LATCH1_GPIO_BASE, + .ngpio = AMS_DELTA_LATCH1_NGPIO, +}; + +static struct platform_device latch1_gpio_device = { + .name = "basic-mmio-gpio", + .id = 0, + .resource = latch1_resources, + .num_resources = ARRAY_SIZE(latch1_resources), + .dev = { + .platform_data = &latch1_pdata, + }, +}; + +static struct resource latch2_resources[] __initconst = { + [0] = { + .name = "dat", + .start = LATCH2_PHYS, + .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +static struct bgpio_pdata latch2_pdata __initconst = { + .base = AMS_DELTA_LATCH2_GPIO_BASE, + .ngpio = AMS_DELTA_LATCH2_NGPIO, +}; + +static struct platform_device latch2_gpio_device = { + .name = "basic-mmio-gpio", + .id = 1, + .resource = latch2_resources, + .num_resources = ARRAY_SIZE(latch2_resources), + .dev = { + .platform_data = &latch2_pdata, + }, +}; + +static struct gpio latch_gpios[] __initconst = { + { + .gpio = AMS_DELTA_GPIO_PIN_LED_CAMERA, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_camera", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LED_ADVERT, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_advert", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LED_EMAIL, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_email", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LED_HANDSFREE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_handsfree", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LED_VOICEMAIL, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_voicemail", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LED_VOICE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_voice", + }, + { + .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 6, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit1", + }, + { + .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 7, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit2", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, + .flags = GPIOF_OUT_INIT_LOW, + .label = "lcd_vblen", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP, + .flags = GPIOF_OUT_INIT_LOW, + .label = "lcd_ndisp", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_nce", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NRE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_nre", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NWP, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_nwp", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NWE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_nwe", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_ALE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_ale", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_CLE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_cle", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, + .flags = GPIOF_OUT_INIT_LOW, + .label = "keybrd_pwr", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT, + .flags = GPIOF_OUT_INIT_LOW, + .label = "keybrd_dataout", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_rstin", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_cmdvcc", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, + .flags = GPIOF_OUT_INIT_LOW, + .label = "modem_nreset", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "modem_codec", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash1", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash2", + }, +}; + +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) +{ + int bit = 0; + u16 bitpos = 1 << bit; + + for (; bit < ngpio; bit++, bitpos = bitpos << 1) { + if (!(mask & bitpos)) + continue; + gpio_set_value(base + bit, (value & bitpos) != 0); + } +} +EXPORT_SYMBOL(ams_delta_latch_write); + static struct resource ams_delta_nand_resources[] = { [0] = { .start = OMAP1_MPUIO_BASE, @@ -275,11 +450,13 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { }; static struct platform_device *ams_delta_devices[] __initdata = { + &latch1_gpio_device, + &latch2_gpio_device, &ams_delta_kp_device, &ams_delta_camera_device, }; -static struct platform_device *late_devices[] __initdata = { +static struct platform_device *late_devices[] __initconst = { &ams_delta_nand_device, &ams_delta_lcd_device, &ams_delta_led_device, @@ -325,8 +502,8 @@ static void __init ams_delta_init(void) static struct plat_serial8250_port ams_delta_modem_ports[] = { { - .membase = IOMEM(AMS_DELTA_MODEM_VIRT), - .mapbase = AMS_DELTA_MODEM_PHYS, + .membase = IOMEM(MODEM_VIRT), + .mapbase = MODEM_PHYS, .irq = -EINVAL, /* changed later */ .flags = UPF_BOOT_AUTOCONF, .irqflags = IRQF_TRIGGER_RISING, @@ -352,8 +529,11 @@ static int __init late_init(void) if (!machine_is_ams_delta()) return -ENODEV; - /* Clear latch2 (NAND, LCD, modem enable) */ - ams_delta_latch2_write(~0, 0); + err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); + if (err) { + pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); + return err; + } platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); @@ -399,6 +579,3 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .init_machine = ams_delta_init, .timer = &omap1_timer, MACHINE_END - -EXPORT_SYMBOL(ams_delta_latch1_write); -EXPORT_SYMBOL(ams_delta_latch2_write); -- cgit From 5ca6180fa6d7333fb5fabf30420b0e3cc32dd731 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 00:08:53 +0100 Subject: ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio Now that the Amstrad Delta on-board latches have been converted to GPIO devices, use the generic driver to control on-board LEDs which hang off those latches. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 87 +++++++++++++++++++---------------- 1 file changed, 48 insertions(+), 39 deletions(-) (limited to 'arch/arm/mach-omap1/board-ams-delta.c') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index cff2711dc259..034d0094e93a 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -164,18 +164,21 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = { { OMAP_TAG_LCD, &ams_delta_lcd_config }, }; +#define LATCH1_GPIO_BASE 232 +#define LATCH1_NGPIO 8 + static struct resource latch1_resources[] __initconst = { [0] = { .name = "dat", .start = LATCH1_PHYS, - .end = LATCH1_PHYS + (AMS_DELTA_LATCH1_NGPIO - 1) / 8, + .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8, .flags = IORESOURCE_MEM, }, }; static struct bgpio_pdata latch1_pdata __initconst = { - .base = AMS_DELTA_LATCH1_GPIO_BASE, - .ngpio = AMS_DELTA_LATCH1_NGPIO, + .base = LATCH1_GPIO_BASE, + .ngpio = LATCH1_NGPIO, }; static struct platform_device latch1_gpio_device = { @@ -214,42 +217,12 @@ static struct platform_device latch2_gpio_device = { static struct gpio latch_gpios[] __initconst = { { - .gpio = AMS_DELTA_GPIO_PIN_LED_CAMERA, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_camera", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LED_ADVERT, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_advert", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LED_EMAIL, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_email", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LED_HANDSFREE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_handsfree", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LED_VOICEMAIL, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_voicemail", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LED_VOICE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_voice", - }, - { - .