From 71b9114d2c13a648fbe6523dd859e611c316ad90 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 2 Sep 2019 17:47:55 +0200 Subject: ARM: s3c: move into a common directory s3c24xx and s3c64xx have a lot in common, but are split across three separate directories, which makes the interaction of the header files more complicated than necessary. Move all three directories into a new mach-s3c, with a minimal set of changes to each file. Signed-off-by: Arnd Bergmann [krzk: Rebase, add s3c24xx and s3c64xx suffix to several files, add SPDX headers to new files, remove plat-samsung from MAINTAINERS] Co-developed-by: Krzysztof Kozlowski Signed-off-by: Krzysztof Kozlowski https://lore.kernel.org/r/20200806182059.2431-39-krzk@kernel.org --- arch/arm/mach-s3c64xx/Kconfig | 350 ------------------------------------------ 1 file changed, 350 deletions(-) delete mode 100644 arch/arm/mach-s3c64xx/Kconfig (limited to 'arch/arm/mach-s3c64xx/Kconfig') diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig deleted file mode 100644 index f3fcb570edf5..000000000000 --- a/arch/arm/mach-s3c64xx/Kconfig +++ /dev/null @@ -1,350 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Copyright 2008 Openmoko, Inc. -# Simtec Electronics, Ben Dooks - -menuconfig ARCH_S3C64XX - bool "Samsung S3C64XX" - depends on ARCH_MULTI_V6 - select ARM_AMBA - select ARM_VIC - select CLKSRC_SAMSUNG_PWM - select COMMON_CLK_SAMSUNG - select GPIO_SAMSUNG if ATAGS - select GPIOLIB - select HAVE_S3C2410_I2C if I2C - select HAVE_TCM - select PLAT_SAMSUNG - select PM_GENERIC_DOMAINS if PM - select S3C_DEV_NAND if ATAGS - select S3C_GPIO_TRACK if ATAGS - select S3C2410_WATCHDOG - select SAMSUNG_ATAGS if ATAGS - select SAMSUNG_WAKEMASK if PM - select WATCHDOG - help - Samsung S3C64XX series based systems - -if ARCH_S3C64XX - -# Configuration options for the S3C6410 CPU - -config CPU_S3C6400 - bool - help - Enable S3C6400 CPU support - -config CPU_S3C6410 - bool - help - Enable S3C6410 CPU support - -config S3C64XX_PL080 - def_bool DMADEVICES - select AMBA_PL08X - -config S3C64XX_SETUP_SDHCI - bool - select S3C64XX_SETUP_SDHCI_GPIO - help - Internal configuration for default SDHCI setup for S3C6400 and - S3C6410 SoCs. - -config S3C64XX_DEV_ONENAND1 - bool - help - Compile in platform device definition for OneNAND1 controller - -config SAMSUNG_DEV_BACKLIGHT - bool - depends on SAMSUNG_DEV_PWM - help - Compile in platform device definition LCD backlight with PWM Timer - -# platform specific device setup - -config S3C64XX_SETUP_I2C0 - bool - default y - help - Common setup code for i2c bus 0. - - Note, currently since i2c0 is always compiled, this setup helper - is always compiled with it. - -config S3C64XX_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S3C64XX_SETUP_IDE - bool - help - Common setup code for S3C64XX IDE. - -config S3C64XX_SETUP_FB_24BPP - bool - help - Common setup code for S3C64XX with an 24bpp RGB display helper. - -config S3C64XX_SETUP_KEYPAD - bool - help - Common setup code for S3C64XX KEYPAD GPIO configurations - -config S3C64XX_SETUP_SDHCI_GPIO - bool - help - Common setup code for S3C64XX SDHCI GPIO configurations - -config S3C64XX_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations - -config S3C64XX_SETUP_USB_PHY - bool - help - Common setup code for USB PHY controller - -# S36400 Macchine support - -config MACH_SMDK6400 - bool "SMDK6400" - depends on ATAGS - select CPU_S3C6400 - select S3C64XX_SETUP_SDHCI - select S3C_DEV_HSMMC1 - help - Machine support for the Samsung SMDK6400 - -# S3C6410 machine support - -config MACH_ANW6410 - bool "A&W6410" - depends on ATAGS - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C_DEV_FB - help - Machine support for the A&W6410 - -config MACH_MINI6410 - bool "MINI6410" - depends on ATAGS - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - help - Machine support for the FriendlyARM MINI6410 - -config MACH_REAL6410 - bool "REAL6410" - depends on ATAGS - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - help - Machine support for the CoreWind REAL6410 - -config MACH_SMDK6410 - bool "SMDK6410" - depends on ATAGS - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_I2C1 - select S3C64XX_SETUP_IDE - select S3C64XX_SETUP_KEYPAD - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_USB_PHY - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_IDE - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for the Samsung SMDK6410 - -# At least some of the SMDK6410s were shipped with the card detect -# for the MMC/SD slots connected to the same input. This means that -# either the boards need to be altered to have channel0 to an alternate -# configuration or that only one slot can be used. - -choice - prompt "SMDK6410 MMC/SD slot setup" - depends on MACH_SMDK6410 - -config SMDK6410_SD_CH0 - bool "Use channel 0 only" - depends on MACH_SMDK6410 - help - Select CON7 (channel 0) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -config SMDK6410_SD_CH1 - bool "Use channel 1 only" - depends on MACH_SMDK6410 - help - Select CON6 (channel 1) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -endchoice - -config SMDK6410_WM1190_EV1 - bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" - depends on MACH_SMDK6410 - depends on I2C=y - select MFD_WM8350_I2C - select REGULATOR - select REGULATOR_WM8350 - help - The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC - and audio daughtercard for the Samsung SMDK6410 reference - platform. Enabling this option will build support for this - module into the kernel. The presence of the module will be - detected at runtime so the resulting kernel can be used - with or without the 1190-EV1 fitted. - -config SMDK6410_WM1192_EV1 - bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" - depends on MACH_SMDK6410 - depends on I2C=y - select MFD_WM831X - select MFD_WM831X_I2C - select REGULATOR - select REGULATOR_WM831X - help - The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC - daughtercard for the Samsung SMDK6410 reference platform. - Enabling this option will build support for this module into - the kernel. The presence of the daughtercard will be - detected at runtime so the resulting kernel can be used - with or without the 1192-EV1 fitted. - -config MACH_NCP - bool "NCP" - depends on ATAGS - select CPU_S3C6410 - select S3C64XX_SETUP_I2C1 - select S3C_DEV_HSMMC1 - select S3C_DEV_I2C1 - help - Machine support for the Samsung NCP - -config MACH_HMT - bool "Airgoo HMT" - depends on ATAGS - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C_DEV_FB - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_PWM - help - Machine support for the Airgoo HMT - -config MACH_SMARTQ - bool - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_USB_PHY - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HWMON - select S3C_DEV_RTC - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Shared machine support for SmartQ 5/7 - -config MACH_SMARTQ5 - bool "SmartQ 5" - depends on ATAGS - select MACH_SMARTQ - help - Machine support for the SmartQ 5 - -config MACH_SMARTQ7 - bool "SmartQ 7" - depends on ATAGS - select MACH_SMARTQ - help - Machine support for the SmartQ 7 - -config MACH_WLF_CRAGG_6410 - bool "Wolfson Cragganmore 6410" - depends on ATAGS - depends on I2C=y - select CPU_S3C6410 - select LEDS_GPIO_REGISTER - select S3C64XX_DEV_SPI0 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_I2C1 - select S3C64XX_SETUP_IDE - select S3C64XX_SETUP_KEYPAD - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_SPI - select S3C64XX_SETUP_USB_PHY - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - help - Machine support for the Wolfson Cragganmore S3C6410 variant. - -config MACH_S3C64XX_DT - bool "Samsung S3C6400/S3C6410 machine using Device Tree" - select CPU_S3C6400 - select CPU_S3C6410 - select PINCTRL - select PINCTRL_S3C64XX - help - Machine support for Samsung S3C6400/S3C6410 machines with Device Tree - enabled. - Select this if a fdt blob is available for your S3C64XX SoC based - board. - Note: This is under development and not all peripherals can be - supported with this machine file. - -endif -- cgit