From dabea675faf16e8682aa478ff3ce65dd775620bc Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Thu, 8 Apr 2021 13:02:18 +0200 Subject: arm64: dts: ls1028a: fix memory node While enabling EDAC support for the LS1028A it was discovered that the memory node has a wrong endianness setting as well as a wrong interrupt assignment. Fix both. This was tested on a sl28 board. To force ECC errors, you can use the error injection supported by the controller in hardware (with CONFIG_EDAC_DEBUG enabled): # enable error injection $ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl # flip lowest bit of the data $ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC") Signed-off-by: Michael Walle Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64/boot/dts') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index eca06a0c3cf8..a30249ebffa8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -197,8 +197,8 @@ ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; - interrupts = ; - big-endian; + interrupts = ; + little-endian; }; dcfg: syscon@1e00000 { -- cgit