From ea452678734eb782126f999bf5c4fb3e71d3b196 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 3 May 2017 16:11:33 +0200 Subject: arm64: dts: hikey: Fix WiFi support The description of the connection between the dwmmc (SDIO) controller and the Wifi chip, which is attached to the SDIO bus is wrong. Currently the SDIO card can't be detected and thus the Wifi doesn't work. Let's fix this by assigning the correct vmmc supply, which is the always on regulator VDD_3V3 and remove the WLAN enable regulator altogether. Then to properly deal with the power on/off sequence, add a mmc-pwrseq node to describe the resources needed to detect the SDIO card. Except for the WLAN enable GPIO and its corresponding assert/de-assert delays, the mmc-pwrseq node also contains a handle to a clock provided by the hi655x pmic. This clock is also needed to be able to turn on the WiFi chip. Signed-off-by: Ulf Hansson Acked-by: Arnd Bergmann --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 5132d8ed4664..49f6a6242cf9 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -111,6 +111,15 @@ vin-supply = <®_sys_5v>; }; + wl1835_pwrseq: wl1835-pwrseq { + compatible = "mmc-pwrseq-simple"; + /* WLAN_EN GPIO */ + reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + clocks = <&pmic>; + clock-names = "ext_clock"; + power-off-delay-us = <10>; + }; + soc { spi0: spi@f7106000 { status = "ok"; @@ -307,11 +316,10 @@ }; dwmmc_2: dwmmc2@f723f000 { - broken-cd; bus-width = <0x4>; non-removable; - /* WL_EN */ - vmmc-supply = <&wlan_en_reg>; + vmmc-supply = <®_vdd_3v3>; + mmc-pwrseq = <&wl1835_pwrseq>; #address-cells = <0x1>; #size-cells = <0x0>; @@ -323,18 +331,6 @@ interrupts = <3 IRQ_TYPE_EDGE_RISING>; }; }; - - wlan_en_reg: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - /* WLAN_EN GPIO */ - gpio = <&gpio0 5 0>; - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; }; leds { -- cgit