From 1ed181f248dbd26ee1bbbb1e7a61e94f875191ed Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 27 May 2010 22:33:46 +0000 Subject: Blackfin: move MPU anomaly check to common location Keep all anomaly/arch checks in one place to keep logic simple. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-common/arch_checks.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch/blackfin/mach-common') diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index f2ca211a76a0..92a5c51a7f10 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -1,7 +1,7 @@ /* * Do some checking to make sure things are OK * - * Copyright 2007-2009 Analog Devices Inc. + * Copyright 2007-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -47,6 +47,10 @@ # error "The kernel load address is too high; keep it below 10meg for safety" #endif +#if ANOMALY_05000263 && defined(CONFIG_MPU) +# error the MPU will not function safely while Anomaly 05000263 applies +#endif + #if ANOMALY_05000448 # error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes. #endif -- cgit