From 4898de3d15d8ba34aa7a1b0f753a476d52ebdf92 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 20 Dec 2012 19:37:32 +0800 Subject: ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructures this patch adds tick timer, smp entries and generic DT machine for SiRFmarco dual-core SMP chips. with the added marco, we change the defconfig, using the same defconfig, we get a zImage which can work on both prima2 and marco. Signed-off-by: Barry Song Cc: Mark Rutland --- arch/arm/mach-prima2/platsmp.c | 163 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 163 insertions(+) create mode 100644 arch/arm/mach-prima2/platsmp.c (limited to 'arch/arm/mach-prima2/platsmp.c') diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c new file mode 100644 index 000000000000..2395022bc733 --- /dev/null +++ b/arch/arm/mach-prima2/platsmp.c @@ -0,0 +1,163 @@ +/* + * plat smp support for CSR Marco dual-core SMP SoCs + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "common.h" + +static void __iomem *scu_base; +static void __iomem *rsc_base; + +static DEFINE_SPINLOCK(boot_lock); + +static struct map_desc scu_io_desc __initdata = { + .length = SZ_4K, + .type = MT_DEVICE, +}; + +void __init sirfsoc_map_scu(void) +{ + unsigned long base; + + /* Get SCU base */ + asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base)); + + scu_io_desc.virtual = SIRFSOC_VA(base); + scu_io_desc.pfn = __phys_to_pfn(base); + iotable_init(&scu_io_desc, 1); + + scu_base = (void __iomem *)SIRFSOC_VA(base); +} + +static void __cpuinit sirfsoc_secondary_init(unsigned int cpu) +{ + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_secondary_init(0); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + smp_wmb(); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +static struct of_device_id rsc_ids[] = { + { .compatible = "sirf,marco-rsc" }, + {}, +}; + +static int __cpuinit sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + struct device_node *np; + + np = of_find_matching_node(NULL, rsc_ids); + if (!np) + return -ENODEV; + + rsc_base = of_iomap(np, 0); + if (!rsc_base) + return -ENOMEM; + + /* + * write the address of secondary startup into the sram register + * at offset 0x2C, then write the magic number 0x3CAF5D62 to the + * RSC register at offset 0x28, which is what boot rom code is + * waiting for. This would wake up the secondary core from WFE + */ +#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2C + __raw_writel(virt_to_phys(sirfsoc_secondary_startup), + rsc_base + SIRFSOC_CPU1_JUMPADDR_OFFSET); + +#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x28 + __raw_writel(0x3CAF5D62, + rsc_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET); + + /* make sure write buffer is drained */ + mb(); + + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + pen_release = cpu_logical_map(cpu); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); + + /* + * Send the secondary CPU SEV, thereby causing the boot monitor to read + * the JUMPADDR and WAKEMAGIC, and branch to the address found there. + */ + dsb_sev(); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +static void __init sirfsoc_smp_init_cpus(void) +{ + set_smp_cross_call(gic_raise_softirq); +} + +static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus) +{ + scu_enable(scu_base); +} + +struct smp_operations sirfsoc_smp_ops __initdata = { + .smp_init_cpus = sirfsoc_smp_init_cpus, + .smp_prepare_cpus = sirfsoc_smp_prepare_cpus, + .smp_secondary_init = sirfsoc_secondary_init, + .smp_boot_secondary = sirfsoc_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = sirfsoc_cpu_die, +#endif +}; -- cgit