From 4153f7811a9b2b6f65f9ba5470d4f3e020ad1b7c Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 17 Sep 2020 20:54:48 +0200 Subject: arm64: dts: imx8mn: correct interrupt flags GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW For level low interrupts, enable also internal pull up. It is required at least on imx8mm-evk, according to schematics. Signed-off-by: Krzysztof Kozlowski Acked-By: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi') diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 7f4b904e9982..4aa0dbd578df 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -225,7 +225,7 @@ pinctrl_pmic: pmicirqgrp { fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 >; }; -- cgit