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 6, + .gpio = LATCH1_GPIO_BASE + 6, .flags = GPIOF_OUT_INIT_LOW, .label = "dockit1", }, { - .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 7, + .gpio = LATCH1_GPIO_BASE + 7, .flags = GPIOF_OUT_INIT_LOW, .label = "dockit2", }, @@ -399,9 +372,45 @@ static struct platform_device ams_delta_lcd_device = { .id = -1, }; -static struct platform_device ams_delta_led_device = { - .name = "ams-delta-led", - .id = -1 +static struct gpio_led gpio_leds[] __initconst = { + { + .name = "camera", + .gpio = LATCH1_GPIO_BASE + 0, + .default_state = LEDS_GPIO_DEFSTATE_OFF, +#ifdef CONFIG_LEDS_TRIGGERS + .default_trigger = "ams_delta_camera", +#endif + }, + { + .name = "advert", + .gpio = LATCH1_GPIO_BASE + 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "email", + .gpio = LATCH1_GPIO_BASE + 2, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "handsfree", + .gpio = LATCH1_GPIO_BASE + 3, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voicemail", + .gpio = LATCH1_GPIO_BASE + 4, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voice", + .gpio = LATCH1_GPIO_BASE + 5, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static struct gpio_led_platform_data leds_pdata __initconst = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), }; static struct i2c_board_info ams_delta_camera_board_info[] = { @@ -459,7 +468,6 @@ static struct platform_device *ams_delta_devices[] __initdata = { static struct platform_device *late_devices[] __initconst = { &ams_delta_nand_device, &ams_delta_lcd_device, - &ams_delta_led_device, }; static void __init ams_delta_init(void) @@ -493,6 +501,7 @@ static void __init ams_delta_init(void) led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); #endif + gpio_led_register_device(-1, &leds_pdata); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); ams_delta_init_fiq(); -- cgit From 68f0676699fb0e0b18feb8459c35ecdfe3127b3d Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 00:08:55 +0100 Subject: MTD: NAND: ams-delta: use GPIO instead of custom I/O Don't use Amstrad Delta custom I/O functions for controlling the device, use GPIO API instead. While being at it, add missing gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB). Signed-off-by: Janusz Krzysztofik Cc: David Woodhouse Reviewed-by: Artem Bityutskiy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 30 ------------------------------ 1 file changed, 30 deletions(-) (limited to 'arch/arm/mach-omap1/board-ams-delta.c') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 034d0094e93a..cc6f96249e77 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -236,36 +236,6 @@ static struct gpio latch_gpios[] __initconst = { .flags = GPIOF_OUT_INIT_LOW, .label = "lcd_ndisp", }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_nce", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NRE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_nre", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NWP, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_nwp", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NWE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_nwe", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_ALE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_ale", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_CLE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_cle", - }, { .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, .flags = GPIOF_OUT_INIT_LOW, -- cgit From a218d19f6a91c076c7ed8a7c0082f777248c5394 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 00:08:56 +0100 Subject: omapfb: lcd_ams_delta: drive control lines over GPIO Don't use Amstrad Delta custom I/O functions any longer, use GPIO API instead. Signed-off-by: Janusz Krzysztofik Acked-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'arch/arm/mach-omap1/board-ams-delta.c') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index cc6f96249e77..3aba8f99cc7e 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -226,16 +226,6 @@ static struct gpio latch_gpios[] __initconst = { .flags = GPIOF_OUT_INIT_LOW, .label = "dockit2", }, - { - .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, - .flags = GPIOF_OUT_INIT_LOW, - .label = "lcd_vblen", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP, - .flags = GPIOF_OUT_INIT_LOW, - .label = "lcd_ndisp", - }, { .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, .flags = GPIOF_OUT_INIT_LOW, -- cgit From 8d09a1bb3147ddbcf0a9483021ca699c54c54732 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 23:10:34 +0100 Subject: input: serio: ams-delta: toggle keyboard power over GPIO Don't use Amstrad Delta custom I/O functions once GPIO interface is available for the underlying hardware. While requesting and initializing GPIO pins used, also take care of one extra pin KEYBRD_DATAOUT which, even if not used by the driver, belongs to the device and affects its functioning. Once done, move the driver initialization back to the device_initcall level, reverting the temporary chane introduced with patch 1/7 "ARM: OMAP1: ams-delta: register latch dependent devices later". That change is no longer required once the driver takes care of registering used GPIO pins, and it's better to initialize the device before others using the latch2 based GPIO pins, otherwise a garbage is reported on boot, perhaps due to random data already captured by the FIQ handler while the keyboard related latch bits are written with random values during initialization of those other latch2 dependent devices. Signed-off-by: Janusz Krzysztofik Acked-by: Dmitry Torokhov [tony@atomide.com: renamed _gpios to ams_delta_gpios] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'arch/arm/mach-omap1/board-ams-delta.c') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 3aba8f99cc7e..673cf21a90f8 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -226,16 +226,6 @@ static struct gpio latch_gpios[] __initconst = { .flags = GPIOF_OUT_INIT_LOW, .label = "dockit2", }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, - .flags = GPIOF_OUT_INIT_LOW, - .label = "keybrd_pwr", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT, - .flags = GPIOF_OUT_INIT_LOW, - .label = "keybrd_dataout", - }, { .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, .flags = GPIOF_OUT_INIT_LOW, -- cgit