From aaa080fa7e0f01f7cd8eb22a7385a4d8106c7478 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 14 Jul 2018 21:37:25 +0200 Subject: ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset. There are two variants: - 1 GiB or 2 GiB of DDR3 memory - 8 GB or 16 GB eMMC flash Both variants come with: - 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not support Bluetooth) - an LED 7 segment display with an FD628 controller - HDMI and AV (CVBS) output - 2x USB (utilizing both USB ports provided by the SoC) - micro SD card slot - serial console (uart_AO) has to be soldered after opening the case The board seems to be very similar to the P23x and Q20x reference boards, which is why it includes meson-gx-p23x-q20x.dtsi: - eMMC reset routed to BOOT_9 - the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference clock is 32.768KHz on PWM_E - SD card detection is routed to CARD_6 - vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT) - uart_AO can be accessed after opening the case and soldering RX, TX and GND lines onto the exposed solder points (marked with RX, TX and GND) Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64/boot/dts/amlogic/Makefile') diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index e55156dec237..a97c0e2d7bc6 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb -- cgit