From 2d24b532f95b8b1b61bf670ef5bdee52bcf59640 Mon Sep 17 00:00:00 2001 From: Steven King Date: Mon, 30 Jun 2014 09:53:19 -0700 Subject: m68knommu: platform support for i2c devices on ColdFire SoC These changes based on work by Steven King to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer Tested-by: Angelo Dureghello --- arch/m68k/coldfire/m54xx.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/m68k/coldfire/m54xx.c') diff --git a/arch/m68k/coldfire/m54xx.c b/arch/m68k/coldfire/m54xx.c index 386df3b68cdf..c552851ec617 100644 --- a/arch/m68k/coldfire/m54xx.c +++ b/arch/m68k/coldfire/m54xx.c @@ -37,6 +37,7 @@ DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK); DEFINE_CLK(mcfuart3, "mcfuart.3", MCF_BUSCLK); +DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK); struct clk *mcf_clks[] = { &clk_pll, @@ -47,6 +48,7 @@ struct clk *mcf_clks[] = { &clk_mcfuart1, &clk_mcfuart2, &clk_mcfuart3, + &clk_mcfi2c0, NULL }; @@ -65,6 +67,20 @@ static void __init m54xx_uarts_init(void) /***************************************************************************/ +static void __init m54xx_i2c_init(void) +{ +#if IS_ENABLED(CONFIG_I2C_IMX) + u32 r; + + /* set the fec/i2c/irq pin assignment register for i2c */ + r = readl(MCF_PAR_FECI2CIRQ); + r |= MCF_PAR_FECI2CIRQ_SDA | MCF_PAR_FECI2CIRQ_SCL; + writel(r, MCF_PAR_FECI2CIRQ); +#endif /* IS_ENABLED(CONFIG_I2C_IMX) */ +} + +/***************************************************************************/ + static void mcf54xx_reset(void) { /* disable interrupts and enable the watchdog */ @@ -86,6 +102,7 @@ void __init config_BSP(char *commandp, int size) mach_reset = mcf54xx_reset; mach_sched_init = hw_timer_init; m54xx_uarts_init(); + m54xx_i2c_init(); } /***************************************************************************/ -- cgit