From a0ea298d325616b58760c5182705df76912e0d73 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Thu, 15 Jan 2015 02:32:26 +0100 Subject: ARM: 8281/1: sa1100: move GPIO-related IRQ code to gpio driver As a part of driver consolidation, move GPIO-related IRQ code to drivers/gpio/gpio-sa1100.c. The code does not use GPIOLIB_IRQCHIP (yet), because sa1100 does not have a device for gpios, which is a requirement for GPIOLIB_IRQCHIP. This will be the next step. Signed-off-by: Dmitry Eremin-Solenikov Tested-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-sa1100/irq.c | 174 --------------------------------------------- 1 file changed, 174 deletions(-) (limited to 'arch/arm/mach-sa1100') diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index a9dfe8e16d95..a7d116af4a4f 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -80,138 +80,6 @@ static struct irq_domain_ops sa1100_normal_irqdomain_ops = { static struct irq_domain *sa1100_normal_irqdomain; -/* - * SA1100 GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. - * Use this instead of directly setting GRER/GFER. - */ -static int GPIO_IRQ_rising_edge; -static int GPIO_IRQ_falling_edge; -static int GPIO_IRQ_mask; - -static int sa1100_gpio_type(struct irq_data *d, unsigned int type) -{ - unsigned int mask; - - mask = BIT(d->hwirq); - - if (type == IRQ_TYPE_PROBE) { - if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) - return 0; - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - if (type & IRQ_TYPE_EDGE_RISING) { - GPIO_IRQ_rising_edge |= mask; - } else - GPIO_IRQ_rising_edge &= ~mask; - if (type & IRQ_TYPE_EDGE_FALLING) { - GPIO_IRQ_falling_edge |= mask; - } else - GPIO_IRQ_falling_edge &= ~mask; - - GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; - GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; - - return 0; -} - -/* - * GPIO IRQs must be acknowledged. - */ -static void sa1100_gpio_ack(struct irq_data *d) -{ - GEDR = BIT(d->hwirq); -} - -static void sa1100_gpio_mask(struct irq_data *d) -{ - unsigned int mask = BIT(d->hwirq); - - GPIO_IRQ_mask &= ~mask; - - GRER &= ~mask; - GFER &= ~mask; -} - -static void sa1100_gpio_unmask(struct irq_data *d) -{ - unsigned int mask = BIT(d->hwirq); - - GPIO_IRQ_mask |= mask; - - GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; - GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; -} - -static int sa1100_gpio_wake(struct irq_data *d, unsigned int on) -{ - if (on) - PWER |= BIT(d->hwirq); - else - PWER &= ~BIT(d->hwirq); - return 0; -} - -/* - * This is for GPIO IRQs - */ -static struct irq_chip sa1100_gpio_chip = { - .name = "GPIO", - .irq_ack = sa1100_gpio_ack, - .irq_mask = sa1100_gpio_mask, - .irq_unmask = sa1100_gpio_unmask, - .irq_set_type = sa1100_gpio_type, - .irq_set_wake = sa1100_gpio_wake, -}; - -static int sa1100_gpio_irqdomain_map(struct irq_domain *d, - unsigned int irq, irq_hw_number_t hwirq) -{ - irq_set_chip_and_handler(irq, &sa1100_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static struct irq_domain_ops sa1100_gpio_irqdomain_ops = { - .map = sa1100_gpio_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -static struct irq_domain *sa1100_gpio_irqdomain; - -/* - * IRQ 0-11 (GPIO) handler. We enter here with the - * irq_controller_lock held, and IRQs disabled. Decode the IRQ - * and call the handler. - */ -static void -sa1100_gpio_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned int mask; - - mask = GEDR; - do { - /* - * clear down all currently active IRQ sources. - * We will be processing them all. - */ - GEDR = mask; - - irq = IRQ_GPIO0; - do { - if (mask & 1) - generic_handle_irq(irq); - mask >>= 1; - irq++; - } while (mask); - - mask = GEDR; - } while (mask); -} - static struct resource irq_resource = DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs"); @@ -238,17 +106,6 @@ static int sa1100irq_suspend(void) IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2| IC_GPIO1|IC_GPIO0); - /* - * Set the appropriate edges for wakeup. - */ - GRER = PWER & GPIO_IRQ_rising_edge; - GFER = PWER & GPIO_IRQ_falling_edge; - - /* - * Clear any pending GPIO interrupts. - */ - GEDR = GEDR; - return 0; } @@ -260,9 +117,6 @@ static void sa1100irq_resume(void) ICCR = st->iccr; ICLR = st->iclr; - GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; - GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; - ICMR = st->icmr; } } @@ -307,11 +161,6 @@ void __init sa1100_init_irq(void) /* all IRQs are IRQ, not FIQ */ ICLR = 0; - /* clear all GPIO edge detects */ - GFER = 0; - GRER = 0; - GEDR = -1; - /* * Whatever the doc says, this has to be set for the wait-on-irq * instruction to work... on a SA1100 rev 9 at least. @@ -322,29 +171,6 @@ void __init sa1100_init_irq(void) 32, IRQ_GPIO0_SC, &sa1100_normal_irqdomain_ops, NULL); - sa1100_gpio_irqdomain = irq_domain_add_simple(NULL, - 28, IRQ_GPIO0, - &sa1100_gpio_irqdomain_ops, NULL); - - /* - * Install handlers for GPIO 0-10 edge detect interrupts - */ - irq_set_chained_handler(IRQ_GPIO0_SC, sa1100_gpio_handler); - irq_set_chained_handler(IRQ_GPIO1_SC, sa1100_gpio_handler); - irq_set_chained_handler(IRQ_GPIO2_SC, sa1100_gpio_handler); - irq_set_chained_handler(IRQ_GPIO3_SC, sa1100_gpio_handler); - irq_set_chained_handler(IRQ_GPIO4_SC, sa1100_gpio_handler); - irq_set_chained_handler(IRQ_GPIO5_SC, sa1100_gpio_handler); - irq_set_chained_handler(IRQ_GPIO6_SC, sa1100_gpio_handler); - irq_set_chained_handler(IRQ_GPIO7_SC, sa1100_gpio_handler); - irq_set_chained_handler(IRQ_GPIO8_SC, sa1100_gpio_handler); - irq_set_chained_handler(IRQ_GPIO9_SC, sa1100_gpio_handler); - irq_set_chained_handler(IRQ_GPIO10_SC, sa1100_gpio_handler); - /* - * Install handler for GPIO 11-27 edge detect interrupts - */ - irq_set_chained_handler(IRQ_GPIO11_27, sa1100_gpio_handler); - set_handle_irq(sa1100_handle_irq); sa1100_init_gpio(); -- cgit