From 4035ff36a6e0a07a1f0b0609520e17bd69a74c8b Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Tue, 20 Aug 2019 07:29:01 +0000 Subject: arm64: dts: fsl: Remove num-lanes property from PCIe nodes Remove the num-lanes property to avoid the driver setting the link width. On FSL Layerscape SoCs, the number of lanes assigned to PCIe controller is not fixed, it is determined by the selected SerDes protocol in the RCW (Reset Configuration Word). The PCIe link training is completed automatically through the selected SerDes protocol - the link width set-up is updated by hardware after power on reset, so the num-lanes property is not needed for Layerscape PCIe. The current num-lanes property was added erroneously, which actually indicates the maximum lanes the PCIe controller can support up to, instead of the lanes assigned to the PCIe controller. The link width set by SerDes protocol will be overridden by the num-lanes property, hence the subsequent re-training will fail when the assigned lanes do not match the value in the num-lanes property. Remove the property to fix the issue Signed-off-by: Hou Zhiqiang Signed-off-by: Lorenzo Pieralisi Reviewed-by: Andrew Murray --- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 - arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6 ------ arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 3 --- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ---- 5 files changed, 17 deletions(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index ec6257a5b251..119c597ca867 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -486,7 +486,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - num-lanes = <4>; num-viewport = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 71d9ed9ff985..c084c7a4b6a6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -677,7 +677,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -704,7 +703,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -731,7 +729,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index b0ef08b090dd..d4c1da3d4bde 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -649,7 +649,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -671,7 +670,6 @@ reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; - num-lanes = <2>; status = "disabled"; }; @@ -687,7 +685,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -709,7 +706,6 @@ reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; - num-lanes = <2>; status = "disabled"; }; @@ -725,7 +721,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -747,7 +742,6 @@ reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; - num-lanes = <2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index dacd8cf03a7f..ce48a2323337 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -452,7 +452,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <256>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -478,7 +477,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -504,7 +502,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <8>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 3ace91945b72..d4993a2b404f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -634,7 +634,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -656,7 +655,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -678,7 +676,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <8>; num-viewport = <256>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -700,7 +697,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; -- cgit From dbb72e2c305b269652eb97fb3544fcb474096a2a Mon Sep 17 00:00:00 2001 From: Vidya Sagar Date: Thu, 5 Sep 2019 16:15:52 +0530 Subject: arm64: tegra: Add configuration for PCIe C5 sideband signals Add support to configure PCIe C5's sideband signals PERST# and CLKREQ# as output and bi-directional signals respectively which unlike other PCIe controllers sideband signals are not configured by default. Signed-off-by: Vidya Sagar Signed-off-by: Lorenzo Pieralisi Reviewed-by: Andrew Murray --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 38 +++++++++++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index adebbbf36bd0..3c0cf54f0aab 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -3,8 +3,9 @@ #include #include #include -#include +#include #include +#include #include / { @@ -130,6 +131,38 @@ }; }; + pinmux: pinmux@2430000 { + compatible = "nvidia,tegra194-pinmux"; + reg = <0x2430000 0x17000 + 0xc300000 0x4000>; + + status = "okay"; + + pex_rst_c5_out_state: pex_rst_c5_out { + pex_rst { + nvidia,pins = "pex_l5_rst_n_pgg1"; + nvidia,schmitt = ; + nvidia,lpdr = ; + nvidia,enable-input = ; + nvidia,io-high-voltage = ; + nvidia,tristate = ; + nvidia,pull = ; + }; + }; + + clkreq_c5_bi_dir_state: clkreq_c5_bi_dir { + clkreq { + nvidia,pins = "pex_l5_clkreq_n_pgg0"; + nvidia,schmitt = ; + nvidia,lpdr = ; + nvidia,enable-input = ; + nvidia,io-high-voltage = ; + nvidia,tristate = ; + nvidia,pull = ; + }; + }; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -1365,6 +1398,9 @@ num-viewport = <8>; linux,pci-domain = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>, <&bpmp TEGRA194_CLK_PEX1_CORE_5M>; clock-names = "core", "core_m"; -- cgit From 09a0774a183d4d9fdfa3d6e471fe09982cac2702 Mon Sep 17 00:00:00 2001 From: Vidya Sagar Date: Thu, 5 Sep 2019 16:15:53 +0530 Subject: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform Add 3.3V and 12V supplies regulators information of x16 PCIe slot in p2972-0000 platform which is owned by C5 controller and also enable C5 controller. Signed-off-by: Vidya Sagar Signed-off-by: Lorenzo Pieralisi Reviewed-by: Andrew Murray --- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 24 ++++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 4 +++- 2 files changed, 27 insertions(+), 1 deletion(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 62e07e1197cc..4c38426a6969 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -289,5 +289,29 @@ gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_3v3_pcie: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + + regulator-name = "PEX_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; + + vdd_12v_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + + regulator-name = "VDD_12V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + regulator-boot-on; + enable-active-low; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 23597d53c9c9..d47cd8c4dd24 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -93,9 +93,11 @@ }; pcie@141a0000 { - status = "disabled"; + status = "okay"; vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, -- cgit