From 2d24b532f95b8b1b61bf670ef5bdee52bcf59640 Mon Sep 17 00:00:00 2001 From: Steven King Date: Mon, 30 Jun 2014 09:53:19 -0700 Subject: m68knommu: platform support for i2c devices on ColdFire SoC These changes based on work by Steven King to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer Tested-by: Angelo Dureghello --- arch/m68k/coldfire/m53xx.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'arch/m68k/coldfire/m53xx.c') diff --git a/arch/m68k/coldfire/m53xx.c b/arch/m68k/coldfire/m53xx.c index 2502f63960bc..cf1917934b8a 100644 --- a/arch/m68k/coldfire/m53xx.c +++ b/arch/m68k/coldfire/m53xx.c @@ -38,7 +38,7 @@ DEFINE_CLK(0, "edma", 17, MCF_CLK); DEFINE_CLK(0, "intc.0", 18, MCF_CLK); DEFINE_CLK(0, "intc.1", 19, MCF_CLK); DEFINE_CLK(0, "iack.0", 21, MCF_CLK); -DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK); +DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK); DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK); DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK); DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK); @@ -77,7 +77,7 @@ struct clk *mcf_clks[] = { &__clk_0_18, /* intc.0 */ &__clk_0_19, /* intc.1 */ &__clk_0_21, /* iack.0 */ - &__clk_0_22, /* mcfi2c.0 */ + &__clk_0_22, /* imx1-i2c.0 */ &__clk_0_23, /* mcfqspi.0 */ &__clk_0_24, /* mcfuart.0 */ &__clk_0_25, /* mcfuart.1 */ @@ -133,7 +133,7 @@ static struct clk * const disable_clks[] __initconst = { &__clk_0_8, /* mcfcan.0 */ &__clk_0_12, /* fec.0 */ &__clk_0_17, /* edma */ - &__clk_0_22, /* mcfi2c.0 */ + &__clk_0_22, /* imx1-i2c.0 */ &__clk_0_23, /* mcfqspi.0 */ &__clk_0_30, /* mcftmr.2 */ &__clk_0_31, /* mcftmr.3 */ @@ -176,6 +176,19 @@ static void __init m53xx_qspi_init(void) /***************************************************************************/ +static void __init m53xx_i2c_init(void) +{ +#if IS_ENABLED(CONFIG_I2C_IMX) + /* setup Port AS Pin Assignment Register for I2C */ + /* set PASPA0 to SCL and PASPA1 to SDA */ + u8 r = readb(MCFGPIO_PAR_FECI2C); + r |= 0x0f; + writeb(r, MCFGPIO_PAR_FECI2C); +#endif /* IS_ENABLED(CONFIG_I2C_IMX) */ +} + +/***************************************************************************/ + static void __init m53xx_uarts_init(void) { /* UART GPIO initialization */ @@ -218,6 +231,7 @@ void __init config_BSP(char *commandp, int size) m53xx_uarts_init(); m53xx_fec_init(); m53xx_qspi_init(); + m53xx_i2c_init(); #ifdef CONFIG_BDM_DISABLE /* -- cgit