From 47ef030c3a796e07fec12c6981bbb46bcb258e2e Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sun, 19 Jan 2020 10:31:03 -0600 Subject: arm64: dts: allwinner: pinebook: Fix backlight regulator The output from the backlight regulator is labeled as "VBKLT" in the schematic. Using the equation and resistor values from the schematic, the output is approximately 18V, not 3.3V. Since the regulator in use (SS6640STR) is a boost regulator powered by PS (battery or AC input), which are both >3.3V, the output could not be 3.3V anyway. Signed-off-by: Samuel Holland Signed-off-by: Maxime Ripard --- .../arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 1ec39120323f..313f4e6edc19 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -21,22 +21,13 @@ ethernet0 = &rtl8723cs; }; - vdd_bl: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "bl-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - enable-active-high; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 50000 0>; brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; default-brightness-level = <2>; enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ - power-supply = <&vdd_bl>; + power-supply = <®_vbklt>; }; chosen { @@ -57,6 +48,15 @@ }; }; + reg_vbklt: vbklt { + compatible = "regulator-fixed"; + regulator-name = "vbklt"; + regulator-min-microvolt = <18000000>; + regulator-max-microvolt = <18000000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ -- cgit