From c043dee9cb6bc332746cd60ec42d5f8220d90332 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 17 Sep 2020 20:52:11 +0200 Subject: arm64: dts: rockchip: correct interrupt flags on rk3399 boards GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200917185211.5483-2-krzk@kernel.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index 7ba3ed24084b..46c4581deb8d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include +#include #include #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -682,7 +683,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; - interrupts = ; + interrupts = ; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; -- cgit