From ba64792ff9b4612ab20623118e0b616e760ecdf7 Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Fri, 14 Jul 2017 18:16:43 +0530 Subject: ARM: OMAP2+: hsmmc.c: Remove dead code Most platforms using OMAP hsmmc driver have switched to device tree for passing platform data to omap_hsmmc.c driver. The hsmmc.c file in mach-omap2 exists only to support pandora board which uses wl1251 driver in legacy platform data mode. Hence, remove the dead code not used by the pandora board. Signed-off-by: Faiz Abbas Acked-by: Tony Lindgren Signed-off-by: Ulf Hansson --- arch/arm/mach-omap2/hsmmc.c | 239 +------------------------------------------- arch/arm/mach-omap2/hsmmc.h | 9 -- 2 files changed, 2 insertions(+), 246 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index be517b048762..5b614388d72f 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -32,120 +32,6 @@ static u16 control_devconf1_offset; #define HSMMC_NAME_LEN 9 -static void omap_hsmmc1_before_set_reg(struct device *dev, - int power_on, int vdd) -{ - u32 reg, prog_io; - struct omap_hsmmc_platform_data *mmc = dev->platform_data; - - if (mmc->remux) - mmc->remux(dev, power_on); - - /* - * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the - * card with Vcc regulator (from twl4030 or whatever). OMAP has both - * 1.8V and 3.0V modes, controlled by the PBIAS register. - * - * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which - * is most naturally TWL VSIM; those pins also use PBIAS. - * - * FIXME handle VMMC1A as needed ... - */ - if (power_on) { - if (cpu_is_omap2430()) { - reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1); - if ((1 << vdd) >= MMC_VDD_30_31) - reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE; - else - reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE; - omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1); - } - - if (mmc->internal_clock) { - reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - reg |= OMAP2_MMCSDIO1ADPCLKISEL; - omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0); - } - - reg = omap_ctrl_readl(control_pbias_offset); - if (cpu_is_omap3630()) { - /* Set MMC I/O to 52MHz */ - prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); - prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL; - omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1); - } else { - reg |= OMAP2_PBIASSPEEDCTRL0; - } - reg &= ~OMAP2_PBIASLITEPWRDNZ0; - omap_ctrl_writel(reg, control_pbias_offset); - } else { - reg = omap_ctrl_readl(control_pbias_offset); - reg &= ~OMAP2_PBIASLITEPWRDNZ0; - omap_ctrl_writel(reg, control_pbias_offset); - } -} - -static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd) -{ - u32 reg; - - /* 100ms delay required for PBIAS configuration */ - msleep(100); - - if (power_on) { - reg = omap_ctrl_readl(control_pbias_offset); - reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0); - if ((1 << vdd) <= MMC_VDD_165_195) - reg &= ~OMAP2_PBIASLITEVMODE0; - else - reg |= OMAP2_PBIASLITEVMODE0; - omap_ctrl_writel(reg, control_pbias_offset); - } else { - reg = omap_ctrl_readl(control_pbias_offset); - reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 | - OMAP2_PBIASLITEVMODE0); - omap_ctrl_writel(reg, control_pbias_offset); - } -} - -static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc) -{ - u32 reg; - - reg = omap_ctrl_readl(control_devconf1_offset); - if (mmc->internal_clock) - reg |= OMAP2_MMCSDIO2ADPCLKISEL; - else - reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); -} - -static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd) -{ - struct omap_hsmmc_platform_data *mmc = dev->platform_data; - - if (mmc->remux) - mmc->remux(dev, power_on); - - if (power_on) - hsmmc2_select_input_clk_src(mmc); -} - -static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd) -{ - struct omap_hsmmc_platform_data *mmc = dev->platform_data; - - if (power_on) - hsmmc2_select_input_clk_src(mmc); - - return 0; -} - -static int nop_mmc_set_power(struct device *dev, int power_on, int vdd) -{ - return 0; -} - static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, struct omap_hsmmc_platform_data *mmc) { @@ -157,101 +43,11 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, return -ENOMEM; } - if (c->name) - strncpy(hc_name, c->name, HSMMC_NAME_LEN); - else - snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", - c->mmc, 1); + snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1); mmc->name = hc_name; mmc->caps = c->caps; - mmc->internal_clock = !c->ext_clock; mmc->reg_offset = 0; - if (c->cover_only) { - /* detect if mobile phone cover removed */ - mmc->gpio_cd = -EINVAL; - mmc->gpio_cod = c->gpio_cd; - } else { - /* card detect pin on the mmc socket itself */ - mmc->gpio_cd = c->gpio_cd; - mmc->gpio_cod = -EINVAL; - } - mmc->gpio_wp = c->gpio_wp; - - mmc->remux = c->remux; - mmc->init_card = c->init_card; - - if (c->nonremovable) - mmc->nonremovable = 1; - - /* - * NOTE: MMC slots should have a Vcc regulator set up. - * This may be from a TWL4030-family chip, another - * controllable regulator, or a fixed supply. - * - * temporary HACK: ocr_mask instead of fixed supply - */ - if (soc_is_am35xx()) - mmc->ocr_mask = MMC_VDD_165_195 | - MMC_VDD_26_27 | - MMC_VDD_27_28 | - MMC_VDD_29_30 | - MMC_VDD_30_31 | - MMC_VDD_31_32; - else - mmc->ocr_mask = c->ocr_mask; - - if (!soc_is_am35xx()) - mmc->features |= HSMMC_HAS_PBIAS; - - switch (c->mmc) { - case 1: - if (mmc->features & HSMMC_HAS_PBIAS) { - /* on-chip level shifting via PBIAS0/PBIAS1 */ - mmc->before_set_reg = - omap_hsmmc1_before_set_reg; - mmc->after_set_reg = - omap_hsmmc1_after_set_reg; - } - - if (soc_is_am35xx()) - mmc->set_power = nop_mmc_set_power; - - /* OMAP3630 HSMMC1 supports only 4-bit */ - if (cpu_is_omap3630() && - (c->caps & MMC_CAP_8_BIT_DATA)) { - c->caps &= ~MMC_CAP_8_BIT_DATA; - c->caps |= MMC_CAP_4_BIT_DATA; - mmc->caps = c->caps; - } - break; - case 2: - if (soc_is_am35xx()) - mmc->set_power = am35x_hsmmc2_set_power; - - if (c->ext_clock) - c->transceiver = 1; - if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { - c->caps &= ~MMC_CAP_8_BIT_DATA; - c->caps |= MMC_CAP_4_BIT_DATA; - } - if (mmc->features & HSMMC_HAS_PBIAS) { - /* off-chip level shifting, or none */ - mmc->before_set_reg = hsmmc2_before_set_reg; - mmc->after_set_reg = NULL; - } - break; - case 3: - case 4: - case 5: - mmc->before_set_reg = NULL; - mmc->after_set_reg = NULL; - break; - default: - pr_err("MMC%d configuration not supported!\n", c->mmc); - kfree(hc_name); - return -ENODEV; - } return 0; } @@ -260,7 +56,6 @@ static int omap_hsmmc_done; void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) { struct platform_device *pdev; - struct omap_hsmmc_platform_data *mmc_pdata; int res; if (omap_hsmmc_done != 1) @@ -269,32 +64,12 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) omap_hsmmc_done++; for (; c->mmc; c++) { - if (!c->deferred) - continue; - pdev = c->pdev; if (!pdev) continue; - - mmc_pdata = pdev->dev.platform_data; - if (!mmc_pdata) - continue; - - if (c->cover_only) { - /* detect if mobile phone cover removed */ - mmc_pdata->gpio_cd = -EINVAL; - mmc_pdata->gpio_cod = c->gpio_cd; - } else { - /* card detect pin on the mmc socket itself */ - mmc_pdata->gpio_cd = c->gpio_cd; - mmc_pdata->gpio_cod = -EINVAL; - } - mmc_pdata->gpio_wp = c->gpio_wp; - res = omap_device_register(pdev); if (res) - pr_err("Could not late init MMC %s\n", - c->name); + pr_err("Could not late init MMC\n"); } } @@ -336,13 +111,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, if (oh->dev_attr != NULL) { mmc_dev_attr = oh->dev_attr; mmc_data->controller_flags = mmc_dev_attr->flags; - /* - * erratum 2.1.1.128 doesn't apply if board has - * a transceiver is attached - */ - if (hsmmcinfo->transceiver) - mmc_data->controller_flags &= - ~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ; } pdev = platform_device_alloc(name, ctrl_nr - 1); @@ -367,9 +135,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, hsmmcinfo->pdev = pdev; - if (hsmmcinfo->deferred) - goto free_mmc; - res = omap_device_register(pdev); if (res) { pr_err("Could not register od for %s\n", name); diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 69b619ddc765..af9af5094ec3 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -12,18 +12,9 @@ struct omap2_hsmmc_info { u8 mmc; /* controller 1/2/3 */ u32 caps; /* 4/8 wires and any additional host * capabilities OR'd (ref. linux/mmc/host.h) */ - bool transceiver; /* MMC-2 option */ - bool ext_clock; /* use external pin for input clock */ - bool cover_only; /* No card detect - just cover switch */ - bool nonremovable; /* Nonremovable e.g. eMMC */ - bool deferred; /* mmc needs a deferred probe */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ - char *name; /* or NULL for default */ struct platform_device *pdev; /* mmc controller instance */ - int ocr_mask; /* temporary HACK */ - /* Remux (pad configuration) when powering on/off */ - void (*remux)(struct device *dev, int power_on); /* init some special card */ void (*init_card)(struct mmc_card *card); }; -- cgit